Black USB-C to Gigabit LAN Adapter

Indicates the configuration of an acoustic system, such as closed, open, semi‑open or semi‑closed. The value describes how sound is managed within the device and helps users understand its acoustic characteristics.

Indicates whether the product allows the user to adjust its viewing or orientation angle. A value of "Yes" means the device can be tilted, rotated, or otherwise repositioned to change its angle; a value of "No" means it is fixed.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

The count of individual electrochemical cells that make up a battery pack. This number indicates how many separate cells are connected in series or parallel to provide the required voltage and capacity for the device.

Indicates whether the product can be powered by a battery, allowing it to function without an external power source.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The chemical composition or classification of a battery, such as alkaline, lithium‑ion, NiMH, or lead‑acid. It indicates the energy storage technology used in the product and helps users identify compatibility with devices that require specific battery chemistries.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

Indicates whether the product contains a battery that is permanently integrated into its design and cannot be removed or replaced by the user. A value of "Yes" means the device has such an internal battery; "No" means it does not.

Indicates whether the product includes built‑in speaker(s) that can produce sound without requiring external audio devices. A value of "Yes" means the device has one or more integrated speakers; a value of "No" means it does not.

The electrical voltage supplied to the device through its bus or power connector, expressed in volts (V). This value indicates the nominal operating voltage required by the product and can be used to verify compatibility with power supplies, adapters, or mains outlets.

Indicates whether the device receives its power supply through a bus connection such as USB, eSATA, or another standard interface. A value of "Yes" means the product can be powered directly from the bus port, while "No" indicates it requires an external power source.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The form or style of a protective enclosure for electronic devices, such as laptops, tablets, phones, or other gadgets. It indicates whether the case is a hard shell, soft sleeve, backpack, messenger bag, folio, flip cover, or any other design that protects and carries the device.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The mechanism used to secure a product’s opening or cover, such as zippers, magnetic closures, buckles, straps, snaps, Velcro, or other fastening methods.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

Indicates the gender or sex classification of a connector, such as Male, Female, or Unspecified. This attribute helps users identify whether a cable or port is designed for insertion (Male) or reception (Female).

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The total duration a device can play audio continuously without interruption, expressed in standard time units such as minutes or hours. This value indicates the maximum autonomous listening period available on a single charge or power source.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product includes a detachable cable that can be removed or replaced independently of the main device. A value of "Yes" means a detachable cable is supplied, while "No" indicates it is not included.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

The physical dimension of the driver’s diaphragm or cone in a speaker or headphone. It is expressed as a linear measurement (e.g., millimetres, centimetres, inches) and allows users to compare the relative size of drivers across different products.

The type of ear attachment used by a headset or earphones, indicating how the device fits around or inside the ear. Common values include "Intraaural", "Circumaural", "Supraaural" and "On‑ear". This attribute helps users choose a model that matches their preferred fit and comfort.

Indicates whether the product comes with an external power adapter in its packaging. A value of "Yes" means a charger is supplied; a value of "No" means no charger is included and the user must obtain one separately.

Indicates whether the product supports fast charging, allowing a battery to be charged at a higher rate than standard charging methods.

A list of file system formats that the product can read or write, such as NTFS, FAT32, exFAT, HFS+, and others. Each value represents a distinct format supported by the device’s storage controller.

Indicates whether the product can be folded or collapsed for easier storage or transport. A value of "Yes" means the item is designed to fold, while "No" indicates it remains rigid.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

The hardness rating indicates how resistant a material or component is to indentation, scratching, or deformation. It is commonly expressed on the Shore scale using letters and numbers such as "9H", "HB", or "5 (Shore A)", but may also appear as numeric values like "82" for other scales. The rating helps users compare durability and suitability across similar products.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.

The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.

The span of audio frequencies that a product can accurately reproduce or respond to, expressed in hertz (Hz). It indicates the lowest and highest frequencies the device can handle, helping users assess suitability for music playback, communication, or signal processing applications.

The sensitivity of a headphone expressed in decibels (dB), indicating how much sound pressure the headphones can produce or detect for a given electrical input level. Values may be positive, negative, or zero and are typically measured at 1 kHz. This attribute helps users compare the loudness performance of different headphones.

The general classification of a headset based on how it delivers audio to the user, such as binaural (two‑channel), monaural (single‑channel), or other configurations. This attribute helps buyers understand whether the device provides stereo sound, single‑speaker output, or specialized listening modes.

