Intermec 1-010043-900 Print Head

Indicates whether a device is capable of displaying or supporting three‑dimensional content, such as 3D video playback, 3D graphics rendering, or compatibility with 3D display technologies. A value of "Yes" means the device can handle 3D formats and provide a stereoscopic viewing experience; "No" indicates it does not support 3D functionality.

Indicates whether the product can run software or operating systems that require a 64‑bit architecture.

Indicates whether the product comes with an AC power adapter included in the package. A value of "Yes" means a charger is supplied, while "No" indicates that no charger is provided and the user must obtain one separately.

The electrical current drawn by an AC adapter when powering a device, expressed in amperes (A). It indicates how much current the adapter supplies to the product during normal operation and helps users verify compatibility with power sources or other equipment.

The range of alternating current voltage that an AC adapter can accept, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the device, ensuring safe operation across different regions and power standards.

The electrical current supplied by an AC power adapter to a device, expressed in amperes (A). It indicates the maximum output current that the adapter can provide under normal operating conditions and helps users verify compatibility with devices or accessories that require a specific input current.

The electrical potential difference supplied by the AC adapter to a device, expressed in volts (V). It indicates the nominal voltage that the charger outputs and is used to match the adapter with compatible equipment.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

Indicates whether the product requires an AC mains power supply. A value of "Yes" means the device can be powered from a standard electrical outlet, while "No" indicates it does not use AC mains power (e.g., battery‑powered or USB‑only devices).

The standard analog video signal format that a device can receive or transmit, such as NTSC, PAL, or SECAM. Each value represents one of the common broadcast standards used for television and video equipment.

A list of audio codecs and file formats that the product can play or output, such as AAC, MP3, FLAC, Dolby Digital, DTS, etc. Each value represents a supported combination of compression technology and file extension.

Specifies the audio system installed or supported by the product, such as Dolby Audio, SonicMaster, MaxxAudio Pro, or other proprietary audio processing technologies. The value is a free‑text string that identifies the main audio engine or brand used for sound playback and processing.

Indicates whether a camera or imaging device provides an assist beam for auto‑focus operation, typically used to illuminate the subject and improve focus accuracy in low‑light conditions.

The total count of autofocus (AF) points available in a camera or lens. This number indicates how many distinct focus areas the device can use to lock onto subjects, affecting focusing precision and speed.

A list of the available autofocus modes that a camera or imaging device can use, such as continuous autofocus, single-shot autofocus, face detection, tracking autofocus, contrast‑detection autofocus, servo‑autofocus, AI focus, and other manufacturer‑specific combinations. Each mode is represented by a free‑text string.

The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

Indicates whether the product comes with batteries included in the package. A value of "Yes" means that batteries are supplied, while a value of "No" indicates that no batteries are provided and must be purchased separately.

Indicates whether a battery charger is supplied with the product. A value of "Yes" means a charger is included, while "No" indicates that no charger is provided and must be purchased separately.

The duration a device can operate on a single charge before needing to be recharged, expressed in various time units such as hours, days or months.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The chemical composition or classification of a battery, such as alkaline, lithium‑ion, NiMH, or lead‑acid. It indicates the energy storage technology used in the product and helps users identify compatibility with devices that require specific battery chemistries.

Indicates whether the product includes a border around its main functional area (e.g., a screen or display). A value of "Yes" means a border is present; "No" means it is absent.

Indicates whether the device supports adjusting its brightness level. A value of "Yes" means the user can change the display or camera exposure brightness, while "No" indicates a fixed setting.

The type of buffering applied to a memory module, indicating whether the RAM is unbuffered (unregistered), buffered (registered), or fully buffered. This attribute helps users understand compatibility and performance characteristics for computer systems.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

Indicates whether the product includes a built‑in stereo microphone, i.e., a single integrated microphone that captures sound from two channels for higher audio fidelity. A value of "Yes" means such a microphone is present; "No" indicates it is absent.

