D-Link DGS-1210-10MP Network Switch with 2 Gigabit SFP Ports

A list of authentication mechanisms that a device or service can use to verify users or devices, such as RADIUS, TACACS+, SSH, EAP, LDAP, and other protocols. The value is a comma‑separated string where each entry represents an individual method available for secure access.

The highest electrical power, expressed in watts (W), that a device can supply to connected equipment at any given time. It represents the total PoE budget available for powering attached devices such as switches, access points, or cameras.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The overall size of a product expressed as width × height × depth, typically in centimeters or inches. This attribute indicates the physical envelope that the item occupies and helps customers determine whether it will fit into a desired space, shipping container, or storage area.

A list of cryptographic and authentication methods that the device can use for secure network communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Maximum Ethernet frame size that the device can handle when jumbo frames are enabled, expressed in bytes or kilobytes. A higher value indicates support for larger network packets, which can improve throughput for certain applications.

The maximum number of MAC address entries that a networking device can store in its forwarding table. This value indicates the capacity of the switch or hub to learn and forward traffic based on MAC addresses, affecting how many unique devices can be connected before the table must be refreshed or overflowed.

The range of relative humidity, expressed as a percentage, within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "20-80%" and indicate the acceptable environmental moisture level for optimal performance.

A list describing the physical connectors or interfaces present on a product, including their type (e.g., USB, RJ‑45, HDMI) and the quantity for each type. Each entry is a short phrase such as "4 x USB 3.0" or "2 x RJ‑45", allowing users to see at a glance what ports are available and how many of each. This attribute captures both the port category and its count in a single string, making it suitable for products that offer multiple port types with varying numbers.

Cantidad de energía eléctrica que consume o suministra el producto durante su funcionamiento, expresada en unidades de potencia como vatios (W), kilovatios (kW) u otras equivalentes. Este valor indica la potencia máxima requerida por el dispositivo y permite comparar eficiencia energética, dimensionar fuentes de alimentación y estimar costos operativos.

Lista de los protocolos que un dispositivo puede usar para la configuración, supervisión o mantenimiento remoto. Cada valor indica un protocolo individual (por ejemplo, SNMP, HTTP/HTTPS, Telnet, SSH) y permite al usuario saber cómo acceder a las funciones administrativas del equipo.

A list of routing protocols that the device can use or support, such as static IPv4/IPv6 routing, RIP, RIP-2, IGMP, MLD, VRRP, ECMP, and other network routing mechanisms. Each entry represents a distinct protocol or group of protocols that the product is capable of configuring or participating in.

A list of the operational states that an LED indicator on a device can show, such as power status, activity, link, or other functional signals. Each entry represents a distinct status that the LED may display when the device is in use.

The specific type of network interface supported by a device, such as Gigabit Ethernet or DisplayPort. This attribute helps users identify the connectivity options available for data transfer and compatibility with other equipment.

The general category or model class of a product, such as "UPS – external", "Switch – 16 ports – unmanaged" or "Wireless access point". It identifies the primary function and form factor of the item so that users can quickly compare similar devices across brands and specifications.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.