Asus Prime B360M-D Micro ATX LGA 1151v2

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether the product includes a connector on its front panel. The value can be "Yes" or "No", representing the presence or absence of this port.

Indicates whether a device supports HDCP (High‑bandwidth Digital Content Protection), allowing it to play or display protected digital content on compatible screens and audio/video equipment.

The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.

The specific model or designation of the LAN (network) controller integrated into a device, such as "Intel I219-V" or "Realtek RTL8111H." This value identifies the exact network interface hardware used for Ethernet connectivity, enabling users to compare performance, compatibility, and support across products.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The amount of dedicated video memory available on a graphics adapter or GPU, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the GPU can store for textures, frame buffers and other rendering tasks, affecting performance in gaming, 3D applications and high‑resolution displays.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The chipset family identifies the group of integrated circuits that manage communication between a computer’s CPU, memory, and peripheral devices on a motherboard. It indicates the supported processor families, available I/O interfaces, and overall system capabilities, helping users assess compatibility and feature sets for motherboards or other hardware components.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The total count of hard disk drives that the product can accommodate or support. It indicates how many separate HDD units are physically installable or usable within the device, regardless of size, interface type, or capacity.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate DIMM sticks can be installed or upgraded, regardless of size or speed.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of the memory module types that a device can accept or support, such as DDR4 SDRAM, LPDDR3, or other RAM technologies. Each entry represents a distinct memory architecture or generation compatible with the product.

A list of the types of storage drives that a product can accommodate or use, such as HDD, SSD, or hybrid configurations. Each entry indicates a distinct drive type that is supported by the device’s bays, slots, or external interfaces.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.