DWF60100XX Fixed TV Wall Mount

Identifiers
MPN	Tripp Lite DWF60100XX
Dimensions / Weight
Key Features
Displays Supported The maximum count of display units that a product can accommodate or operate simultaneously, such as monitors, TVs, or other visual output devices. This value indicates how many separate displays the system is designed to support in its current configuration.	1
Distance to the wall The linear measurement from a product’s mounting surface to the nearest wall or vertical support, expressed in a physical unit such as centimeters or inches. It indicates how far the device can be positioned away from the wall while still maintaining proper clearance and stability.	1.37 cm
Harmonized System HS code The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.	8302.50.0000
Master (outer) case gross weight The total mass of a product’s outer enclosure, expressed in a standard unit such as grams or kilograms. It represents how heavy the case is and can be used for shipping calculations, handling instructions, or consumer information.	18.7 kg
Master (outer) case GTIN (EAN/UPC) The Global Trade Item Number (GTIN) for the master outer packaging of a product, typically expressed as an EAN or UPC code. It uniquely identifies the packaged unit and is used for inventory, logistics, and sales tracking across supply chains.	10037332186673
Master outer case height The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.	43 cm
Master outer case length The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.	113 cm
Master outer case width The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	14 cm
Maximum VESA mount The largest VESA mounting pattern that a product supports, expressed as two horizontal and vertical dimensions in millimetres (for example, "100 × 100 mm"). This value indicates the exact hole spacing required for a compatible wall or desk mount.	900x600
Minimum screen size The diagonal measurement of the smallest display screen that a product can accommodate, expressed in units such as inches or centimeters. It indicates the minimum visual area required for the device’s enclosure or mounting system and helps customers ensure compatibility with their intended setup.	152.4 cm (60")
Panel mounting interface The pair of horizontal and vertical dimensions in millimetres that a product supports for VESA mounting (e.g., "100 × 100 mm"). This value indicates the exact hole spacing required by a mounting bracket to secure the device. It is used for monitors, TVs, projectors and other display equipment that can be wall‑mounted or attached to stands.	200x2003
Products per master (outer) case	3 pc(s)

Tripp Lite is a manufacturer of power protection and connectivity products. The company offers a wide range of products, including surge protectors, uninterruptible power supplies (UPS), power distribution units (PDUs), and rack enclosures. Tripp Lite's products are used by businesses and consumers to protect their electronic equipment from power surges, blackouts, and other electrical problems.