Fellowes 12 mm Binding Combs Pack of 100

Indicates whether a product includes a standard 3.5 mm audio connector, the common analog jack used for headphones, microphones and other audio devices.

Indicates whether the product has built‑in support for 3‑dimensional (3D) content or displays. A value of "Yes" means the device can render or display 3D images, videos, or games; a value of "No" means it does not have native 3D capability.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates the configuration of an acoustic system, such as closed, open, semi‑open or semi‑closed. The value describes how sound is managed within the device and helps users understand its acoustic characteristics.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness uniformity, power consumption and color performance of the screen.

Indicates whether the product can be powered by a battery, allowing it to function without an external power source.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

The category or technology of a cable, such as Cat5e, Cat6, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The primary way a product is carried or supported, such as by hand, shoulder strap, backpack, belt, or other carrying mechanisms. This attribute helps users understand how the item can be transported and what accessories are required.

The form or style of a protective enclosure for electronic devices, such as laptops, tablets, phones, or other gadgets. It indicates whether the case is a hard shell, soft sleeve, backpack, messenger bag, folio, flip cover, or any other design that protects and carries the device.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The type of source that supplies power to the device for charging, such as a mains adapter (AC), a USB port, a solar panel, or a battery pack. It indicates which external supply can be used to charge the product and helps users determine compatibility with their available chargers.

Indicates whether the cleaning cloth can be washed or not. A value of "Yes" means the cloth is machine‑washable or hand‑washable, while "No" indicates it should not be washed and may require dry cleaning or special care.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The physical position of a connector on a product, such as top left, bottom right, front panel, rear panel or internal mounting point. It indicates where the interface is situated relative to the device’s exterior or interior layout, helping users identify installation points and compatibility with cables or accessories.

The physical interface or port used to connect a device to another component or system, such as USB, HDMI, RJ‑45, 3.5 mm jack, or fiber optic connectors. It indicates the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The electrical current drawn by a device when powered, expressed in milliamperes (mA). It indicates how much current the product consumes from its power source during normal operation and can be used to assess compatibility with power supplies, USB ports, or adapters.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The general classification of a product, such as tablet, smartphone, router, or computer. It indicates the primary function or form factor that helps buyers quickly identify and compare similar items.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

The classification of the audio driver used in a product, such as Dynamic, Neodymium, Hybrid, or Balanced. It indicates the technology that shapes sound reproduction and can influence tonal quality, sensitivity, and power handling.

The physical dimension of the driver’s diaphragm or cone in a speaker or headphone. It is expressed as a linear measurement (e.g., millimetres, centimetres, inches) and allows users to compare the relative size of drivers across different products.

The type of ear attachment used by a headset or earphones, indicating how the device fits around or inside the ear. Common values include "Intraaural", "Circumaural", "Supraaural" and "On‑ear". This attribute helps users choose a model that matches their preferred fit and comfort.

Indicates whether the product can be applied easily, typically without special tools or adhesives and with minimal effort. A value of "Yes" means the item is designed for quick, straightforward installation; a value of "No" indicates it requires more complex handling.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The exterior pockets are the storage compartments located on the outside of a product, such as a backpack or bag. They provide convenient access to items like wallets, phones, keys or small accessories and can be single or multiple in number. The attribute captures the names or types of these pockets (e.g., "Front pocket", "Side pocket", "Back pocket").

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

Indicates whether the product includes a front pocket. The value can be "Yes" or "No", representing the presence or absence of this feature.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

The span of audio frequencies that a product can accurately reproduce or respond to, expressed in hertz (Hz). It indicates the lowest and highest frequencies the device can handle, helping users assess suitability for music playback, communication, or signal processing applications.

The sensitivity of a headphone expressed in decibels (dB), indicating how much sound pressure the headphones can produce or detect for a given electrical input level. Values may be positive, negative, or zero and are typically measured at 1 kHz. This attribute helps users compare the loudness performance of different headphones.

The general classification of a headset based on how it delivers audio to the user, such as binaural (two‑channel), monaural (single‑channel), or other configurations. This attribute helps buyers understand whether the device provides stereo sound, single‑speaker output, or specialized listening modes.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The impedance value indicates the resistance that a component or circuit offers to alternating current, expressed in ohms (Ω). It is used to characterize speakers, microphones, audio cables and other electronic equipment to ensure optimal compatibility with the source signal.

The electrical current drawn by a device when powered, expressed in amperes (A). It indicates how much current the product consumes from its power source during normal operation and can be used to assess compatibility with power supplies or USB ports.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

The outer jacket material is the substance that forms the protective sheath or covering of a product, such as cables, hoses, or enclosures. It determines durability, fire‑resistance, and suitability for specific environments. Common materials include PVC, LSZH, TPE, nylon, ABS, and their combinations.

