Gigabyte H110M‑S2 Compact mATX

Indicates whether the product can run or is compatible with a 64‑bit operating system or architecture. A value of "Yes" means the device supports 64‑bit software, while "No" indicates it does not.

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product supports individually addressable RGB lighting, allowing each LED to be controlled independently for custom color and effects.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates how many audio input connectors are available on the product, such as 3.5 mm jacks, mini‑jacks or optical inputs. The value is a simple integer representing the total count of these ports, regardless of their specific type or version.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

A list of software programs and utilities that come pre-installed or bundled with the product, such as operating systems, drivers, antivirus suites, or other essential applications.

The company that designs and produces the chipset used in a motherboard or other computer component. This value helps users identify the source of the chipset technology, assess compatibility, support, and performance expectations.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The physical connector used by a processor to attach to a motherboard or other compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

Indicates whether the product includes at least one DisplayPort connector for high‑resolution video and audio transmission. A value of "Yes" means the device has a physical DisplayPort port; "No" indicates it does not.

Indicates whether the product includes a DVI (Digital Visual Interface) port for video output. A value of "Yes" means the device has a DVI connector; "No" means it does not.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product has any FireWire (IEEE 1394) ports available for connecting compatible devices.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

The specific model or designation of the graphics adapter present in a device, such as "Intel HD Graphics", "AMD Radeon Vega 8", or "NVIDIA GeForce GTX 1660". This value helps users understand the visual performance and capabilities that the product can deliver.

The total count of physical HDMI connectors available on the product for transmitting digital audio and video signals.

Represents how many separate headphone output ports a product provides, such as the number of 3.5 mm jacks or other audio connectors available for headphones or earphones.

Indicates whether a device includes an integrated graphics processor, such as Intel HD Graphics or AMD Radeon Vega. The value is "Yes" if the product has built‑in GPU capabilities and "No" otherwise.

Indicates whether the product includes an internal USB 3.0 header that can be used to connect peripherals such as keyboards, mice or storage devices directly inside the system. A value of "Yes" means the header is present and usable; "No" means it is absent.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

Indicates whether the product includes an M.2 interface for connecting storage or expansion devices such as SSDs, Wi‑Fi cards, or NVMe modules.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The amount of dedicated video memory available on a graphics adapter or GPU, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the GPU can store for textures, frame buffers and other rendering tasks, affecting performance in gaming, 3D applications and high‑resolution displays.

The highest number of processor units that a computer or electronic device can accommodate, as determined by its motherboard or system architecture. This count indicates the maximum CPU capacity for parallel processing and is useful when comparing multi‑core or multi‑socket systems.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The maximum theoretical speed at which the system bus can transfer data, expressed in hertz (Hz) or commonly as megahertz (MHz). It indicates the bandwidth capacity of the internal communication pathway between components such as the CPU and memory or peripheral devices.

The number of memory channels supported by a motherboard or processor, indicating how many independent data paths are available for RAM modules. Common values include "Single", "Dual (2)", "Quad (4)" and similar descriptors. This attribute helps users understand the potential memory bandwidth and upgrade options for a system.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

Indicates whether a graphics card or motherboard can operate with more than one GPU simultaneously, and if so, which multi‑GPU technologies are supported (e.g., CrossFire, NVLink). The value is typically a textual description of the supported configuration.

A list of the maximum data transfer rates that a network interface can support, expressed in bits per second or common abbreviations such as Gbps or Mbps. Each value indicates a speed that the device is capable of achieving over a wired connection.

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

Indicates whether a product has integrated RGB lighting that can be controlled directly from the board or motherboard, and if so, which software or firmware interface is used (e.g., Aura Sync, Mystic Light, RGB Fusion). This attribute helps users identify compatibility with RGB management tools and understand how to customize lighting effects.

A list of hardware components that the system tracks to monitor their operational status and performance. Typical entries include CPU, fan, temperature sensors, voltage regulators, power supply units, and other critical subsystems. The list helps users understand which parts are being monitored for health alerts or performance metrics.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

A comma‑separated list of the RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, and special modes like JBOD. Each entry represents an independent configuration option available to the user.

Represents the total count of RJ‑45 Ethernet interfaces present on a product. Each port can accept a standard Ethernet cable for wired network connectivity.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

Indicates whether the product includes a SATA III interface for connecting storage devices such as hard drives or SSDs. A value of "Yes" means the device has at least one SATA III port, while "No" indicates it does not.

Indicates whether the product includes a SATA interface for connecting storage devices. A value of "Yes" means the device has at least one SATA port, while "No" indicates it does not.

Indicates whether the product’s audio functionality has been bypassed or omitted during testing. A value of "Yes" means the audio test was intentionally skipped, while "No" indicates that the audio subsystem was evaluated.

List of physical or logical interfaces that allow an internal storage drive to communicate with the system, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

The total count of Thunderbolt interfaces available on the product, indicating how many separate Thunderbolt connections it supports.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

Indicates whether the product includes a USB 3.0 interface, allowing faster data transfer speeds compared to earlier USB standards.

Indicates whether the product includes a USB 3.1 interface, allowing faster data transfer rates compared to earlier USB standards. A value of "Yes" means the device has at least one USB 3.1 port; "No" indicates it does not.

The specific type of USB connector used by a device, such as USB Type‑A, USB Type‑B, USB Type‑C, Micro‑USB, Mini‑USB, or other variants. It indicates the physical port that allows data transfer and power delivery between the device and peripherals.

Indicates whether the product includes a VGA (Video Graphics Array) port for analog video output. A value of "Yes" means the device has a VGA connector; "No" indicates it does not.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

Indicates whether a product has built‑in wireless networking capability, allowing it to connect to Wi‑Fi networks without requiring an external adapter or dongle.