Seagate BarraCuda 1TB,Internal,8.89 cm (3.5") (ST1000DM010) Desktop HDD

The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.

The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.

The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

A list of formal recognitions, compliance marks, or standards that a product meets. Each entry may be a single certification (e.g., "RoHS") or a group of related certifications separated by commas (e.g., "CE, FCC, RoHS"). The attribute captures all applicable regulatory, environmental, safety, and quality approvals for the item.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render the visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

The maximum rotational speed of a hard‑disk drive’s spindle, expressed in revolutions per minute (RPM). This value indicates how fast the drive’s platters spin and is useful for comparing performance or suitability across different models.

The physical or logical interface used by a hard drive to connect with other components, such as SATA, SAS, USB, or PCI Express. It indicates the technology that enables data transfer and power delivery between the device and its host system.

A brief statement indicating the edition or version of a product, such as "Reprint", "New Edition", or a numeric edition number like "2nd edition". It identifies which specific release of the item is being referenced.

The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.

The total amount of internal flash storage available in a device, expressed as a digital capacity such as megabytes (MB) or gigabytes (GB). This attribute indicates how much data can be stored on the device’s non‑volatile memory for operating systems, applications, and user files.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The total count of read/write head assemblies present in a hard disk drive (HDD). Each head is responsible for accessing data on one platter surface; the number of heads determines how many platters can be serviced simultaneously and influences the drive’s capacity and performance. The value is an integer without any unit.

The intended use or application of a hard drive, such as "Desktop", "NAS", "Enterprise" or "Surveillance". This attribute helps customers quickly identify the appropriate type of storage for their needs.

The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.

The underlying storage technology used by the product, such as solid‑state drive (SSD), hard disk drive (HDD), embedded multi‑media card (eMMC) or a combination of these. It indicates the performance, durability and typical use cases for the device’s internal or external storage.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

Indicates whether the product is designed to be used in a Network Attached Storage (NAS) environment, such as supporting multiple drive bays and continuous operation.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.

The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.

The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.

The range of relative humidity (expressed as a percentage) within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

The mass, in grams, of a component or device that has been tested to determine its ability to withstand a non‑operating shock event. This value represents the total weight of the unit—including any internal parts and packaging if specified—used during the shock test.

Indicates whether the product is a solid‑state hybrid drive (SSHD), combining flash memory with a traditional spinning disk to provide faster access and larger capacity than a standard HDD.

The total count of times a device can be powered on and off during its expected lifetime or usage period. This value helps users gauge the durability and reliability of the product, especially for appliances that are frequently started and stopped.

Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.