INTEL Xeon E5-2643V3 3.4 GHz LGA2011 CPU

Indicates whether a product is supplied in a closed box or container. A value of "Yes" means the item comes with protective packaging; a value of "No" indicates it does not.

The maximum frequency at which a system bus can transfer data, expressed in hertz (Hz). It indicates the theoretical throughput capability of the bus and allows users to compare performance across different processors or components.

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

The interface speed or bandwidth specification of a computer component, such as a processor or memory bus. Common units include GT/s (giga‑transfers per second) for PCIe lanes and MHz for clock frequencies. It indicates the maximum data transfer rate that the component can achieve under ideal conditions.

The amount of internal memory reserved as a cache within a device or component, expressed in a data size such as megabytes (MB) or gigabytes (GB). It represents the temporary storage used to accelerate read/write operations by holding frequently accessed data closer to the processor or controller.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

Indicates whether the product is compatible with Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Demand‑Based Switching technology, which dynamically adjusts power delivery to components based on workload demands, improving energy efficiency and performance.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates the specific version number of Intel’s Identity Protection Technology that a product supports or implements. The value is typically a numeric string such as "1.00" or "0.00", representing the major and minor revision of the feature set.

The specific version number of Intel Secure Key technology supported by the processor, indicating the generation and capabilities of the secure key feature set.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The largest amount of internal random‑access memory (RAM) that a processor can address and support, expressed as a data size such as megabytes or gigabytes. It indicates the upper limit of memory capacity for active processes and multitasking performance on devices using this CPU.

The total count of PCI Express lanes available on a device or component, indicating the maximum number of high‑speed data channels that can be used simultaneously for peripherals such as graphics cards, storage controllers, and networking adapters.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The set of operating frequencies that a processor can run at, expressed in hertz (Hz). Values are typically listed as individual frequencies or ranges separated by commas, indicating the base clock and any boost or turbo options available for the CPU.

A list of the types of memory modules that a device can use, such as DDR4 SDRAM, LPDDR3, or other compatible standards. Each entry represents a distinct memory technology supported by the hardware.

The total count of Quick Path Interconnect (QPI) connections present in a processor or motherboard. This value indicates how many QPI links are available for high‑speed communication between CPUs, memory controllers, or other components. It is a simple integer that helps users compare interconnect capabilities across different models.

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

The PCI Express Common Extensible Module (CEM) revision indicates the version of the PCI Express specification supported by a device or component. It is expressed as a numeric value such as 2.0, 3.0, or 4.0 and determines compatibility with PCIe devices and the maximum achievable bandwidth.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

The Processor ARK ID is a numeric identifier assigned by Intel to each processor model. It uniquely distinguishes one CPU from another and can be used to look up detailed specifications, compatibility information, or firmware updates for that specific chip.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

Indicates the level or category of a processor’s internal cache memory, such as L1, L2, L3, or Smart Cache. This attribute helps users understand the hierarchy and accessibility of cached data within the CPU, which can influence performance characteristics.

A unique identifier that represents the specific model or variant of a computer processor. The code is typically an alphanumeric string (e.g., "SR2ZU", "SR3LA") used by manufacturers to distinguish between different CPU models, generations, and configurations. It can be entered as free text and may appear in product listings, technical specifications, or inventory records.

The total number of physical processing units in a single central processing unit (CPU). This value indicates how many independent tasks the CPU can handle simultaneously, influencing multitasking and parallel performance.

The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The set of instruction set architectures or execution modes that a processor can operate in, such as 32‑bit or 64‑bit. This attribute lists the supported modes for the CPU and helps users determine compatibility with software that requires a specific bitness.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The processor series identifies the family or generation of a CPU, such as "Intel Xeon E5-2600" or "AMD Ryzen 5000". It is used to group models that share similar architecture, performance characteristics and compatibility features.

The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.

The physical connector type used by a processor, motherboard or other component to interface with its platform, such as LGA1151, Socket AM4, LGA1200, etc. This attribute helps users determine compatibility between CPUs and motherboards.

Indicates the general classification or type of an item, such as "laptop", "projector", "router" or "paint". It helps users quickly identify the nature of the product and compare similar items across categories.

A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.

Valor que indica la temperatura a la cual el producto opera o se mantiene durante su uso normal. Se expresa en grados Celsius, Fahrenheit o Kelvin según el contexto del fabricante y permite comparar condiciones térmicas entre dispositivos similares.

The range of electrical voltage that a CPU can safely accept from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the processor, covering both AC and DC inputs where applicable.