Dell PowerEdge T630 Tower Server (E5-2620V4, 2.1 GHz) with 8 MB Cache and 750 W Power Supply

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as a monitor on a laptop, an integrated display on a device, or a built‑in screen on appliances. A value of "Yes" means the product has such a display; "No" means it does not.

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The physical form factor of a computer chassis, indicating its size and layout such as Tower, Desktop, Mini‑PC, or rack units (e.g., 1U, 2U). This attribute helps users identify the footprint, mounting options, and compatibility with other hardware.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Der E‑Wert‑Code ist ein eindeutiger alphanumerischer Identifikator, der Dell-Produkten zugeordnet wird. Er dient zur Klassifizierung und zum schnellen Auffinden von Modellen innerhalb des Dell-Produktportfolios.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indica si el producto cuenta con la característica o función especificada. El valor puede ser "Sí" (disponible) o "No" (no disponible).

Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product has an Ethernet interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indica si la función de desactivar el bit de ejecución está habilitada en el dispositivo o componente. Un valor afirmativo significa que se permite bloquear la ejecución de código no autorizado, mientras que un valor negativo indica que esta protección no está activa.

The specific model or designation of the graphics adapter present in a device, such as "Intel HD Graphics", "AMD Radeon Vega 8", or "NVIDIA GeForce GTX 1660". This value helps users understand the visual performance and capabilities that the product can deliver.

The brand or family of the graphics adapter present in a device, such as Intel, AMD, NVIDIA, Apple, or other vendors. It indicates the general source of the GPU technology and helps users compare visual performance across products.

The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.

List of the physical interface(s) used by a hard drive together with the number of bays it occupies, such as "2 x SATA (2 x Bay)" or "1 x M.2 PCIe". This attribute helps users determine both the connection type and how many drives can be installed in an enclosure or system.

The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.

The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the product can be connected or removed while it is powered on without requiring a shutdown or reboot. A value of "Yes" means the device supports hot‑plugging, allowing components such as drives, peripherals or expansion cards to be added or removed safely during operation; "No" indicates that the device must be powered down before any hardware changes.

Indica si el producto puede ser retirado o insertado mientras está en funcionamiento sin necesidad de apagarlo o reiniciarlo.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

Indicates whether the product is compatible with Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Demand‑Based Switching technology, which dynamically adjusts power delivery to components based on workload demands, improving energy efficiency and performance.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates whether the product incorporates Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI), a hardware feature that enables efficient transaction processing and concurrency control in compatible processors.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The total count of PCI Express lanes available on a device or component, indicating the maximum number of high‑speed communication channels that can be used simultaneously for peripherals such as graphics cards, storage devices, and networking adapters.

The total count of symmetric multiprocessing (SMP) processors supported by a computer system or component. This value indicates how many CPU cores can operate concurrently in an SMP configuration, which is relevant for multi‑core performance and parallel processing capabilities.

The largest amount of digital storage that a product can hold or provide, expressed as a numeric value with an appropriate unit such as GB, MB, TB, or a descriptive label indicating the type of media (e.g., SSD, HDD). This attribute helps users understand how much data can be stored on the device and compare storage options across products.

The total number of independent memory channels that a processor or motherboard supports for installing RAM modules. Each channel can handle one or more memory sticks, allowing the system to access data in parallel and improving performance.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The set of operating frequencies that a processor can run at, expressed in hertz (Hz). Values are typically listed as individual frequencies or ranges separated by commas, indicating the base clock and any boost or turbo options available for the CPU.

The number of physical memory slots that are present and available for installing RAM modules in a device. This count indicates how many separate memory sticks can be installed or upgraded.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The total count of hard disk drives physically present in the device or system. It indicates how many separate storage units are installed and can be used for data storage, backup, or redundancy.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The type of optical drive included in a computer or related device, such as DVD‑RW, DVD‑Writer, Blu‑Ray RW, or no optical drive. This attribute indicates whether the product can read or write optical media and specifies the particular model or capability when available.

The version of the PCI Express specification supported by a device or component. It indicates the maximum bandwidth and compatibility with PCIe devices such as graphics cards, storage controllers, and expansion cards. The value is typically expressed as a numeric revision (e.g., 2.0, 3.0, 4.0) but may also include descriptive labels for specific generations.

A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.

The electrical power consumption or output of the product, expressed in watts (W). It indicates how much energy the device uses during operation or how much power it can deliver to connected equipment.

The frequency of the alternating current supplied to a device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.

The Processor ARK ID is a numeric identifier assigned by Intel to each processor model. It uniquely distinguishes one CPU from another and can be used to look up detailed specifications, compatibility information, or firmware updates for that specific chip.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

The type or level of the internal cache memory in a processor, such as L1, L2, L3, or Smart Cache. This attribute indicates the hierarchical structure and naming convention used by the CPU manufacturer to describe its cache organization.

A unique identifier that represents the specific model or variant of a computer processor. The code is typically an alphanumeric string (e.g., "SR2ZU", "SR3LA") used by manufacturers to distinguish between different CPU models, generations, and configurations. It can be entered as free text and may appear in product listings, technical specifications, or inventory records.

The total number of physical processing units in a single central processing unit (CPU). This value indicates how many independent tasks the CPU can handle simultaneously, influencing multitasking and parallel performance.

The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The set of instruction set architectures or execution modes that a processor can operate in, such as 32‑bit or 64‑bit. This attribute lists the supported modes for the CPU and helps users determine compatibility with software that requires a specific bitness.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The processor series identifies the family or generation of a CPU, such as "Intel Xeon E5-2600" or "AMD Ryzen 5000". It is used to group models that share similar architecture, performance characteristics and compatibility features.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.

Der CPU‑Stepping bezeichnet die interne Version eines Prozessormodells, die bei jeder neuen Fertigungsrunde geändert wird. Er gibt an, welche Revision des Chips verwendet wurde und kann Einfluss auf Leistung, Energieverbrauch oder Kompatibilität haben.

List of physical or logical interfaces that allow an internal storage drive to communicate with the system, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

The highest temperature at which the product can safely operate without risk of damage or performance degradation. It is expressed in degrees Celsius and applies to all electronic components such as processors, servers, storage devices, and other hardware that generate heat during normal use.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.