Dell Latitude 15 3590 with Flash Hard Drive

Indicates whether the product can run software or operating systems that require a 64‑bit architecture.

The operating frequency of the alternating current supplied to an AC adapter, expressed in hertz (Hz). It indicates the mains frequency range that the charger can handle and ensures proper operation with the connected device.

Indicates whether the product comes with an AC power adapter included in the package. A value of "Yes" means a charger is supplied, while "No" indicates that no charger is provided and the user must obtain one separately.

The range of alternating current voltage that an AC adapter can accept, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the device, ensuring safe operation across different regions and power standards.

The electrical current supplied by an AC power adapter to a device, expressed in amperes (A). It indicates the maximum output current that the adapter can provide under normal operating conditions and helps users verify compatibility with devices or accessories that require a specific input current.

The electrical potential difference supplied by the AC adapter to a device, expressed in volts (V). It indicates the nominal voltage that the charger outputs and is used to match the adapter with compatible equipment.

The proportion between the width and height of a display, image or video, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

A free‑text description of the speaker system installed in the product, including the number of speakers and their individual power ratings (e.g., "2 x 2W speakers", "3 x 5W speakers"). The value may combine quantity, wattage, and optional descriptors such as "built‑in" or "external".

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to a battery or measured across its terminals, expressed in volts (V). It indicates the nominal operating voltage of the battery and is used to match power sources, chargers, and devices that require a specific voltage level.

The specific version of the Bluetooth standard supported by the product, indicating its capabilities for wireless communication and compatibility with other devices. Values may be numeric (e.g., 4.2, 5.0) or include additional descriptors such as "+HS" or feature lists.

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.

The specific type of cable lock interface that a device provides for securing cables, such as Kensington, Noble, IBM or other standard locking mechanisms.

The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.

The pixel dimensions or video quality that a camera can capture, expressed as a resolution such as 720p, 1080p, or 1920x1080. It indicates the overall detail and clarity of images or videos produced by the device.

The total number of megapixels that a camera sensor can capture, expressed as a numeric value without units. This metric indicates the overall detail and clarity that the camera can record in still images or video frames, for both front‑facing and rear‑facing cameras.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The physical connector used to charge the device, such as USB Type‑C, DC‑in jack, Micro‑USB, or proprietary connectors. It indicates the type of port that supplies power to the product and helps users identify compatible chargers or accessories.

A colour is a visual attribute that describes the hue or shade of an object or surface. It can be a single dominant colour, a combination of colours, or a range such as "Black, White". The value may be expressed in common names (e.g., Black, Silver) or descriptive terms (e.g., One Colour, Assorted).

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

The operating frequency of a processor when the system reduces power consumption to improve energy efficiency, expressed in hertz (Hz). It indicates the minimum guaranteed clock speed that the CPU can run at during low‑power modes and helps users understand how the device balances performance with battery life or thermal limits.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product includes a dedicated graphics adapter (discrete GPU) separate from any integrated graphics. A value of "Yes" means a discrete GPU is present, while "No" indicates only integrated graphics are available.

The intensity of light emitted per unit area from a display surface, measured in candela per square meter (cd/m²). It indicates how bright the screen will appear under typical viewing conditions.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The visual appearance or texture of a product’s display surface, such as matte, glossy, or satin. It indicates how light reflects off the screen and can affect glare, visibility, and aesthetic preference for users.

Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

The count of physical expansion or memory slots that are currently unoccupied and available for installation on a device. It indicates how many separate modules can be added without removing existing components.

The specific model or designation of the Ethernet controller integrated into a device, such as "Intel I219-LM" or "Realtek RTL8111HSD". This value identifies the exact hardware component responsible for wired network connectivity and allows users to compare performance, compatibility, and support across products.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The physical configuration or shape of a product, such as clamshell, tower, rack‑mount, or compact form. It indicates how the device is built and what mounting or expansion options it supports.

Indicates whether the product is equipped with a front-facing camera. The value can be "Yes" or "No", representing the presence or absence of this camera.

The pixel count of the device’s front-facing camera expressed in megapixels (MP). It indicates how many pixels the camera can capture, affecting image and video quality.

The pixel dimensions of the front-facing camera, expressed as width by height (e.g., 1920x1080). It indicates how many pixels the camera can capture, affecting image and video quality.

