Steiner Wildlife 10x42 Binocular - Razor Sharp Image Clarity

The primary way a product is carried or supported, such as by hand, shoulder strap, backpack, belt, or other carrying mechanisms. This attribute helps users understand how the item can be transported and what accessories are required.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indica si un dispositivo electrónico cuenta con una brújula digital, es decir, un sensor que determina la orientación respecto al norte magnético y muestra esa información en pantalla o a través de indicadores visuales. El valor puede ser "Sí" cuando la función está presente y "No" cuando no lo tiene.

The exit pupil diameter is the linear size of the opening through which light exits an optical device, measured in millimetres (mm). It indicates how much light can pass through the system and affects brightness and field of view. This measurement helps users compare compatibility with lenses, filters or accessories that require a specific aperture.

The field of view at a distance of 1000 metres indicates the maximum horizontal angle or linear extent that an observer can see with an optical device when positioned 1000 metres away. It is expressed in degrees or as a linear measurement (e.g., metres) and allows comparison of how wide a telescope, binoculars or other sighting instrument can cover at that distance.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether a lens cap is supplied with the product. A value of "Yes" means a lens cap is included in the package, while "No" indicates that no lens cap is provided and must be purchased separately.

The optical magnification factor of a device such as a camera lens, binoculars or telescope. It indicates how many times larger an object appears compared to its actual size when viewed through the product. Values are expressed as a multiplier (e.g., 2x, 10x).

The optical prism configuration used in a binocular, monocular or other optical device. It indicates whether the instrument employs a roof prism, Porro prism, BaK‑4, BK‑7, Schmidt‑Pechan or similar design, which affects image quality, size and weight.

Indicates whether the product is suitable for use with a digiscoper, a device that captures images or video through a camera lens. A value of "Yes" means the item can be used safely and effectively with a digiscoper; a value of "No" indicates it is not designed for such use.

Indicates whether a product can be securely attached to a tripod using the standard mounting interface. The value is typically "Yes" or "No", and may also include a measurement such as "1/4‑inch” or “3/8‑inch” to specify the size of the mounting screw required.

Indicates the optical magnification provided by a binocular or monocular when viewing in low‑light conditions, expressed as a plain number (e.g., 15.8). The value represents how many times larger the image appears compared to the naked eye.

Indicates whether the product is resistant to water or moisture exposure. A value of "Yes" means the item can withstand contact with water under specified conditions, while "No" indicates it is not water‑resistant.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.