Audioengine HD6 Built-in USB 24-Bit DAC & Analog Amplifier Speakers

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The maximum distance over which a device can reliably transmit or receive signals using Bluetooth technology, expressed in meters. This value represents the effective coverage under typical operating conditions and helps users compare wireless range across devices.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The linear measurement across the widest part of a speaker’s driver (the diaphragm or cone). It is expressed in units of length such as millimeters, centimeters, or inches and indicates the size of the component that produces sound. This value helps users compare drivers across different models and assess compatibility with accessories or enclosure designs.

The span of frequencies, expressed in hertz (Hz), that a device can operate within or respond to. It may be given as a single value, a numeric range (e.g., "20 000‑50 000 Hz"), or an open‑ended interval such as "2.4 GHz+" indicating the lower bound only.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

The total count of individual driver units included in the product package or device. It indicates how many separate speakers, motors, or other driving components are present, allowing users to assess audio capability, performance, or mechanical complexity.

The maximum power that a speaker or audio system can deliver during music playback, expressed in watts (W). It represents the peak level of audio output achievable under optimal conditions and is useful for comparing loudness performance across models.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

A brief statement of the intended or most suitable use cases for a product, such as the type of environment (indoor, outdoor), activity (gaming, office work, music listening) or general application category. It helps customers quickly determine whether the item fits their needs.

The method or mechanism used to operate a device remotely, such as infrared (IR), Bluetooth, Wi‑Fi, radio frequency, or wired connections. It indicates how the user can send commands to the product from a distance.

The root‑mean‑square (RMS) power rating of a device, expressed in watts (W). It represents the average electrical power that the product can deliver or consume under normal operating conditions.

The ratio of the desired signal level to the background noise level, expressed in decibels (dB). It indicates how clearly a device can transmit or receive audio or other signals relative to unwanted interference. A higher value means better clarity and fidelity.

A list of the positions or mounting options where a speaker can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.

The overall distortion introduced by a device, expressed as a percentage of the total output signal. It represents the ratio of all harmonic components to the fundamental frequency and indicates how much the waveform deviates from a perfect sine wave.

Indica si el altavoz incluye un tweeter, componente que reproduce frecuencias altas para mejorar la claridad y detalle del sonido.

The linear measurement across the widest part of a tweeter, expressed in units such as millimeters or centimeters. It indicates the size of the tweeter’s diaphragm and helps users compare compatibility with speakers, enclosures, and audio systems.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The linear measurement across the widest part of a woofer driver, expressed in units such as millimeters, centimeters or inches. It represents the physical width of the driver and is useful for determining fit, compatibility with enclosures, and comparing performance characteristics.