Indicates whether the product contains a built‑in central processing unit (CPU) that can execute instructions without requiring an external processor module. A value of "Yes" means the device has such a CPU; "No" means it does not.

Indicates whether the product includes built‑in speaker(s) that can produce sound without requiring external audio devices. A value of "Yes" means the device has one or more integrated speakers; a value of "No" means it does not.

The total number of integrated speaker units present in the product. This value indicates how many separate speaker elements are built into the device, helping users compare audio capabilities across models.

A list of software applications, operating systems, drivers, or utilities that are pre-installed or bundled with the product. The values may include antivirus suites, productivity tools, device management utilities, and other essential software components.

The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.

Specifies the type of interface or mechanism used to secure a cable in its port, such as Kensington, Noble, IBM, or other standard lock slots. This attribute helps users identify compatibility and security features of the device.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

The category or technology of a cable, such as Cat5e, Cat6, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

The category or technology of a cable, such as Cat5e, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

A list of the image and metadata file formats that a camera can capture or store, such as DPOF, Exif, RAW, MPF, or DCF. Each entry represents a distinct format supported by the device, allowing users to understand what types of files they will receive when using the camera.

The types of media playback that the camera can handle, such as movies, single images, slide shows, or thumbnails. Each value represents a distinct mode in which captured content can be viewed directly on the device.

The general classification of a camera, such as compact, single‑lens reflex (SLR), mirrorless interchangeable lens camera (MILC), bridge, or video camera. It indicates the form factor and primary use case of the device.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The number of clock cycles that a memory module takes to complete a read operation after the address has been sent. It indicates how quickly data can be accessed from RAM and affects overall system performance, especially in high‑speed memory configurations.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The chipset is the collection of integrated circuits that manages communication between a computer’s CPU, memory, and peripheral devices. It defines the supported processor families, available I/O interfaces, and overall system capabilities, allowing users to understand compatibility and feature sets for motherboards or other hardware components.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Represents the total magnification achieved by a camera or imaging device, combining both optical and digital zoom components. The value is expressed as a plain number (optionally followed by an "x" suffix, e.g., 4x or 5.6) without any unit. It indicates how many times the image or field of view is enlarged compared to its original size.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

A list of the electrical plug or socket types that a product can accept, such as UK, EU, US, AU, JP, etc. Each value represents a distinct plug configuration that the device is designed to accommodate, allowing users to determine if it will fit their local outlets.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The material or construction style of the cable’s conductors, such as stranded copper, solid copper, or other conductive materials. It indicates how the individual wires are arranged and what material they are made of, which affects flexibility, durability, and signal integrity.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

Indicates the gender or sex classification of a connector, such as Male, Female, or Unspecified. This attribute helps users identify whether a cable or port is designed for insertion (Male) or reception (Female).

The physical interface or port used to connect a device to another component, such as USB, HDMI, RJ‑45, audio jacks, or fiber optic connectors. It identifies the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

Indicates whether the second end of a cable or connector is male, female, or another gender type. This value helps users determine compatibility with other components and ensures proper mating of connectors.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The contrast ratio is the proportion between the brightest and darkest luminance a display can produce, expressed as a simple ratio such as 1000:1. It indicates how well a screen can differentiate light from dark areas, affecting image clarity and color depth.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Represents the multiplier that indicates how many times an image or field of view is enlarged by digital zoom. The value is expressed as a number without units, such as "4x" or "1.5x", where the numeric part indicates the factor of increase.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The classification of a storage device’s mechanical or solid‑state nature, such as Internal, External, Portable, Motorized, Manual, SSD, HDD, Blu‑ray Writer, etc. It indicates how the drive is mounted and operated within or outside a system.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product includes an external flash connector that can be used to attach a separate flash unit for additional lighting. A value of "Yes" means such a connector is present; a value of "No" (or equivalent) means it is absent.

Indicates whether the product comes with an external power adapter in its packaging. A value of "Yes" means a charger is supplied; a value of "No" means no charger is included and the user must obtain one separately.

