Canon Pixma MG3051 Wireless All-in-One Printer

The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.

The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.

A list of software programs and utilities that come pre-installed or bundled with the product, such as operating systems, drivers, antivirus suites, or other essential applications.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

Indicates whether the device can perform copy functions and the type of copying it supports (e.g., colour or monochrome). The value is a free‑text label that describes the copying feature available on the product.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product can transmit digital signals or data, such as through a digital output interface. The value is "Yes" if the device supports digital sending and "No" otherwise.

Indicates whether the device can automatically copy on both sides of a sheet in a single pass. A value of "Yes" means duplex copying is supported; a value of "No" indicates it only copies one side at a time.

Indicates whether the device can automatically print on both sides of a sheet in a single pass. A value of "Yes" means duplex printing is supported; a value of "No" indicates that only single‑sided printing is available.

Indicates whether a device can scan both sides of a sheet in a single pass. A value of "Yes" means the scanner automatically captures the front and back of each page, while "No" indicates that only one side can be scanned at a time.

A list of envelope sizes that a product can accept, expressed with standard codes or names (e.g., "DL", "C5", "10"), optionally combined in comma‑separated groups to indicate compatible envelopes.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The number of distinct colours that a device can capture or process from an input source, expressed as an integer value such as "48 bit" or "24 bit". This metric indicates the richness and fidelity of colour reproduction for scanned images or captured media.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The total count of individual copies that a product can produce, print, or otherwise deliver in a single operation or session. It represents the maximum number of identical units that the device is capable of handling at once, such as the number of pages a printer can copy before needing to pause or reload. The value is an integer and may be accompanied by the word "copies" for clarity.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height in pixels or physical units such as millimeters or inches. This value indicates the maximum size of material that can be processed without trimming.

The smallest amount of internal or built‑in storage that a product requires to operate, typically expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand the minimum space needed for the operating system, essential applications, and basic usage.

A comma‑separated list of mobile printing services or protocols that a device can use to send print jobs from smartphones, tablets or other mobile devices. Typical values include Apple AirPrint, Google Cloud Print, Mopria Print Service and similar cloud‑based solutions.

The sound intensity produced by a product, expressed in decibels (dB) or sones. It indicates how loud the device is during operation and helps users assess suitability for quiet environments.

The total count of individual cartridge units included in the product package or supplied with the device. It represents how many separate cartridges—such as ink, toner, filter, or other consumable cartridges—are available for use or replacement.

The pixel dimensions of a scanner’s optical sensor, expressed as width by height (e.g., 1200×2400). It indicates how many pixels can be captured per scan and determines the sharpness and detail of scanned images.

The number of distinct colours that a device’s output can represent, expressed as an integer followed by the unit "bit" (e.g., 24 bit). This metric indicates the richness and fidelity of colour reproduction for images or video sent to the device.

The type of paper input mechanism available in a printer or copier, such as a standard tray, cassette, sheet‑fed feeder, manual feed, or roll. It indicates how the device accepts and feeds paper for printing, scanning or copying.

A list of the paper or media types that a printer’s input trays can accept, such as envelopes, labels, plain paper, recycled paper, and transparencies. The values are free‑text strings separated by commas, allowing users to see which materials are compatible with the device.

A list of the dimensions and names of photo‑paper formats that a device can print on, such as "10x15 cm", "4x6", or custom sizes expressed in millimetres or inches. Each value represents a distinct paper size that the printer is capable of handling for photographic output.

Indicates whether the product can send images directly to a printer that supports the PictBridge standard without requiring an intermediate computer.

The type of printing process or technology used by the product, such as laser, inkjet, thermal, LED, or other specialized methods.

Indicates whether the printer can produce colour output or is limited to monochrome (black‑and‑white) printing. Typical values are "Colour printing" for devices that support full colour, "Mono printing" for black‑only devices, and "No" when colour capability is not available.

A list of destinations or methods to which a device can send scanned documents, such as email, FTP, cloud services, USB storage, or local PC. Each option represents a supported transfer protocol or target location for the scanned output.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

Indicates whether the product can perform scanning operations and what type of scans it supports (e.g., color or monochrome). The value is a free‑text label that may include terms such as "Color scanning", "Mono scanning" or simply "Yes/No" to denote availability.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

The maximum amount of material that can be fed into the device in a single operation, expressed as a numeric value followed by an appropriate unit such as sheets, pages or volume.

Represents the count of external USB 2.0 (high‑speed) connectors available on a device. The value is an integer indicating how many USB 2.0 ports can be used for data transfer or power delivery from the outside of the product, regardless of internal placement or version.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.