APC by Schneider Electric Back-UPS Standby UPS – 650 VA/400 W

Identifiers
MPN	APC by Schneider Electric BE650G2-UK
Dimensions / Weight
Key Features
Alarm Indicates whether the product includes an alarm feature that alerts the user when a relevant event occurs, such as door opening, movement, or other conditions requiring attention. The alarm can be audible, visual, or both, and its presence helps prevent energy loss and ensures safety.	Changing Utility Power
Audible alarm modes A list of audible alarm modes that a product can emit when an event occurs, such as battery replacement alerts or low‑battery warnings. Each value represents a distinct type of sound notification the device is capable of producing.	Alarm when on battery, Low battery alarm, Overload alarm
Audible alarm(s)	Yes
Automatic battery test Indicates whether a device can automatically perform a battery health or capacity assessment without user intervention. The feature typically runs diagnostics to verify battery performance, detect degradation, and report results.	Yes
Battery chemistry The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.	Lead Acid
Battery recharge time	16 h
Cable length The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.	1.83 m
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.	CE, EAC
Cold start Indicates whether the product can be started at a low temperature or in a cold environment without requiring pre‑heating or special preparation. A value of "Yes" means the device is designed to operate reliably when powered on from a cold state; "No" indicates it may need warming up before use.	Yes
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.	365 mm
Efficiency The efficiency rating expresses the percentage of input power that a product converts into useful output, indicating how well it uses energy compared to similar models. A higher value means less waste and lower operating costs.	80%
Form Factor Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.	Compact
Harmonized System HS code The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.	85078000
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.	120 mm
Hot-swap battery Indicates whether a UPS (Uninterruptible Power Supply) can have its internal battery or storage units inserted or removed while it is powered on and running, without needing to shut down or reboot the system. A value of "Yes" means hot‑swap is supported; "No" means it is not.	Yes
Input frequency	63 Hz
LED indicators A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.	Yes
Load capacity The maximum load that the product can safely support, expressed in a unit such as kilograms or pounds. The value may represent total capacity for the entire device or per drawer/section when applicable.	650 VA/400 W
Maximum current The highest electrical current that a device can safely draw from its power source, expressed in amperes (A). It indicates the maximum load the product is designed to handle during normal operation and helps users verify compatibility with power supplies or sockets.	6 A
Maximum input operation voltage The highest electrical voltage that a device can safely accept from its power source, expressed in volts (V). It indicates the maximum supply voltage compatible with the product and is used to ensure proper operation across different regions and power standards.	266 V
Maximum operating temperature The highest temperature at which a product can operate safely without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C). This attribute helps users verify that the device will remain within its thermal limits during normal use.	40°C
Maximum output operation voltage The highest electrical voltage that a device can safely produce or deliver on its output terminals, expressed in volts (V). It indicates the maximum output level for power supplies, UPS units, and other equipment where the user may need to know the peak voltage available for connected loads.	230 V
Minimum input operation voltage The lowest electrical voltage that the product is designed to accept from its power source, expressed in volts (V). It indicates the minimum mains or battery supply required for safe and reliable operation.	180 V
Minimum output operation voltage The lowest electrical voltage that a device’s output can provide or operate at, expressed in volts (V). It indicates the minimum supply level required for the product to function correctly and helps users verify compatibility with power sources and accessories.	220 V
Noise level The sound intensity produced by a product, expressed in decibels (dB) or sones. It indicates how loud the device is during operation and helps users assess suitability for quiet environments.	45 dB
Non-operating altitude The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.	0 - 4500 m
Output Power The electrical power that a device can deliver or consume, expressed in watts (W). It represents the actual power output under normal operating conditions and is useful for comparing performance across similar devices.	400 W
Output power capacity The maximum electrical power that a device can deliver or consume, expressed in volt‑amps (VA). It represents the apparent power rating of the product and is used to compare capacity across similar equipment.	0.65 kVA
Package depth The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.	441 mm
Package Height The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.	190 mm
Package width The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.	186 mm
Status indicators A list of the operational states that an LED indicator on a device can show, such as power status, activity, link, or other functional signals. Each entry represents a distinct status that the LED may display when the device is in use.	LED Status Display: On Line On Battery Replace Battery Overload
Storage temperature The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.	-15°C - 45°C
Surge energy rating The amount of electrical energy, measured in joules (J), that a device can absorb during a surge event before failure. It indicates the level of protection against voltage spikes and is useful for comparing surge protectors, UPS units, and other power‑conditioning equipment.	310 J
Surge protection features	Digital Subscriber Line (DSL)
Sustainability certificates A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.	RoHS
UPS topology	Standby (Offline)
USB port Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.	Yes
Waveform The electrical waveform type produced by the power supply, indicating how the output voltage varies over time. Common values include Sine, Square, and Triangle, each affecting noise levels and compatibility with sensitive equipment.	Sine
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.	4 kg
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	130 mm

APC by Schneider Electric is a brand of Schneider Electric, a global specialist in energy management and automation. Schneider Electric offers a wide range of energy-efficient solutions, from simple switches to data center infrastructure and beyond, to help businesses and individuals save energy and money. The APC by Schneider Electric brand is focused on delivering reliable, efficient power protection and management solutions for businesses and consumers. Products in the APC by Schneider Electric portfolio include uninterruptible power supplies (UPSs), power distribution units (PDUs), surge protectors, and energy management software.