The linear measurement across the widest part of a fan, expressed in units such as millimeters (mm), centimeters (cm) or inches (in). It represents the overall width of the fan and is useful for determining fit, compatibility with cases, and airflow characteristics.

The maximum duration that a camera’s shutter remains open to expose the sensor or film, expressed in seconds or fractions of a second (e.g., 1/4000 s). It determines how motion is captured and affects exposure; shorter times freeze action while longer times allow more light for low‑light situations.

The proportion or angular extent that a device, such as a camera or binocular, can capture or display. Values may be expressed as a percentage of coverage (e.g., 100 %) or in degrees for horizontal/vertical angles (e.g., 160°). The attribute indicates how wide the field of view is relative to the sensor or lens.

A list of the available settings for a camera or imaging device’s flash system, such as Auto, Manual, Flash off, Flash on, Red‑eye reduction, Slow synchronization, and other manufacturer‑specific options. Each value represents a selectable mode that determines how the flash is activated during image capture.

The minimum and maximum distance, expressed in meters, at which a camera’s flash can effectively illuminate a subject or scene. This range indicates the effective reach of the flash for proper exposure.

The maximum distance at which the camera’s flash can effectively illuminate a subject, expressed as a numeric range in meters (e.g., "1 - 3 m"). This attribute indicates how far the flash light reaches under typical shooting conditions.

Indicates whether the device has a screen that can be rotated or flipped out from its main body, allowing easier viewing of images or video while shooting. The value is "Yes" if such a feature exists and "No" otherwise.

The minimum and maximum focal lengths that a camera lens or optical system can cover, expressed in millimetres (mm). It indicates the zoom capability of the device and helps users understand the field‑of‑view range available.

Specifies the focusing behavior of a camera or imaging device, indicating whether it uses automatic focus, manual focus, or a combination such as auto‑manual. The value is expressed as a free‑text string that describes the mode in use.

Specifies whether the camera’s focusing system operates automatically or requires manual adjustment. Common values include "Auto", "Manual", and combinations such as "Auto/Manual".

Indicates the physical or digital format in which a product is presented, such as "Hardback", "Paperback", "DVD", "Blu‑ray", "Vinyl", or other media types. The value may contain multiple comma‑separated items to represent combined attributes (e.g., "Hardback, Illustrated").

Indicates whether the product is capable of displaying or transmitting video at Full HD resolution (1920 × 1080 pixels). A value of "Yes" means that Full HD functionality is supported, while a value of "No" indicates it is not available.

Indicates whether the product includes a hand strap for carrying or securing it during use. The value is "Yes" or "No", showing presence or absence of the strap.

Indicates whether a handheld device can be operated from a distance using an external remote control such as infrared, Bluetooth or Wi‑Fi. A value of "Yes" means the product supports remote operation; "No" indicates it does not.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

Indicates whether a hard‑disk drive caddy is supplied with the product. A value of "Yes" means a caddy for mounting or transporting the drive is included in the package, while "No" indicates that no caddy is provided and must be purchased separately.

The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.

The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.

The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.

A list of the HDMI ports available on the product, each entry indicating the number of ports and their specific HDMI version or additional features (e.g., "2 x HDMI 2.0b", "1 x HDMI 1.4 with CEC"). This attribute helps users understand both the quantity and capabilities of the HDMI connections.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the camera includes a histogram display in its viewfinder or LCD screen, allowing users to assess exposure distribution.

The range of frequencies, expressed in kilohertz (kHz), over which a device can process or display horizontal signals or scan lines. It indicates the minimum and maximum operating frequencies for horizontal scanning operations.

Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.

Una lista que enumera las operaciones básicas de edición de imágenes disponibles en el producto, como recorte, redimensionado y rotación. Cada valor representa una función individual que el usuario puede aplicar a una foto o vídeo.

