GIGABYTE B365M DS3H

Indicates whether the product can run or is compatible with a 64‑bit operating system or architecture. A value of "Yes" means the device supports 64‑bit software, while "No" indicates it does not.

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product supports individually addressable RGB lighting, allowing each LED to be controlled independently for custom color and effects.

Indicates how many audio input connectors are available on the product, such as 3.5 mm jacks, mini‑jacks or optical inputs. The value is a simple integer representing the total count of these ports, regardless of their specific type or version.

Indicates how many audio line‑out connectors are available on the product. The value is a simple integer representing the total count of line‑out ports (e.g., 3.5 mm jacks, RCA, optical). This attribute helps users determine how many external speakers or headphones can be connected simultaneously.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

The company that designs and produces the chipset used in a motherboard or other computer component. This value helps users identify the source of the chipset technology, assess compatibility, support, and performance expectations.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

A list of the fan header types that a motherboard or system board provides for connecting cooling fans and related components such as water pumps or chassis fans. Each entry describes a specific header, e.g., "CPU Fan", "Chassis Fan", "System Fan", "Water Pump Fan" or combinations thereof. The values are typically separated by commas or spaces and may include multiple headers in one string.

The physical connector used by a processor to attach to a motherboard or other compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates how many DVI connectors are present on the product. The value is a simple integer representing the total count of DVI ports, regardless of type or version.

Indicates whether the product includes at least one DisplayPort connector for high‑resolution video and audio transmission. A value of "Yes" means the device has a physical DisplayPort port; "No" indicates it does not.

A list of software driver types that the product supports or includes, such as TWAIN, WIA, ISIS, or other platform‑specific driver interfaces. Each entry indicates a distinct driver protocol that can be used to communicate with the device or software.

Indicates whether the product includes a DVI (Digital Visual Interface) port for video output. A value of "Yes" means the device has a DVI connector; "No" means it does not.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product has any FireWire (IEEE 1394) ports available for connecting compatible devices.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether the product includes a connector on its front panel. The value can be "Yes" or "No", representing the presence or absence of this port.

A comma‑separated or bullet‑pointed enumeration of the input and output connectors that are mounted on the front side of a product, such as USB ports, audio jacks, HDMI, DVI, RJ‑45, optical audio, etc. The list shows which interfaces are available for external devices and helps users determine connectivity options.

The total count of physical HDMI connectors available on the product for transmitting digital audio and video signals.

Indicates whether a device includes an integrated graphics processor, such as Intel HD Graphics or AMD Radeon Vega. The value is "Yes" if the product has built‑in GPU capabilities and "No" otherwise.

Indicates whether the product includes an internal USB 3.0 header that can be used to connect peripherals such as keyboards, mice or storage devices directly inside the system. A value of "Yes" means the header is present and usable; "No" means it is absent.

Indicates how many integrated keyboard and mouse combo ports are present on a computer or peripheral, typically expressed as a count (e.g., "1" for one port). This attribute helps users determine the availability of a combined input interface without needing separate connectors.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

Indicates whether the product includes an M.2 interface for connecting storage or expansion devices such as SSDs, Wi‑Fi cards, or NVMe modules.

The highest number of processor units that a computer or electronic device can accommodate, as determined by its motherboard or system architecture. This count indicates the maximum CPU capacity for parallel processing and is useful when comparing multi‑core or multi‑socket systems.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The maximum theoretical speed at which the system bus can transfer data, expressed in hertz (Hz) or commonly as megahertz (MHz). It indicates the bandwidth capacity of the internal communication pathway between components such as the CPU and memory or peripheral devices.

The number of memory channels supported by a motherboard or processor, indicating how many independent data paths are available for RAM modules. Common values include "Single", "Dual (2)", "Quad (4)" and similar descriptors. This attribute helps users understand the potential memory bandwidth and upgrade options for a system.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

The pin configuration of the power connector(s) used by a motherboard, expressed as a textual description such as "4 + 8-Pin" or "4-Pin x 2". It indicates how many pins are present in each connector and whether multiple connectors are required for proper operation.

