Avocent ACS8016-EU-DAC-400 Console Server with RJ-45 connectors

Indicates whether a device supports the 4G LTE cellular network standard, allowing it to connect to compatible mobile broadband services.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

A list of the different AC power outlet or coupler types that a product supports, such as C13, C19, C20, Type F, Type G (BS 1363), NEMA 5‑15R, etc. Each entry represents a distinct electrical connector that can be used to supply power to the device.

A list of the cable categories or standards that a product can use, such as Cat5e, Cat6, Cat6a, Cat7, Fiber, HDMI, USB, etc. The values are separated by commas and represent the types of cables compatible with the device.

Represents how many console ports are physically present on the product. The value is a simple integer indicating the total count of console connectors, regardless of type or version.

A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.

The total amount of internal flash storage available in an embedded MultiMediaCard (eMMC) module, expressed as a digital capacity such as GB or MB. This attribute indicates how much data the device can hold on its built‑in eMMC memory and helps users compare storage options across products.

Represents the total count of Ethernet LAN (RJ‑45) interfaces available on a product. The value is an integer indicating how many physical Ethernet ports are present, regardless of speed or generation.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

Indicates whether the device supports filtering network traffic based on IP addresses. When enabled, the device can allow or block communication for specific IP addresses or ranges.

A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The processor architecture indicates the underlying instruction set and design family of a CPU, such as ARM Cortex‑A53 or MIPS64. It helps users understand compatibility with software, performance characteristics, and hardware requirements.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

Indicates whether a product is designed to be mounted in a rack system. The value can be "Yes" or "No", or it may specify the height occupied by the device using rack units (U) such as "1U", "2U", or a numeric measurement with unit, e.g., "61.25 mm".

The total amount of random‑access memory (RAM) available in a device or component, expressed as a digital capacity such as megabytes (MB), gigabytes (GB), or terabytes (TB). This attribute indicates how much information the system can hold for active processes and helps users compare performance across devices.

The type of memory (RAM) installed in the device, such as DDR3, DDR4, LPDDR4X, or LPDDR5. It indicates the memory architecture and generation used by the product, which affects performance, power consumption, and compatibility with motherboards or mobile platforms.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

Represents the count of external USB 2.0 (high‑speed) connectors available on a device. The value is an integer indicating how many USB 2.0 ports can be used for data transfer or power delivery from the outside of the product, regardless of internal placement or version.

Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.