Indicates whether a product has illumination or lighting capability. The value is "Yes" if the product includes any form of light source (LED, back‑lit display, built‑in lamp, etc.) and "No" otherwise.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

Indicates whether the product is designed to block or reduce electromagnetic interference, ensuring stable operation and compliance with regulatory standards.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The total mass of a product’s outer enclosure, expressed in a standard unit such as grams or kilograms. It represents how heavy the case is and can be used for shipping calculations, handling instructions, or consumer information.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The material indicates the type of substance from which a product is made, such as metal, plastic, wood, glass, or composite materials. It helps users understand the product’s durability, weight, appearance, and suitability for specific applications.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

The tallest height a user can comfortably reach or stand at while using the product, expressed in a physical unit such as millimetres, centimetres or inches. It indicates the maximum vertical dimension that should be considered for ergonomics, accessibility or equipment compatibility.

The span of audible frequencies that a microphone can accurately capture, expressed as a minimum and maximum value in hertz (Hz). It indicates the lowest and highest tones the device can reproduce or record, helping users assess suitability for different audio applications.

Indicates whether the product includes a functional mute button or control that allows the user to silence the microphone during operation. A value of "Yes" means a dedicated mute feature is present, while "No" indicates it is absent.

The acoustic sensitivity of a microphone, expressed in decibels (dB). It indicates how effectively the microphone converts sound pressure into an electrical signal; lower (more negative) values mean higher sensitivity and better performance at low sound levels.

The classification of a microphone’s design or pickup pattern, such as condenser, dynamic, lavalier, boom, built‑in, handheld or other types. It indicates the physical form and typical usage scenario of the microphone.

A list of mobile operating systems that the product supports, including specific versions and architectures when relevant. Each value represents a distinct OS that is compatible with the device.

Indicates whether the product includes a feature that reduces or eliminates unwanted ambient noise, such as active noise cancellation or built‑in sound‑absorbing technology.

A unique alphanumeric identifier assigned by the original equipment manufacturer that distinguishes a specific product model or variant. It is used for cataloging, inventory management, and support purposes.

A list of functional controls or button combinations that can be used on a device, such as volume adjustment, mute, play/pause, call handling, and Bluetooth pairing. Each entry represents an individual key action or a multi‑key sequence that the user can trigger.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

Indicates whether a product includes a pouch or protective case as part of its standard packaging or accessories.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

The type of material used to produce a printed object, such as PLA, ABS, PETG, resin or other thermoplastic or photopolymer substances. It indicates the physical composition that determines properties like strength, flexibility, color options and suitability for specific printing technologies.

A visual attribute that describes the dominant hue or combination of hues present on a product. It can be a single colour such as "Black" or a comma‑separated set like "Black, Grey" to indicate multiple prominent colours used in the item’s design.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

Represents the number of individual items or units that are packaged together in a single box. This value indicates how many pieces, components, or consumables are included in each boxed unit sold or shipped.

The count of individual product units contained within a single master outer case or packaging unit. This value indicates how many pieces are shipped together in one outer carton, helping buyers assess inventory, shipping costs and storage requirements.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product comes with a wireless receiver included in its package. A value of "Yes" means a receiver is supplied, while "No" indicates that no receiver is provided and must be purchased separately.

A brief statement of the intended or most suitable use cases for a product, such as the type of environment (indoor, outdoor), activity (gaming, office work, music listening) or general application category. It helps customers quickly determine whether the item fits their needs.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

Indicates whether the product supports Intel Smart Response Technology (or equivalent), a feature that uses flash memory as a cache to accelerate disk access and improve overall system performance.

Indicates whether the product includes a built‑in stand or support for an external stand, allowing it to be positioned upright without additional accessories.

The maximum continuous duration a device can handle voice communication before needing recharge or power interruption, expressed in standard time units such as minutes or hours.

The measured distance between two opposite surfaces of a material or component, expressed in a linear unit such as millimeters or inches.

Indicates whether the product includes a Thunderbolt interface, which allows high‑speed data transfer and power delivery in a single cable.

Indicates whether the storage device supports the TRIM command, which allows an operating system to inform the drive which blocks of data are no longer considered in use and can be wiped internally. This feature improves performance and longevity on solid‑state drives by enabling efficient garbage collection.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

The highest theoretical speed at which a device can send or receive data over its USB interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and USB versions.

The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping, handling, or user information purposes.

Indica el mecanismo o método con que se opera la función de ajuste de volumen en un producto, como botones físicos, controles giratorios, táctiles, digitales o combinaciones de estos. Los valores comunes incluyen "Tocar", "Botones", "Giratorio", "Control en línea" y otras variantes similares.

A textual description of the way a product is worn or fitted on the body, such as "headband", "earhook", "neck‑band", "over‑the‑ear", or "in‑ear". This attribute helps users understand how the item will be positioned and secured during use.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.