APC SMT1500R2I-6W C14 Coupler UPS

A list of the different AC power outlet or coupler types that a product supports, such as C13, C19, C20, Type F, Type G (BS 1363), NEMA 5‑15R, etc. Each entry represents a distinct electrical connector that can be used to supply power to the device.

Indicates whether a device can automatically perform a battery health or capacity assessment without user intervention. The feature typically runs diagnostics to verify battery performance, detect degradation, and report results.

The total amount of electrical energy a battery can store, expressed as a numeric value with an appropriate unit such as mAh or Ah. It indicates how long the device can operate between charges and allows users to compare power supplies across products.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

Indicates whether the product can be started at a low temperature or in a cold environment without requiring pre‑heating or special preparation. A value of "Yes" means the device is designed to operate reliably when powered on from a cold state; "No" indicates it may need warming up before use.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The visual technology used by the product’s screen, such as LCD, LED, OLED, TFT or analog. It indicates the underlying display panel that determines image quality, color reproduction and power consumption.

The efficiency rating expresses the percentage of input power that a product converts into useful output, indicating how well it uses energy compared to similar models. A higher value means less waste and lower operating costs.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether a UPS (Uninterruptible Power Supply) can have its internal battery or storage units inserted or removed while it is powered on and running, without needing to shut down or reboot the system. A value of "Yes" means hot‑swap is supported; "No" means it is not.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The sound intensity produced by a product, expressed in decibels (dB) or sones. It indicates how loud the device is during operation and helps users assess suitability for quiet environments.

The electrical voltage that a product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device, covering both AC and DC inputs where applicable.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The electrical power that a device can deliver or consume, expressed in watts (W). It represents the actual power output under normal operating conditions and is useful for comparing performance across similar devices.

The maximum electrical power that a device can deliver or consume, expressed in volt‑amps (VA). It represents the apparent power rating of the product and is used to compare capacity across similar equipment.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The mass of the product’s packaging expressed in a standard unit such as grams or kilograms. It indicates how heavy the package is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

The type of electrical plug or socket that a device uses to connect to mains power. It indicates the physical connector shape, size and standard (e.g., C14 coupler, BS1363A, Type C). This attribute helps users identify compatible outlets, adapters or extension cords for the product.

Indicates whether a quick‑installation guide is provided with the product. A value of "Yes" means that a brief, step‑by‑step manual or overview is included to help users set up the device quickly; "No" indicates that no such guide is supplied.

The height of a device measured in rack units (U), where one U equals 1.75 inches (44.45 mm). The value is expressed as an integer such as "2U" or a numeric measurement with the unit, for example "3.5U" or "61.25 mm". This attribute indicates how many rack units a product occupies when installed in a standard server rack.

Indicates whether the product is a rack mounting kit and, if applicable, its compatibility with standard rack systems. The value can be "Yes" or "No", or it may include a measurement such as "1U" or "2U" to specify the height occupied by the kit when installed in a rack.

The total count of physical serial connectors (e.g., RS‑232, RS‑485) available on the product. This value is an integer that indicates how many serial interfaces are present, regardless of their specific model or duplex mode.

The type of serial communication interface supported by the product, such as RS‑232, RS‑485, RJ‑45, or SATA. It indicates which physical connectors and protocols are available for data exchange with other devices.

The amount of electrical energy, measured in joules (J), that a device can absorb during a surge event before failure. It indicates the level of protection against voltage spikes and is useful for comparing surge protectors, UPS units, and other power‑conditioning equipment.

The duration a device can operate on its internal power source while running at full load before it needs to be recharged or connected to an external supply. It is expressed in minutes, hours, or other standard time units and applies to devices such as UPS systems, battery‑powered equipment, and similar appliances.

The average time a device can operate on its internal battery or backup power source when running at half of its maximum load, expressed in minutes, hours, or other standard time units.

The electrical configuration of an uninterruptible power supply (UPS) that determines how it manages input power and supplies backup power to connected equipment. Common topologies include Line‑Interactive, Standby (Offline), and Double‑conversion (Online). This attribute helps users identify the protection level and performance characteristics of a UPS.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The electrical waveform type produced by the power supply, indicating how the output voltage varies over time. Common values include Sine, Square, and Triangle, each affecting noise levels and compatibility with sensitive equipment.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.