Indicates whether the product includes a full‑size keyboard, meaning a standard layout with all keys (including space bar, return, and function keys) arranged in a conventional arrangement suitable for typing on a laptop or desktop. A value of "Yes" means the device has such a keyboard; "No" indicates it does not.

The minimum feature size that can be etched onto a semiconductor chip, expressed in nanometers (nm). It indicates the manufacturing technology generation and influences performance, power consumption, and integration density of the processor.

The name or model of the graphics processing unit (GPU) installed in a device, such as "GeForce GTX 1080" or "AMD Radeon RX 580". This value helps users understand the visual performance and capabilities that the product can deliver.

The pixel dimensions of a screen’s display expressed as width by height (e.g., 1920×1080). It indicates the number of pixels that can be shown on the monitor or device, affecting image sharpness and clarity.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The range of relative humidity (expressed as a percentage) within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 to 80%" and indicate the acceptable environmental moisture level for optimal performance.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

The technology or model of the image sensor used in a camera or imaging device, such as CMOS, CCD, or other proprietary types. This attribute indicates how light is captured and converted into digital data.

A list of items that come with the product as part of its standard package. Each entry describes a component or accessory such as cables, adapters, batteries, or manuals. The list helps customers understand what they will receive without needing to purchase additional accessories.

The range of electrical voltage that a device accepts from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

Indicates whether the product is compatible with Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Clear Video HD technology, a hardware feature that enhances video playback and capture quality by providing smoother motion, reduced artifacts, and improved color accuracy.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

Indicates whether a product includes a dedicated security lock slot, typically used for attaching a cable lock or similar locking mechanism to prevent unauthorized removal or theft.

The type of illumination used on a keyboard, such as single‑color LED, RGB, per‑key lighting or no backlight. It indicates whether the keys are illuminated and what kind of light source is employed.

The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness, energy efficiency and color accuracy of the screen.

The total amount of data that can be stored on the main internal storage component of a device, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the product can hold in its primary memory and helps users compare storage options across devices.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The total count of PCI Express lanes available on a device or component, indicating the maximum number of high‑speed data channels that can be used simultaneously for peripherals such as graphics cards, storage controllers, and networking adapters.

The highest clock frequency that a processor can reach when operating in turbo mode, expressed as a frequency value such as GHz or MHz. It indicates the peak performance capability of the CPU under load and is typically higher than its base frequency.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The physical configuration or size classification of a memory module, such as SO‑DIMM, UDIMM, RDIMM, or on‑board. It indicates the form factor that determines compatibility with motherboards and other hardware components.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

Number of spatial streams supported by a wireless device for MIMO technology, expressed as two integers separated by "x" (e.g., 4 x 4). The first number indicates maximum transmit streams and the second maximum receive streams.

The type of network interface that a device uses to connect to other devices or networks, such as Ethernet, Wi‑Fi, or other wired or wireless standards. It indicates the physical connector and protocol supported by the product.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

Indicates whether the product includes a numeric keypad area on its keyboard, typically found in full-size or laptop keyboards with an integrated numeric section.

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

The clock speed at which the integrated graphics processor runs under normal conditions, expressed in hertz (Hz). It indicates how many cycles per second the GPU performs and is useful for comparing visual performance across devices that use an on‑board graphics solution.

The version number of the DirectX graphics API supported by a device, indicating its compatibility with graphical features and software that rely on specific DirectX releases.

The family or series of the integrated graphics processor built into a device, such as Intel HD Graphics, Intel UHD Graphics, AMD Radeon Vega, ARM Mali, etc. It identifies the general GPU line that determines performance characteristics and compatibility with software.

The unique identifier of the integrated graphics adapter built into a device, typically expressed as a hexadecimal string such as "0x5916" or a numeric code like "1916". This value allows users and systems to distinguish between different GPU models and versions across laptops, desktops, and motherboards.

The specific version of the OpenGL graphics API supported by a device, indicating its rendering capabilities and compatibility with software that relies on this standard.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The operating system installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The architecture of the operating system installed on a device, indicating whether it is 32‑bit or 64‑bit (or other variants). This attribute helps users determine compatibility with hardware and software that requires a specific OS architecture.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

A list of natural languages in which the operating system installed on a device is available or supported, allowing users to identify the language options for the OS interface and documentation.