A list of the file extensions and codecs that a product can read, display, or record. Each value represents a valid format such as JPG, PNG, BMP, GIF, HEIF, WebP, RAW, etc., and may include both the extension and the associated codec name.

The diagonal measurement of the image sensor in a camera or imaging device, expressed in inches or millimeters. It indicates the overall active area available for capturing light and is commonly used to compare sensor sizes such as 1/2.3", 1/1.7", APS‑C, Full‑Frame, etc.

Indicates whether the device includes an image stabilization system, either optical or electronic, that reduces camera shake to produce sharper photos and smoother video recordings.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

Indicates whether a USB cable is supplied with the product. A value of "Yes" means that a USB cable is included in the package, while "No" indicates it is not provided.

The specific version of Intel Extreme Memory Profile (XMP) supported by the memory module or system, indicating the profile level that can be used to set memory timings and speeds for optimal performance.

Indicates whether the product supports Intel’s Extreme Memory Profile (XMP), a technology that allows users to apply pre‑defined memory timings and frequencies for optimal performance.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The ISO sensitivity setting of a camera, indicating the sensor’s sensitivity to light. Values are typically numeric (e.g., 100, 200, 400) and may include an "Auto" option where the camera selects the appropriate ISO automatically.

The outer jacket material is the substance that forms the protective sheath or covering of a product, such as cables, hoses, or enclosures. It determines durability, fire‑resistance, and suitability for specific environments. Common materials include PVC, LSZH, TPE, nylon, ABS, and their combinations.

The electrical power rating of a lamp or light source, expressed in watts (W). It indicates the amount of energy the lamp consumes during operation or the maximum output it can deliver to connected devices.

A list of natural languages in which the product’s content, user interface, subtitles, or documentation is available for users to select and consume.

A list of natural languages in which a product is available or supported, including user interface, documentation, and audio options.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The aspect ratio describes the proportional relationship between the width and height of a lens’s image circle or sensor coverage, expressed as a simple fraction (e.g., 12/9). It indicates how wide or tall the captured image will be relative to its other dimension. This value helps users compare lenses for compatibility with camera sensors and desired framing.

The set of camera settings that determine how the sensor is exposed to light. Common values include Auto, Aperture priority, Shutter priority, Manual and combinations thereof. Each value represents a selectable mode that controls shutter speed, aperture, ISO or a combination of these parameters.

The method used by a camera to determine the appropriate exposure settings based on the scene’s lighting conditions. Common modes include Centre‑weighted, Spot, Evaluative (Multi‑pattern), and Highlight‑weighted. The value is typically a single mode or a comma‑separated list of modes that can be applied simultaneously.

The type of illumination used by the product’s display or projection system, such as lamp, LED, laser, or a hybrid combination. It indicates the underlying light‑emitting technology that determines brightness, color accuracy, lifespan and power consumption.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The material indicates the type of substance from which a product is made, such as metal, plastic, wood, glass, or composite materials. It helps users understand the product’s durability, weight, appearance, and suitability for specific applications.

The technology used to generate the image in a projector, such as DMD (Digital Micromirror Device), MLA (Microlens Array) or LCD panels. It indicates how light is modulated and reflected to produce the displayed picture.

The highest f‑number (aperture value) that a camera lens can achieve when fully wide open. It indicates the maximum light‑gathering capability of the lens and is expressed as an integer or decimal without units.

The longest focal distance that a lens or optical system can achieve, expressed with a length unit such as millimetres (mm), centimetres (cm) or inches (in). It indicates the maximum field‑of‑view angle and zoom capability of the device.

The highest pixel dimensions of an image or display that a product can output, capture, or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for visual content on the device.

The highest pixel dimensions that a device can output or support for video playback or recording, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for visual content on the product.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The total number of individual memory sticks that make up a memory kit or are installed in a device, expressed as an integer count.

The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.

The pixel dimensions that a device must support to meet its minimum visual performance requirements, expressed as width by height (e.g., 1024x768). It indicates the lowest resolution needed for proper operation or compatibility with software and content.

