Bosch PCP6A5B90 60cm Gas Hob

The type of fuel or gas that can be used with the appliance, such as LPG, GPL, or specific liquid gas mixtures identified by pressure ranges (e.g., "Liquid gas G30,31 28-30/37mbar"). This attribute indicates which gases are compatible and helps users select the correct fuel for their device.

The total count of individual burner elements on a cooking appliance such as a hob, range or cooker. It indicates how many separate heating zones are available for simultaneous use.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

A colour is a visual attribute that describes the hue or shade of an object or surface. It can be a single dominant colour, a combination of colours, or a range such as "Black, White". The value may be expressed in common names (e.g., Black, Silver) or descriptive terms (e.g., One Colour, Assorted).

The linear measurement of the depth required for a cut‑out or opening in a product, expressed in a physical unit such as millimetres, centimetres, inches, etc. It indicates how deep the cut must be to accommodate components, fittings or installation requirements.

The horizontal measurement of the cut‑out area in a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the opening is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The electrical current rating of a fuse, expressed in amperes (A). It indicates the maximum continuous current that the fuse can safely carry before it blows, protecting electrical circuits from overload. The value is typically a whole number such as 3 A or 32 A, but may also appear without the unit symbol. This attribute helps users select the correct fuse for a device or installation.

Indicates the type of safety mechanism incorporated into a gas appliance, such as an electromagnetic ignition system or a flame‑safety device that prevents accidental fires. The value is a free‑text label describing the specific safety feature used in the product.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates the physical location where a product’s control interface is situated, such as front, side, top, or rear. This attribute helps users identify where to interact with the device and compare products based on accessibility.

The material or finish of the pan support that sits on a stove or hob, such as cast iron, enamelled, steel, or specialized finishes. It indicates what kind of surface the cookware rests on and can affect heat distribution, durability, and compatibility with different cooking surfaces.

The electrical plug configuration that the product uses for connection to a power source, such as UK G, EU Schuko, NEMA 5‑15P, or no plug. It indicates whether the appliance can be directly plugged into a standard outlet or requires a special adapter or wiring.

The mechanism or method used to operate a product, such as buttons, knobs, touch panels, rotary dials, switches, sensors, or combinations of these. It indicates how the user interacts with the device and what controls are available for operation.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.