The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness, energy efficiency and color accuracy of the screen.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

The material or composition of a magnet used in the product, such as neodymium, ferrite, or other magnetic alloys. It indicates the type of magnetic core that determines strength, size, and suitability for specific applications.

The material indicates the type of substance from which a product is made, such as metal, plastic, wood, glass, or composite materials. It helps users understand the product’s durability, weight, appearance, and suitability for specific applications.

The longest period a device can operate on a single charge before needing to be recharged, expressed in standard time units such as hours or minutes.

The maximum number of sheets a printer or paper feeder can hold at one time, expressed as an integer followed by the unit "sheets" (e.g., 500 sheets). This attribute helps users understand how much paper the device can accommodate before needing to be refilled.

The widest printable dimension of a product, expressed in a linear unit such as millimetres or inches. It indicates the maximum width of paper or media that can be fed through the device for printing operations.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The maximum distance across the widest part of a roll, expressed in units of length such as millimeters or centimeters. It indicates the largest diameter that a roll can have and is used to verify compatibility with devices, accessories, or systems requiring a specific roll size.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

Indicates the types of microphone connections available on a product, such as XLR, 3.5 mm jack, USB‑C, Lightning or wireless options. The value may list one or more connection types separated by commas.

The directional sensitivity of a microphone, indicating how it captures sound from different angles. Common patterns include omnidirectional (equal pickup from all directions), unidirectional or cardioid (focused on one direction), bidirectional (pickup from two opposite directions), and supercardioid or hypercardioid (narrower focus with some rear pickup). This attribute helps users choose a microphone that best suits their recording environment, whether they need wide coverage for group discus

The span of audible frequencies that a microphone can accurately capture, expressed as a minimum and maximum value in hertz (Hz). It indicates the lowest and highest tones the device can reproduce or record, helping users assess suitability for different audio applications.

The electrical impedance presented by a microphone input, expressed in ohms (Ω). It indicates the resistance that the input circuit offers to alternating current signals, affecting signal level and compatibility with microphones.

Indicates whether the product includes a functional mute button or control that allows the user to silence the microphone during operation. A value of "Yes" means a dedicated mute feature is present, while "No" indicates it is absent.

The acoustic sensitivity of a microphone, expressed in decibels (dB). It indicates how effectively the microphone converts sound pressure into an electrical signal; lower (more negative) values mean higher sensitivity and better performance at low sound levels.

The classification of a microphone’s design or pickup pattern, such as condenser, dynamic, lavalier, boom, built‑in, handheld or other types. It indicates the physical form and typical usage scenario of the microphone.

Specifies the capacity of each memory module in megabytes (MB) and its data bus width in bits. The value is expressed as a pair separated by an "x", for example "1024M x 64" indicates a 1 GB module with a 64‑bit wide interface.

Indicates whether the product includes a feature that reduces or eliminates unwanted ambient noise, such as active noise cancellation or built‑in sound‑absorbing technology.

The fundamental method by which the device delivers power or signal to its target, such as through direct electrical contact, wireless induction, or pressure‑based transfer. It indicates whether the product requires a physical connector, uses magnetic resonance, or relies on mechanical pressure for operation.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The type of electrical supply used by the product, such as AC mains, DC power, USB power, battery, or a combination of these options.

The range of direct‑current voltage that a device’s power supply can safely accept, expressed in volts (V). It specifies the minimum and maximum input voltages compatible with the product, covering both low‑voltage USB or battery supplies and higher‑voltage adapters.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

The maximum number of input/output operations per second that a storage device can perform when reading data randomly. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The maximum number of input/output operations per second that a storage device can perform when writing data randomly with 4‑KB blocks. This metric indicates how quickly the device can handle small, non‑sequential write requests and is useful for evaluating performance in database or high‑transaction workloads.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

A brief statement of the intended or most suitable use cases for a product, such as the type of environment (indoor, outdoor), activity (gaming, office work, music listening) or general application category. It helps customers quickly determine whether the item fits their needs.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The total amount of space that a product occupies or can hold, expressed as a volume measurement such as liters, milliliters, cubic centimeters, or other standard units. It represents the capacity or physical size in three dimensions and is used for items like containers, appliances, or any object where capacity matters.

A textual description of the way a product is worn or fitted on the body, such as "headband", "earhook", "neck‑band", "over‑the‑ear", or "in‑ear". This attribute helps users understand how the item will be positioned and secured during use.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.

A comma‑separated list of colour names that a writing instrument (pen, marker, highlighter) can produce or display. The values are simple colour names such as "Black", "Blue", "Red" and may include multiple entries separated by commas.