The shortest focal distance that a lens or optical system can focus on, expressed with a length unit such as millimetres (mm), centimetres (cm) or inches (in). It indicates the widest field‑of‑view angle and is useful for understanding the camera’s ability to capture wide scenes.

The lowest operating frequency of a processor, expressed in hertz (Hz). It indicates the minimum clock speed at which the CPU can run and is useful for comparing baseline performance across devices.

The smallest amount of internal or built‑in storage that a product requires to operate, typically expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand the minimum space needed for the operating system, essential applications, and basic usage.

The number of frames captured per second by a Motion JPEG video stream, expressed in frames per second (fps). This value indicates the smoothness and temporal resolution of the recorded motion, with higher rates providing more fluid playback.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

Indicates whether the product supports Near‑Field Communication (NFC), a short‑range wireless technology that allows data exchange between devices when they are in close proximity.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.

The total count of distinct colours that a display can render, typically expressed in millions or billions. This figure reflects the colour depth and determines how smoothly gradients and subtle hues are reproduced on the screen.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.

Indicates whether the product is equipped with an orientation sensor, a device that detects its position relative to gravity or the Earth's magnetic field. A value of "Yes" means the sensor is present; "No" means it is absent.

The overall width and height of a screen or display measured in the same unit, typically centimeters or inches. It represents the physical size of the visual area that can be seen by the user and is useful for comparing monitors, projectors, TVs, and other display devices.

Indicates whether a product has an audio input port that can receive external sound signals, such as a headphone jack, RCA connector or optical cable. The value is "Yes" if the device includes at least one such input and "No" otherwise.

Indicates whether the product provides an audio output connection that can be used with a PC or similar device. The value is "Yes" if such an output port (e.g., 3.5 mm jack, RCA, optical) is present and "No" otherwise.

A list of photographic effects that can be applied to images, such as black‑and‑white, sepia, vivid, or other stylistic filters. Each value represents a distinct effect that may be available in the product’s software or hardware.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.

The electrical power drawn by a device while it is writing data to storage or memory, expressed in watts (W). This value represents the peak energy usage during write operations and can be used to assess performance and efficiency of storage devices.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The minimum and maximum distances, expressed in metres, at which a projector can display an image on a screen while maintaining acceptable sharpness and brightness. The value is represented as a range (e.g., "1.2 - 10 m"). This attribute helps users determine whether the projector will fit their room size.

The optical method used by a projector to create an image, such as DLP, LCD, LED or 3LCD. It indicates the underlying light‑processing system that determines brightness, color accuracy and overall visual performance.

The amount of light emitted by a projector, expressed in ANSI lumens. It indicates how bright the projected image will appear under typical viewing conditions and allows users to compare brightness levels across different projectors.

Indicates whether a quick‑installation guide is provided with the product. A value of "Yes" means that a brief, step‑by‑step manual or overview is included to help users set up the device quickly; "No" indicates that no such guide is supplied.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

The amount of memory that a device is advised to have for optimal performance. It represents the total RAM capacity, typically expressed in megabytes (MB) or gigabytes (GB), and indicates the minimum memory required for smooth operation of the product’s software and workloads.

Indicates whether the product has been refurbished, meaning it has undergone a quality inspection and repair process to restore it to a like-new condition before resale.

The number of megapixels captured by a camera’s sensor, expressed as a single numeric value (e.g., 12.3 MP). This metric indicates the overall detail and clarity that the camera can record in still images or video frames.

The pixel dimensions of a screen when captured or recorded, expressed as width by height (e.g., 1920x1080). It indicates the resolution that can be obtained from a device’s display during capture or recording sessions and is useful for comparing visual quality across devices.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

A set of predefined camera settings that automatically adjust exposure, white balance, focus and other parameters to suit specific shooting situations such as portrait, landscape, night or sports. Each value represents a selectable mode that the user can choose from when capturing images.

