Dell PERC H310 RAID Controller Full Height Adapter

A list of product names that are known to work with or be supported by this item, such as models, series, or specific configurations. Each entry represents a distinct product that can be used interchangeably or in conjunction with the current product.

Indicates whether the product can be connected or removed while it is powered on without requiring a shutdown or reboot. A value of "Yes" means the device supports hot‑plugging, allowing components such as drives, peripherals or expansion cards to be added or removed safely during operation; "No" indicates that the device must be powered down before any hardware changes.

The total count of individual devices that the product can accommodate or operate with simultaneously. This value indicates how many separate units—such as computers, peripherals, or other hardware components—can be connected to or managed by the product at once.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

Indicates whether a product includes an internal or external solid‑state drive (SSD) interface or component, allowing the device to use SSDs for storage. The value is typically "Yes" if the product supports SSDs and "No" otherwise.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

List of physical or logical interfaces that allow an internal storage drive to communicate with the system, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.