Indicates whether a graphics card or motherboard can operate with more than one GPU simultaneously, and if so, which multi‑GPU technologies are supported (e.g., CrossFire, NVLink). The value is typically a textual description of the supported configuration.

A list of the maximum data transfer rates that a network interface can support, expressed in bits per second or common abbreviations such as Gbps or Mbps. Each value indicates a speed that the device is capable of achieving over a wired connection.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The total count of electrical connectors on a computer chassis that accept cooling fans. This value indicates how many separate fan units can be attached to the case for airflow management, allowing users to assess cooling capacity and compatibility with their system.

The total count of PCI Express expansion slots available on the product, regardless of their lane configuration (x1, x4, x8, or x16). This value indicates how many separate PCI Express interfaces can be used to install cards such as graphics, network, or storage adapters.

The total count of physical SATA III (Serial ATA Revision 3) ports available on a product. It indicates how many internal connections can be used to attach storage devices such as hard drives or solid‑state drives that support the SATA III interface.

Indicates whether a product has integrated RGB lighting that can be controlled directly from the board or motherboard, and if so, which software or firmware interface is used (e.g., Aura Sync, Mystic Light, RGB Fusion). This attribute helps users identify compatibility with RGB management tools and understand how to customize lighting effects.

The total count of physical PCI Express x1 expansion slots available on a device, indicating how many single‑lane interfaces can be used for peripherals such as low‑power graphics cards or add‑on modules.

Specifies the type and configuration of power connectors present on a computer or electronic device, such as ATX, EPS, CPU, or 12V sockets, including pin counts and optional secondary pins (e.g., "1 x 20+4-pin ATX"). The value is a textual description that conveys which power ports are available for connecting the system’s power supply.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

A list of supported RAID configurations that a storage controller or motherboard can implement, such as "0", "1", "5", "6", "10" and special modes like "JBOD". Each value represents an available combination of disk redundancy and performance options for the device.

A comma‑separated list of the RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, and special modes like JBOD. Each entry represents an independent configuration option available to the user.

Represents the total count of RJ‑45 Ethernet interfaces present on a product. Each port can accept a standard Ethernet cable for wired network connectivity.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

Indicates whether the product includes a SATA III interface for connecting storage devices such as hard drives or SSDs. A value of "Yes" means the device has at least one SATA III port, while "No" indicates it does not.

Indicates whether the product includes a SATA interface for connecting storage devices. A value of "Yes" means the device has at least one SATA port, while "No" indicates it does not.

Indicates whether the product’s audio functionality has been bypassed or omitted during testing. A value of "Yes" means the audio test was intentionally skipped, while "No" indicates that the audio subsystem was evaluated.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of the types of storage drives that a product can accommodate or use, such as HDD, SSD, or hybrid configurations. Each entry indicates a distinct drive type that is supported by the device’s bays, slots, or external interfaces.

The total count of Thunderbolt interfaces available on the product, indicating how many separate Thunderbolt connections it supports.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.

Indicates whether the product includes a USB 3.0 interface, allowing faster data transfer speeds compared to earlier USB standards.

Indicates whether the product includes a USB 3.1 interface, allowing faster data transfer rates compared to earlier USB standards. A value of "Yes" means the device has at least one USB 3.1 port; "No" indicates it does not.

A comma‑separated or bullet‑pointed enumeration of the USB ports present on a product, indicating each USB interface type (e.g., USB 2.0, USB 3.0, USB 3.1 Gen 1/Gen 2, Type‑C) and its quantity.

Indicates whether the product includes a VGA (Video Graphics Array) port for analog video output. A value of "Yes" means the device has a VGA connector; "No" indicates it does not.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

Indicates the wireless local area network (LAN) capabilities of a product, such as supported Wi‑Fi standards and features. The value is typically a textual description of the standard(s) or technology used.

Indicates whether a product has built‑in wireless networking capability, allowing it to connect to Wi‑Fi networks without requiring an external adapter or dongle.