Buffalo MiniStation 3TB USB 3.0 SSD

Indicates whether the product includes backup software that is pre‑installed or bundled with it, such as utilities for creating backups, restoring data, or managing backup schedules.

The electrical voltage supplied to the device through its bus or power connector, expressed in volts (V). This value indicates the nominal operating voltage required by the product and can be used to verify compatibility with power supplies, adapters, or mains outlets.

Indicates whether the device receives its power supply through a bus connection such as USB, eSATA, or another standard interface. A value of "Yes" means the product can be powered directly from the bus port, while "No" indicates it requires an external power source.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

Indicates whether the product includes an E‑SATA interface for external storage devices. A value of "Yes" means the device has a dedicated E‑SATA port, while "No" indicates it does not.

The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.

Indicates whether the product has any FireWire (IEEE 1394) ports available for connecting compatible devices, specifically at the 400 Mbps speed.

Indicates whether the product has any FireWire (IEEE 1394) ports available for connecting compatible devices.

The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

Indicates whether the product can connect to a network, either wired or wireless, and is capable of transmitting and receiving data over that connection.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

Indicates whether a device requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

The total count of RJ45 Ethernet connectors available on the product. A value of "No" indicates that the device has no RJ45 port, while numeric values represent the number of ports present.

The total amount of data that can be stored on a solid‑state drive (SSD) installed in the product, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the device can hold and helps users compare storage options across products.

The total count of Thunderbolt interfaces available on the product, indicating how many separate Thunderbolt connections it supports.

Indicates whether the product includes a Thunderbolt interface, which allows high‑speed data transfer and power delivery in a single cable.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product is compatible with both USB 2.0 and USB 3.0 interfaces, allowing it to connect to devices that use either standard.

Represents the count of available USB 3.0 ports on a product. The value is an integer indicating how many individual USB 3.0 connectors are present, regardless of their orientation or function (e.g., charging, data transfer). This attribute helps users compare connectivity options across devices.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

Represents how many USB connectors are available on the product. The value is a simple integer indicating the total count of USB ports, regardless of type or version.

A list of the USB interface versions that a product supports, such as USB 2.0, USB 3.0, USB 3.1, USB 3.2 or combinations like "USB 2.0 & USB 3.0". The values indicate which USB standards are available for connecting peripherals and external devices.

The generation and version of the USB standard supported by a product, expressed as a numeric revision followed optionally by descriptive suffixes such as "Gen 1" or "Gen 2". This attribute indicates the maximum data transfer rate and compatibility with USB devices.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

Indicates whether the product supports wireless networking and, if so, which Wi‑Fi standards are available (e.g., 802.11b/g/n/ac/ax). The value is a free‑text description of the supported protocols and any additional features such as dual‑band or hotspot mode.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.