Allied Telesis Managed L3 Ethernet Switch AT-x230-10GT-50

Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.

The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.

The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.

Indicates whether the product includes support for Access Control Lists (ACL), allowing administrators to define permissions and restrictions on resources or network traffic.

Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.

Represents how many combo SFP (Small Form-factor Pluggable) ports are physically present on the product. The value is a simple integer indicating the total count of these ports, regardless of speed or interface variant.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the device supports the DHCP client function, meaning it can automatically request an IP address and related network settings from a DHCP server.

A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.

Indicates whether the product can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

The amount of thermal energy a product can dissipate, expressed in a standard unit such as BTU per hour or watts. It indicates the cooling requirement and helps compare how much heat the device generates during operation.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Gibt an, ob ein Netzwerkgerät die IGMP‑Snooping-Funktion unterstützt, mit der Multicast-Verkehr effizient verwaltet wird.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

Indicates whether the device can combine multiple network connections into a single logical link to increase bandwidth or provide redundancy.

The total count of unique MAC addresses that the network device can store in its address table. This value indicates how many devices can be simultaneously connected and tracked by the switch or hub before additional entries must be discarded or the table expanded.

Indicates whether the product includes support for Management Information Base (MIB) files, which are used to manage and monitor network devices via SNMP.

Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.

A list of the networking protocols and standards that a device can support or comply with, such as IEEE 802.11 variants for wireless, IEEE 802.3 for Ethernet, or other relevant networking specifications. The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

Indicates whether the device supports port mirroring, a feature that allows one or more ports to copy traffic from another port for monitoring or analysis purposes.

The type of connector used to supply power to the device, such as AC‑in jack, DC‑in jack, USB Type‑C, SATA Power, or PCIe power connectors. It indicates the physical interface that delivers electrical energy to the product.

Gibt an, ob das Gerät die Technologie Power over Ethernet (PoE) unterstützt, mit der elektrische Energie über ein RJ‑45-Kabel zu verbundenen Geräten übertragen wird.

The colour(s) that a product displays, which may be a single dominant hue or a combination of hues such as "Black, Silver". The value is expressed in common colour names and can include multiple colours separated by commas.

Indicates whether a product is designed to be mounted in a rack system. The value is typically "Yes" or "No", but may also include a measurement such as "1U" or "2U" to specify the height occupied by the device.

A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.

Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.

The network layer(s) that a device can operate at, expressed as a string such as "L2", "L3" or combinations like "L2/L3". This attribute indicates the protocol stack level supported by the hardware or firmware.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

La velocidad a la que un dispositivo de red puede transferir datos entre sus puertos, expresada como una tasa de transferencia (por ejemplo, Gbps). Este atributo indica el rendimiento máximo teórico del conmutador o concentrador y ayuda a comparar dispositivos según su capacidad para manejar tráfico de red.

Indicates whether the device records system events, such as errors, warnings, or informational messages, in a log that can be accessed for troubleshooting or monitoring purposes.

The maximum rate at which a device can process or transmit data, expressed in megabits per second (Mpps). It indicates the capacity of network equipment such as switches, routers, or hubs to handle traffic without bottlenecks.

The horizontal measurement of a component or part, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.