ASUS 2011-V3 X99-E Ws Workstation

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

Indicates whether a computer chassis includes a dedicated intrusion connector, which allows the attachment of security or monitoring devices to detect unauthorized access. A value of "Yes" means the connector is present; "No" means it is absent.

Indicates whether the product includes a clear‑CMOS jumper—a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product includes a dedicated graphics processor separate from the integrated GPU, allowing higher performance for rendering and gaming tasks.

Indicates whether the product includes an EPS (Extended Power Supply) connector, typically used to provide additional power to high‑performance components such as GPUs or server CPUs.

Represents how many eSATA connectors are physically present on the product, regardless of orientation or version. The value is a simple integer indicating the total count of eSATA ports available for connecting external storage devices.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

List of the physical interface(s) used by a hard drive together with the number of bays it occupies, such as "2 x SATA (2 x Bay)" or "1 x M.2 PCIe". This attribute helps users determine both the connection type and how many drives can be installed in an enclosure or system.

Represents how many separate headphone output ports a product provides, such as the number of 3.5 mm jacks or other audio connectors available for headphones or earphones.

The specific model identifier of an Intel Xeon processor, such as E5‑2600 or E3‑1200. This value allows users to determine compatibility with motherboards, operating systems, and other hardware components.

Indicates whether the product includes an IPMI (Intelligent Platform Management Interface) LAN port that uses a standard RJ‑45 connector. A positive value means the device supports remote management over Ethernet via this interface, while a negative value indicates it does not.

The minimum feature size that can be etched onto a semiconductor chip, expressed in nanometers (nm). It indicates the manufacturing technology generation and influences performance, power consumption, and integration density of the processor or GPU.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

A list of GPU multi‑processing technologies that the product can support, such as CrossFireX, SLI, NVLink or combinations thereof. Each value represents a distinct configuration that allows multiple graphics cards to work together for improved performance.

The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of the memory module types that a device can accept or support, such as DDR4 SDRAM, LPDDR3, or other RAM technologies. Each entry represents a distinct memory architecture or generation compatible with the product.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.