HotPlug Midline 7.2K 2.5" NLSATA OEM

Identifiers
Model	Origin Storage CPQ-1000NLSA/7-S6
MPN	Origin Storage CPQ-1000NLSA/7-S6
Dimensions / Weight
Key Features
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.	4.16 ms
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.	512
Compatible products	HP Proliant ML
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.	Server/workstation
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.	100.5 mm
HDD caddy included Indicates whether a hard‑disk drive caddy is supplied with the product. A value of "Yes" means a caddy for mounting or transporting the drive is included in the package, while "No" indicates that no caddy is provided and must be purchased separately.	Yes
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.	1000 GB
HDD interface transfer rate The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.	6 Gbit/s
HDD number of heads The total count of read/write head assemblies present in a hard disk drive (HDD). Each head is responsible for accessing data on one platter surface; the number of heads determines how many platters can be serviced simultaneously and influences the drive’s capacity and performance. The value is an integer without any unit.	16
HDD size The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.	2.5"
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.	7200 RPM
HDD sustained transfer rate The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.	115 MiB/s
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.	15 mm
Hot-swap Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.	Yes
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.	NL-SATA
Internal Indicates whether the product is designed to be installed inside a computer system or other device, such as an internal hard drive, SSD, network card, or component. A value of "Yes" means it can be mounted within the chassis; a value of "No" indicates it is intended for external use.	Yes
Linux operating systems supported List of Linux operating systems that the product is compatible with, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.	Yes
Non-operating altitude The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.	-61 - 12210 m
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.	400 G
Non-operating vibration	3 G
Operating altitude The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.	-61 - 3048 m
Operating shock	70 G
Operating vibration The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.	0.5 G
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.	5 V
Power consumption (read)	5.21 W
Read Seek Time The average time required for a storage device to position its read/write head over the correct track before accessing data. It is expressed in milliseconds (ms) and indicates how quickly the device can begin reading or writing after a command is issued.	7.5 ms
Refurbished Indicates whether the product has been refurbished, meaning it has undergone a quality inspection and repair process to restore it to a like-new condition before resale.	No
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.	Yes
Start-up current The electrical current drawn by a device when it first powers on, expressed in amperes (A). It represents the initial surge of current required to start the product and can help users assess power supply compatibility or identify potential overload risks.	18.35 A
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.	No
Storage drive buffer size The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.	64 MB
Type The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.	HDD
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.	320 g
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	70.1 mm
Windows operating systems supported A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.	Yes
Write seek time The average time required for a storage device to move its read/write head to the desired track before performing an operation, expressed in milliseconds (ms). It indicates how quickly a drive can access data and is critical for overall performance.	8.5 ms

Origin Storage is a leading provider of storage solutions, including hard drives, SSDs, memory and accessories. The company offers a wide range of products for both consumers and businesses, and its products are known for their quality, reliability and performance. Origin Storage is committed to providing the best possible customer experience, and its products are backed by a comprehensive warranty.