HP Color LaserJet Enterprise 577 Series

Indicates whether the product has been certified by Blue Angel, a recognized sustainability and quality standard that ensures compliance with environmental and social criteria.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

The type of cable or connector technology used by the product, such as Ethernet standards (e.g., 10/100Base‑T, 1000BASE‑T, 10GBase‑T) or other networking cable types. It indicates the physical medium and protocol supported for data transmission.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The mechanism or method used to operate a product, such as buttons, knobs, touch panels, rotary dials, sensors, or combinations of these. It indicates how the user interacts with the device and what types of controls are available.

The percentage by which a document is scaled when printed, copied or scanned. A value of 100% means the output size matches the original; values below 100% reduce the size and values above 100% enlarge it.

Indicates whether the device can perform copy functions and the type of copying it supports (e.g., colour or monochrome). The value is a free‑text label that describes the copying feature available on the product.

The linear dimension of the media that a device can handle, expressed as a range in millimetres (mm). It represents the minimum and maximum size of paper or other media supported by the product.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product can transmit digital signals or data, such as through a digital output interface. The value is "Yes" if the device supports digital sending and "No" otherwise.

A list of file formats that the product can open, view or print, such as PDF, DOCX, TXT, XPS and other common office or text documents. Each value represents a distinct format supported by the device’s software or firmware.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

Indicates whether the device can automatically print on both sides of a sheet in a single pass. A value of "Yes" means duplex printing is supported; a value of "No" indicates that only single‑sided printing is available.

Indicates whether a device can scan both sides of a sheet in a single pass. A value of "Yes" means the scanner automatically captures the front and back of each page, while "No" indicates that only one side can be scanned at a time.

A list of envelope sizes that a product can accept, expressed with standard codes or names (e.g., "DL", "C5", "10"), optionally combined in comma‑separated groups to indicate compatible envelopes.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The time required for a fax machine to transmit one page, expressed as seconds per page. This metric indicates the speed of the device’s faxing capability and allows users to compare how quickly different models can send or receive documents.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A list of the file extensions and codecs that a product can read or write for images. Each value represents a valid format such as JPG, PNG, BMP, GIF, HEIF, WebP, etc., and may include multiple formats separated by commas.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The highest pixel resolution that a printer can produce, expressed as width by height (e.g., 600x1200). It indicates the finest detail achievable in printed documents and images.

The maximum number of pages a printer, copier or fax machine is designed to handle in a typical month of operation. It indicates the expected workload capacity and helps users compare how heavily different models can be used before reaching their limits.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The total count of individual copies that a product can produce, print, or otherwise deliver in a single operation or session. It represents the maximum number of identical units that the device is capable of handling at once, such as the number of pages a printer can copy before needing to pause or reload. The value is an integer and may be accompanied by the word "copies" for clarity.

The highest number of sheets a printer, copier or fax machine can process in a single operation cycle, such as printing, copying or scanning. This figure indicates the device’s throughput capability and helps users compare productivity across models.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height in pixels or physical units such as millimeters or inches. This value indicates the maximum size of material that can be processed without trimming.

The smallest amount of system memory required for a product to operate correctly, expressed in gigabytes or megabytes. This value indicates the minimum RAM capacity that a device must have to run its software and hardware components without performance degradation.

The smallest amount of internal or built‑in storage that a product requires to operate, typically expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand the minimum space needed for the operating system, essential applications, and basic usage.

A comma‑separated list of mobile printing services or protocols that a device can use to send print jobs from smartphones, tablets or other mobile devices. Typical values include Apple AirPrint, Google Cloud Print, Mopria Print Service and similar cloud‑based solutions.

A list of natural languages in which the page descriptions or captions of a product are available. This attribute indicates the linguistic options for textual information that accompanies each page, such as titles, annotations, or metadata.

A list of the paper or media types that a printer’s input trays can accept, such as envelopes, labels, plain paper, recycled paper, and transparencies. The values are free‑text strings separated by commas, allowing users to see which materials are compatible with the device.

The weight of the paper or media measured in grams per square metre. It indicates how heavy a sheet of material is and can be used to compare paper density, estimate printing costs, or assess suitability for specific printing tasks.

A list of the dimensions and names of photo‑paper formats that a device can print on, such as "10x15 cm", "4x6", or custom sizes expressed in millimetres or inches. Each value represents a distinct paper size that the printer is capable of handling for photographic output.

The type of printing process or technology used by the product, such as laser, inkjet, thermal, LED, or other specialized methods.

Indicates whether the printer can produce colour output or is limited to monochrome (black‑and‑white) printing. Typical values are "Colour printing" for devices that support full colour, "Mono printing" for black‑only devices, and "No" when colour capability is not available.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

The expected number of pages a printer, copier or fax machine is designed to produce in an average month under normal operating conditions. It indicates the workload capacity that the device can handle without overheating or failure.

A list of destinations or methods to which a device can send scanned documents, such as email, FTP, cloud services, USB storage, or local PC. Each option represents a supported transfer protocol or target location for the scanned output.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

Indicates whether the product can perform scanning operations and what type of scans it supports (e.g., color or monochrome). The value is a free‑text label that may include terms such as "Color scanning", "Mono scanning" or simply "Yes/No" to denote availability.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

The maximum number of individual pages that a product—such as a book, magazine, or printed publication—can contain. It represents the total count of physical sheets, regardless of layout or formatting, and is useful for assessing the length or volume of the material.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.