56GB Kingston KC600 mSATA mSATA Solid State Drive

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

The electrical power drawn by a device while it is in standby mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.

Indicates the cryptographic method or algorithm used to protect data on the device, such as AES, WEP, or other encryption ciphers. The value is a free‑text string that may include the algorithm name and bit length (e.g., "AES 256-bit"), and can be presented in any case or format by the manufacturer.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.

The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.

The form or packaging of a memory module, such as DIMM, SO‑DIMM, USB flash drive, microSDHC, or other storage media. It indicates the physical format that determines compatibility with motherboards, devices, and accessories.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The maximum number of input/output operations per second that a storage device can perform when reading data in random 4‑kilobyte blocks. This metric reflects the device’s ability to quickly retrieve small amounts of information and is commonly used to compare SSDs, HDDs and other memory technologies.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A concise list of the minimum hardware, software, and firmware specifications required for a product to operate correctly. Each requirement is expressed in plain language and may include operating systems, processor types, memory size, storage capacity, graphics capabilities, or other relevant components. The list helps users verify that their environment meets the essential criteria before purchasing or installing the product.

The acceleration produced by a device when it is not in operation, expressed as a numeric value with the unit gram (g). It represents how much vibration the product generates during idle or standby conditions and can be used to assess mechanical stability and potential noise impact.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The maximum number of input/output operations per second that a storage device can perform when writing data randomly with 4‑kilobyte blocks. This metric indicates how quickly the device can handle small, non‑sequential write requests and is useful for evaluating performance in database or high‑transaction workloads.