The diagonal measurement ranges of screens that the product can project or display, expressed in millimeters and/or inches. It indicates the minimum and maximum screen sizes that the device is designed to handle.

Indicates whether the product comes with the necessary screws included in the package. A value of "Yes" means that screws are supplied, allowing the user to assemble or secure the item immediately after unpacking; a value of "No" means no screws are provided and must be purchased separately.

Indicates whether the device’s self‑timer function is available and can be activated by the user.

The type of serial communication interface supported by the product, such as RS‑232, RS‑485, RJ‑45, or SATA. It indicates which physical connectors and protocols are available for data exchange with other devices.

The total operating hours a light source can provide before it needs replacement, expressed in standard time units such as hours or days.

The total operating hours a lamp can provide before it needs replacement when running in an energy‑saving mode, expressed in units of time such as hours or days.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

The general classification of a software product, such as operating system, application suite, utility, driver, or license type. It indicates the primary purpose or function of the software and helps users quickly identify what kind of program they are purchasing.

The version identifier of the software component associated with a product. It may be expressed as a numeric revision (e.g., 9.1, 2016), an alphanumeric code (e.g., v6.00, 5.x), or a descriptive label. This attribute helps users determine compatibility, update requirements, and feature sets.

The electrical current drawn by a device when it first powers on, expressed in amperes (A). It represents the initial surge of current required to start the product and can help users assess power supply compatibility or identify potential overload risks.

The pixel dimensions of still images that the product can capture or display, expressed as width by height (e.g., 6000x4000). This value indicates the resolution capability for still photography.

Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.

The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The proportion between the width and height of a product’s display or image, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether the content is designed for widescreen, square, or other aspect ratios.

The physical height of a storage drive that the product can accommodate, expressed in millimetres (mm). This attribute indicates the maximum vertical dimension of hard drives or solid‑state drives that fit within the device’s enclosure or bay, helping users select compatible media.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The proportion between the distance from a projector to its screen and the width of the projected image, expressed as a simple ratio such as 2:1 or 1.5:1. It indicates how far the projector must be placed to achieve a desired screen size and is useful for planning installation space.

Represents how many TVI (Television Interface) connectors are present on the product. The value is a simple integer indicating the total count of TVI ports, regardless of version or configuration.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the device supports UASP (USB Attached SCSI Protocol), which allows faster data transfer over USB by reducing CPU overhead and improving performance for storage devices.

Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

The type(s) of USB connector(s) present on a device, such as Micro‑USB, USB Type‑C, USB Type‑A, or combinations thereof. This attribute indicates the physical ports that can be used for data transfer, charging, or peripheral connectivity.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

Indicates whether the product includes a built‑in LCD screen that can be tilted or rotated to provide an adjustable viewing angle. A value of "Yes" means the device has such a display; "No" means it does not.

The range of vertical scan frequencies that a display device can support, expressed in hertz (Hz). It indicates the minimum and maximum refresh rates at which the screen updates vertically, affecting visual smoothness and stability.

A list of video file formats that the product can play or record, including both the compression codec and the file extension. Each value represents a valid combination of technology and format supported by the device’s hardware or software.

Indicates whether the product has the capability to record video. A value of "Yes" means the device can capture video, while a value of "No" indicates that it cannot.

The pixel dimensions of a video image, expressed as width by height (e.g., 1920x1080). It indicates the resolution that a device can display or record.

The vertical measurement of the visible portion of a screen or display, expressed in a physical unit such as millimetres, centimetres or inches. It represents the height that can be seen by the user and is useful for comparing monitor sizes, projector screens and other visual devices.

The set of white‑balance settings available for a camera or imaging device. Each mode adjusts the color temperature and tint to compensate for different lighting conditions (e.g., Auto, Cloudy, Daylight, Flash, Tungsten). The attribute may contain a single value or a list of selectable modes.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

Indicates whether the product supports any form of optical or digital zoom, allowing the image or field of view to be magnified beyond its native resolution.