EPSON WorkForce DS-70000N - Document scanner - Duplex - A3 - 600 dpi x 600 dpi - up to 70 ppm

The maximum number of black‑and‑white pages a scanner can process per minute when using its automatic document feeder (ADF) with A4 paper. This value indicates the speed at which documents are scanned and is useful for comparing throughput across models.

The mass of the paper or other media that a device can handle, expressed as grams per square metre (g/m²). This attribute indicates how heavy the material is for each unit area and helps users understand the suitability of different media types for scanning or printing.

Indicates whether the device is equipped with an automatic document feeder that can load and feed multiple pages automatically for scanning, copying or faxing. A value of "Yes" means the feature is available; "No" means it is not present.

A list of formal recognitions, compliance marks, or standards that a product meets. Each entry may be a single certification (e.g., "RoHS") or a group of related certifications separated by commas (e.g., "CE, FCC, RoHS"). The attribute captures all applicable regulatory, environmental, safety, and quality approvals for the item.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The maximum number of pages a scanner can process in a single day under normal operating conditions. It indicates the device’s capacity for continuous use and helps users gauge how many documents it can handle before requiring maintenance or downtime.

A list of software driver types that the product supports or includes, such as TWAIN, WIA, ISIS, or other platform‑specific driver interfaces. Each entry indicates a distinct driver protocol that can be used to communicate with the device or software.

La velocidad de escaneo duplex indica cuántas páginas en modo blanco y negro puede procesar el escáner por minuto cuando se utiliza la función de doble cara con alimentador automático de documentos (ADF) en formato A4. Este valor permite comparar la rapidez del dispositivo al digitalizar documentos de tamaño estándar.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

The electrical power drawn by a device while it is in standby mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum mains supply voltages compatible with the device across different regions.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The number of distinct colours that a device can capture or process from an input source, expressed as an integer value such as "48 bit" or "24 bit". This metric indicates the richness and fidelity of colour reproduction for scanned images or captured media.

The largest standard ISO B-series paper format that a device can handle, expressed as an ISO code (e.g., "B0", "B1", …, "B5"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The main illumination source used by the product, such as LED, laser, CCFL, or other light-emitting technologies. It indicates whether the device uses a single light source or multiple sources and helps users understand the lighting characteristics of the item.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height (e.g., 216 × 356 mm). This value indicates the maximum area the device can scan without needing to cut or stitch images.

The maximum data transfer rate supported by the network interface card, expressed in bits per second or a commonly used abbreviation such as Gigabit or Megabit. This value indicates how fast the device can send and receive data over a wired connection.

The maximum data transfer rate supported by the network interface card, expressed in bits per second or common abbreviations such as Gbps or Mbps. This value indicates how fast the device can send and receive data over a wired connection.

A list of the physical network connectors present on the device, such as RJ‑45 Ethernet ports or other wired interfaces. Each entry describes a port type and its capabilities (e.g., speed, duplex mode). The attribute captures all available network connection points that can be used for data transmission.

Indicates whether the product can connect to a network, either wired or wireless, and is capable of transmitting and receiving data over that connection.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The pixel dimensions of a scanner’s optical sensor, expressed as width by height (e.g., 1200×2400). It indicates how many pixels can be captured per scan and determines the sharpness and detail of scanned images.

The electrical power drawn by a device while it is in powersave mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The type of electrical supply used by the product, such as AC mains, DC power, USB power, battery, or a combination of these options.

A list of communication interfaces or software protocols that a scanner can use to transfer scanned images to a computer or network, such as TWAIN, WIA, SANE, ICA, ISIS, and others. Each entry represents an available option for connecting the device to capture software.

A list of file extensions that a scanner can produce or accept when digitizing documents, such as JPG, PDF, TIFF, BMP, PNG, RTF, CSV, HTML, OCR, XPS, TXT and XLS. The values are comma‑separated strings representing each supported format.

A list of destinations or methods to which a device can send scanned documents, such as email, FTP, cloud services, USB storage, or local PC. Each option represents a supported transfer protocol or target location for the scanned output.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

A list of operating systems that the server product can run or support, including specific versions and architectures when relevant. Each value represents a distinct OS compatible with the hardware.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

Represents how many USB connectors are available on the product. The value is a simple integer indicating the total count of USB ports, regardless of type or version.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.