New Apple iPad Pro 12.9-inch Wi-Fi + Cellular 512GB - Silver

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

The type of buffering applied to a memory module, indicating whether the RAM is unbuffered (unregistered), buffered (registered), or fully buffered. This attribute helps users understand compatibility and performance characteristics for computer systems.

Indicates whether the product includes a built‑in hard drive that can be accessed directly without an external storage device. A value of "Yes" means the device has such a hard drive; a value of "No" means it does not.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

Indicates the gender or sex classification of a connector, such as Male, Female, or Unspecified. This attribute helps users identify whether a cable or port is designed for insertion (Male) or reception (Female).

The physical interface or port used to connect a device to another component, such as USB, HDMI, RJ‑45, audio jacks, or fiber optic connectors. It identifies the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The physical configuration or design of a connector that uses the second form factor standard (e.g., USB‑C, HDMI‑Type B). It indicates how the connector is shaped and mounted on devices, helping users determine compatibility with cables, adapters, and equipment.

Indicates whether the second end of a cable or connector is male, female, or another gender type. This value helps users determine compatibility with other components and ensures proper mating of connectors.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

Indicates whether a device can automatically switch between day and night settings or operate in a fixed mode. The value may be "Yes" or "No", or specify the type of automatic mode such as "Auto/Colour/BW" or simply "Colour".

The electrical potential difference that a device delivers to its load when operating on direct current (DC). It is expressed in volts (V) and indicates the nominal voltage supplied by the product’s DC output, helping users verify compatibility with accessories or systems that require a specific DC supply.

List of physical or logical interfaces that a device can use to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, and similar technologies. Each value represents an interface standard supported by the device.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

The physical interface used to connect a fan to a power or control source, such as 3‑pin, 4‑pin PWM, Molex, or other proprietary connectors. This value indicates the shape and pin configuration of the fan’s plug so that compatible power supplies, fans, or controllers can be selected.

The linear measurement across the widest part of a fan, expressed in units such as millimeters (mm), centimeters (cm) or inches (in). It represents the overall width of the fan and is useful for determining fit, compatibility with cases, and airflow characteristics.

Indicates whether the product is capable of displaying or transmitting video at Full HD resolution (1920 × 1080 pixels). A value of "Yes" means that Full HD functionality is supported, while a value of "No" indicates it is not available.

Indicates the target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

A collection of settings that can be modified to improve the visual appearance of an image or video, such as brightness, contrast, saturation, sharpness and other similar controls. Each value represents a distinct adjustment option available on the product.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

Indicates whether the product includes a key ring attachment or accessory that allows keys to be attached for easy carrying.

The specific kind of light-emitting diode technology used in the product, such as IR LED, RGB LED, COB LED, or addressable RGB LED. It indicates the emission characteristics and typical applications of the LED component.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

The highest static pressure that a product, such as a fan or cooling component, can generate or withstand, expressed in units of water column height (e.g., millimetres of water). This value indicates the maximum air‑pressure capability and helps users compare performance across similar devices.

The highest electrical current that a device can safely draw from its power source, expressed in amperes (A). It indicates the maximum load the product is designed to handle during normal operation and helps users verify compatibility with power supplies or sockets.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The highest speed at which a rotating component—such as a fan motor or spindle—can turn, expressed in revolutions per minute (RPM). This value indicates how fast the device operates and is useful for comparing performance or suitability across models.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The physical configuration or size classification of a memory module, such as SO‑DIMM, UDIMM, RDIMM, or on‑board. It indicates the form factor that determines compatibility with motherboards and other hardware components.

The minimum processor model required for a product to operate correctly. This attribute lists the specific CPU model or brand that meets the device’s baseline performance needs, such as "Intel Core i3-8100" or "AMD Ryzen 5 3600". It helps users verify compatibility and ensures the product will run with acceptable speed and features.

The smallest amount of system memory required for a product to operate correctly, expressed in gigabytes or megabytes. This value indicates the minimum RAM capacity that a device must have to run its software and hardware components without performance degradation.

A list of mobile operating systems that the product supports, including specific versions and architectures when relevant. Each value represents a distinct OS that is compatible with the device.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

Indicates whether the product is capable of capturing images or video in low‑light or darkness using infrared illumination, thermal imaging, or other night‑vision technologies.

The sound intensity produced by a product while operating at its lowest speed setting, expressed in decibels (dB). This value helps users assess how quiet the device is during light or idle operation.

Indicates whether the product includes a feature that reduces or eliminates unwanted ambient noise, such as active noise cancellation or built‑in sound‑absorbing technology.

The total count of individual cooling fans that are part of the product or its components. This value indicates how many separate fan units are installed, such as in a graphics card, CPU cooler, case, or other hardware assemblies.

The total number of distinct layers that are stacked within a single pallet. It represents how many separate horizontal levels of goods or packaging are arranged from bottom to top, allowing users to assess stacking density and storage capacity.

The physical dimensions of a camera’s image sensor, typically expressed as two measurements (width × height) with units in millimeters and inches. This attribute indicates the size of the sensor that captures light for each frame, influencing resolution, depth‑of‑field, and low‑light performance.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The number of pages a printer or printing device can produce before the ink, toner, or other consumable needs replacement under normal operating conditions.

The vertical dimension of a pallet measured from its lowest to highest point, expressed in a physical unit such as millimetres, centimetres or inches. It indicates the height of the pallet itself and is useful for determining storage capacity, shipping logistics and compatibility with shelving or handling equipment.

The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.

The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.

Indicates whether the product requires a Personal Identification Number (PIN) to access sensitive functions or the device itself, providing an additional layer of security against unauthorized use.

A list of the positions or mounting options where a product can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

Represents the number of individual items or units that can be placed on a single pallet. This value indicates how many pieces, packages, or components are stored or shipped together on one pallet, helping users assess storage capacity and logistics planning.

The electrical current that a device is designed to draw or supply under normal operating conditions, expressed in amperes (A). It indicates the typical power consumption or output capability of the product and helps users assess compatibility with power supplies, sockets, or other components.

Indicates whether the device has a physical reset button that restores factory settings or original configuration when pressed.

The speed at which a rotating component—such as a motor shaft, fan blade, or hard‑drive spindle—turns, expressed in revolutions per minute (RPM) or another appropriate unit of angular velocity. This value indicates how fast the component operates and is useful for comparing performance or suitability across different models.

Indicates whether the product comes with the necessary screws included in the package. A value of "Yes" means that screws are supplied, allowing the user to assemble or secure the item immediately after unpacking; a value of "No" means no screws are provided and must be purchased separately.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates the types of products, users or environments for which the item is intended or compatible. The value can be a single category such as "Gaming" or a specific product type like "Computer case".

The pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.

A list of video compression codecs that the product can encode or decode, such as H.264, H.265, VP9, M-JPEG, and others. Each value represents a codec that is natively supported by the device’s hardware or software.

Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.