Fractal Design Define S - ATX Mid-Tower PC Case

Indicates whether the product includes a dedicated audio input port (e.g., 3.5 mm jack, RCA, optical). A value of "Yes" means an audio input is present; "No" means it is absent.

The total count of physical audio connectors available on the product, such as headphone jacks, RCA outputs, or optical ports. The value is an integer indicating how many separate audio input or output points can be used to connect external devices.

Indicates whether the product includes a built‑in system for organizing, routing, or securing cables. The value can be "Yes" when a cable management feature is present, "No" when it is absent, or a descriptive term such as "Cable Inlay System (CIS)" or "Cable Management System (CMS)" that specifies the type of integrated solution.

The edition or variant of a computer case, indicating a specific release such as "Standard", "Limited Edition", "Pro", or a numeric identifier. It distinguishes different versions of the same model and helps users identify the exact product they are viewing.

The physical configuration or design of a computer case, such as ATX, Micro‑ATX, Mini‑ITX, Mid Tower, Full Tower, Rackmount, or other standardized form factors. It indicates the dimensions, mounting points and expansion options that determine compatibility with motherboards and components.

A colour is a visual attribute that describes the hue or shade of an object or surface. It can be a single dominant colour, a combination of colours, or a range such as "Black, White". The value may be expressed in common names (e.g., Black, Silver) or descriptive terms (e.g., One Colour, Assorted).

The vertical dimension of a cooling unit measured from its lowest to highest point. The value is expressed in a physical unit such as millimetres, centimetres or inches and applies to any cooler component where height is relevant, including air coolers, liquid radiators and passive heat sinks.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render the visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The total number of drive bays available in a computer case or enclosure, expressed as a combination of the quantity of each bay type and its physical size (e.g., "4 x 2.5" Internal 2 x 3.5" Internal"). This attribute helps users understand how many drives can be installed and what sizes are supported.

The total number and sizes of fan slots available in the product, expressed as a series of "count x size" pairs (e.g., 4 × 120 mm). This attribute indicates how many fans can be installed and what dimensions they must have.

The number and size of fans that come with the product. Each entry lists how many fans of a specific diameter are included, such as "2 x 120mm" or "1 x 140mm w/ RGB LEDs". This information helps users understand the cooling capacity and lighting options available out of the box.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The linear dimension of a graphics card measured in a standard unit such as millimetres, centimetres or inches. It represents the overall length from one edge to the other and is used to determine whether the GPU will fit within a computer case or enclosure.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

Indicates whether the product incorporates LED lighting. A value of "Yes" means the device has one or more LEDs for illumination, while "No" indicates no LED components are present.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The total count of 2.5‑inch storage drives that a product can accommodate or support, whether as internal bays, expansion slots, or docking stations. The value is an integer representing how many separate 2.5‑inch drive units the system can host simultaneously.

The total count of 3.5‑inch hard disk drives that a product can accommodate, whether as internal bays or external enclosures. The value is an integer representing how many separate 3.5‑inch drive units the system can host simultaneously.

The maximum linear dimension of a graphics processing unit (GPU) that can be installed in a computer case, expressed with a standard length unit such as millimetres, centimetres or inches. It represents the longest side of the card and is used to determine whether a particular GPU will fit within a given chassis.

The maximum linear dimension of a graphics card that can fit within the product’s enclosure, expressed in a standard length unit such as centimeters or inches. It indicates how large a GPU can be installed without exceeding the case or chassis limits.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

The total count of physical expansion slots available on a computer case for installing additional hardware such as PCI‑Express cards, USB adapters or other peripheral modules. The value is an integer without any unit and represents how many separate slots can be used to expand the system’s capabilities.

The total count of individual cooling fans that are part of the product or its components. This value indicates how many separate fan units are installed, such as in a graphics card, CPU cooler, case, or other hardware assemblies.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

The physical position where the power supply unit is installed or mounted within a device, such as top, bottom, rear, side, front, or built‑in. This attribute helps users understand where to find the power source and plan cable routing or ventilation.

The linear measurement of a power supply unit from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the PSU is and can be used for fitting, compatibility, or spatial planning.

Indicates whether a power supply unit (PSU) is supplied with the product as part of its standard package. A value of "Yes" means the PSU is included and ready for use, while a value of "No" means no PSU is provided and must be purchased separately.

A list of power supply unit (PSU) form factors that a product can accommodate, such as ATX, MicroATX, SFX, SFX‑L, E‑ATX, or other standard sizes. Each value represents a distinct PSU type that the product is designed to support.

The total count of fan units installed on the rear side of a product or component. The value is an integer greater than zero and represents how many separate fans are present, which can affect cooling performance and noise levels.

Indicates whether the device has a physical reset button that restores factory settings or original configuration when pressed.

Indicates whether the product includes a side panel window that allows visual access or ventilation to internal components.

A list of the physical dimensions of hard drives that a product can accommodate, expressed in inches or millimeters (e.g., "2.5", "3.5", "M.2"). The values are typically separated by commas and indicate which drive form factors fit within the device’s bays or slots.

A list of the physical layout and size classifications of motherboards that a computer case or chassis supports, such as ATX, Micro‑ATX, Mini‑ITX, E‑ATX, SSI CEB, etc. Each value represents a distinct form factor that can be mounted in the device.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

Indicates whether the product is compatible with at least one version of Microsoft Windows. A value "Yes" means the device can run or support a Windows operating system, while "No" indicates incompatibility.