The type of optical drive included in a device, such as DVD‑RW, DVD‑Writer, Blu‑Ray RW, or no optical drive. This attribute indicates whether the product can read or write optical media and specifies the particular model or capability when available.

The electrical or functional output characteristics of a product, such as voltage, current, power, or throughput. It represents the quantity that the device delivers to its load or environment and is used to match accessories, assess performance, or compare models.

Indicates whether a device requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

The method or combination of methods used to secure a device or system with a password, such as requiring a password on boot, during user login, or for supervisor access. It indicates which security steps are enabled and can be listed separately.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

The number of pixels per inch on a display, expressed as points‑per‑inch (ppi). This metric indicates how sharp and detailed the screen appears, allowing comparison across monitors, smartphones, tablets, and other pixelated devices.

Represents the physical size of a single pixel on a display, expressed as width and height in a length unit (e.g., millimeters). This attribute allows comparison of the physical resolution of screens or imaging devices that use metric units to describe the smallest visible point.

The type of pointing device integrated into or used with the product, such as a touchpad, clickpad, trackpoint, or mouse. The value is a free‑text label that identifies the specific form factor or mechanism the user interacts with to move the cursor or select items.

Indicates whether a power cord is supplied with the product. A value of "Yes" means that a power cable is included in the package, while "No" indicates it is not provided and must be purchased separately.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

The type or level of the internal cache memory in a processor, such as L1, L2, L3, or Smart Cache. This attribute indicates the hierarchical structure and naming convention used by the CPU manufacturer to describe its cache organization.

The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

Indicates the general classification or type of an item, such as "laptop", "projector", "router" or "paint". It helps users quickly identify the nature of the product and compare similar items across categories.

A list of security-related features or technologies that a product supports, such as encryption methods, authentication mechanisms, physical locks, and network security protocols.

The type of security slot built into a device, such as Kensington or Noble Wedge, which allows the attachment of a lock for physical protection.

Specifies the audio channel configuration (e.g., Mono, Stereo, 5.1) together with the language of the sound track (e.g., English, Spanish). The value is a free‑text string that may combine multiple attributes separated by slashes or commas.

The brand or company that produces the speaker(s) included in a product. This value helps users identify the source of the audio hardware, assess quality expectations, and locate support resources.

The maximum speed at which a component or device operates, expressed in an appropriate unit such as revolutions per minute (RPM), hertz (Hz) for frequencies, or other velocity units. It indicates how fast the product can perform its primary function and allows users to compare performance across models.

List of physical or logical interfaces that a solid‑state drive can use to connect with other components, such as PCI Express (PCIe), Serial ATA (SATA), NVMe, U.2 or other standard connections.

The processor stepping code identifies the specific revision of a CPU model, indicating changes in manufacturing that may affect performance, power consumption or compatibility. It is used to distinguish between different silicon revisions within the same product line.

The type of storage medium used in the product, such as SSD, HDD, eMMC, Flash, or hybrid combinations. It indicates whether the device uses solid‑state, magnetic, or other forms of memory and helps users understand the underlying technology.

A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.

The maximum ambient temperature at which the product can safely operate without risk of damage or performance degradation.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product supports USB Power Delivery (USB‑PD) and, if applicable, the maximum power it can deliver via a USB‑C port. A value of "Yes" means the device is capable of providing or receiving power through USB‑PD; a numeric value specifies the wattage limit (e.g., 90 W).

Indicates whether the product supports the USB‑Type C DisplayPort Alternate Mode, allowing a USB‑C port to transmit video signals via the DisplayPort protocol.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

Indicates whether a display or screen supports the widescreen aspect ratio (typically 16:9). A value of "Yes" means the device is designed for widescreen content, while "No" indicates it does not support that format.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The total count of individual key switches present on a keyboard or similar input device, including all standard, function, and special keys. This value indicates how many separate keys are available for typing, gaming, shortcuts, or other functions, regardless of layout or branding.

A textual list of the wireless communication technologies that a product supports, such as Wi‑Fi standards (e.g., 802.11a/b/g/n/ac/ax) and Bluetooth versions. The value may include multiple protocols separated by commas or other delimiters.

The specific model or designation of the wireless controller hardware installed in a device, such as Intel Dual Band Wireless‑AC 8260 or Marvell 88W8897. This value identifies the exact wireless interface used for Wi‑Fi connectivity and allows users to compare performance, compatibility, and support across products.