Kingston A2000 (SA2000M8/500G) SSD NVMe PCIe M.2 2280, 500 GB

The operating frequency of the alternating current supplied to an AC adapter, expressed in hertz (Hz). It indicates the mains frequency range that the charger can handle and ensures proper operation with the connected device.

The range of alternating current voltage that an AC adapter can accept, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the device, ensuring safe operation across different regions and power standards.

The electrical current supplied by an AC power adapter to a device, expressed in amperes (A). It indicates the maximum output current that the adapter can provide under normal operating conditions and helps users verify compatibility with devices or accessories that require a specific input current.

The electrical potential difference supplied by the AC adapter to a device, expressed in volts (V). It indicates the nominal voltage that the charger outputs and is used to match the adapter with compatible equipment.

The classification of an antenna used in a device, indicating its physical configuration or mounting style such as external, internal, integrated, directional, omnidirectional, or multi‑antenna setups (e.g., "2x2", "4 x External"). It helps buyers understand how the antenna is attached and what signal coverage it may provide.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

The total number of cuts a printer’s autocutter can perform before it is expected to fail or require maintenance. This metric indicates the durability and longevity of the autocutter mechanism under normal operating conditions.

The count of individual electrochemical cells that make up a battery pack. This number indicates how many separate cells are connected in series or parallel to provide the required voltage and capacity for the device.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The mass of a battery expressed in a standard unit such as grams or kilograms. It indicates how heavy the battery is and can be used for shipping calculations, handling instructions, or consumer information.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

The amount of data that a device can temporarily store in its internal memory before processing or transferring it. The value is expressed with a digital capacity unit (e.g., kilobytes, megabytes). This attribute helps understand the performance and efficiency of hardware when handling information streams.

Indicates whether the product includes a built‑in stereo microphone, i.e., a single integrated microphone that captures sound from two channels for higher audio fidelity. A value of "Yes" means such a microphone is present; "No" indicates it is absent.

A list of software applications, operating systems, drivers, or utilities that are pre-installed or bundled with the product. The values may include antivirus suites, productivity tools, device management utilities, and other essential software components.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The number of clock cycles that a memory module takes to complete a read operation after the address has been sent. It indicates how quickly data can be accessed from RAM and affects overall system performance, especially in high‑speed memory configurations.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The physical connector used to charge the device, such as USB Type‑C, DC‑in jack, Micro‑USB, or proprietary connectors. It indicates the type of port that supplies power to the product and helps users identify compatible chargers or accessories.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The number of text columns that can be printed or displayed on a line for a given paper width or display size, expressed as two numbers separated by a slash (e.g., "56 / 42"). This attribute helps users understand how many characters or items fit per line under different conditions.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The maximum electrical power that a device can consume or supply when its thermal design power is configured to a lower setting, expressed in watts (W). This value indicates the energy capacity of the product under reduced operating conditions and helps users compare efficiency, size power supplies, and estimate operational costs.

The operating frequency of a processor when the system reduces power consumption to improve energy efficiency, expressed in hertz (Hz). It indicates the minimum guaranteed clock speed that the CPU can run at during low‑power modes and helps users understand how the device balances performance with battery life or thermal limits.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port used to connect a device to another component or system, such as USB, HDMI, RJ‑45, 3.5 mm jack, or fiber optic connectors. It indicates the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The model or designation of a hardware controller component, such as a network interface card, storage controller, or other embedded controller. It identifies the specific product line or series used in the device and helps users determine compatibility, performance characteristics, and support options.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

List of physical or logical interfaces that a device can use to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, and similar technologies. Each value represents an interface standard supported by the device.

Indicates whether the product includes a dedicated graphics adapter (discrete GPU) separate from any integrated graphics. A value of "Yes" means a discrete GPU is present, while "No" indicates only integrated graphics are available.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

A free‑text list of hazardous chemicals that may be present in the product, such as heavy metals, flame retardants or other regulated substances. The value is a comma‑separated string of chemical names or identifiers.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

Indicates whether the device includes a built‑in fingerprint reader for biometric authentication. A value of "Yes" means the device has a functional fingerprint reader; "No" indicates it does not.

Indicates whether the product is equipped with a front-facing camera. The value can be "Yes" or "No", representing the presence or absence of this camera.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

Indicates whether the device includes a dedicated hardware-based encryption feature that protects data integrity and confidentiality through an embedded component.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

A list of the HDMI ports available on the product, each entry indicating the number of ports and their specific HDMI version or additional features (e.g., "2 x HDMI 2.0b", "1 x HDMI 1.4 with CEC"). This attribute helps users understand both the quantity and capabilities of the HDMI connections.

The specific version of the HDMI standard that a product supports, such as "2.0", "2.1" or "1.4b". This value indicates the capabilities and compatibility of the HDMI interfaces on the device.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The vertical dimension of a product measured from its lowest to highest point at the rear side. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the rear height is relevant, including electronics, furniture, appliances and other objects.

Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Clear Video HD technology, a hardware feature that enhances video playback and capture quality by providing smoother motion, reduced artifacts, and improved color accuracy.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product incorporates Intel Software Guard Extensions (SGX), a hardware feature that provides isolated execution environments for secure code and data protection.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

Indicates whether the product supports Intel’s virtualization technology, which enables efficient execution of virtual machines by providing hardware‑assisted features such as VT‑x and VT‑d for CPU instruction set extensions.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

Indicates whether the product conforms to the JEDEC standard for semiconductor devices and components. A value of Yes means the item meets the specifications defined by JEDEC, ensuring compatibility and reliability in electronic systems; No indicates it does not meet those criteria.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The material or finish applied to the lead components of a product, such as gold, nickel, copper or other plated metals. It indicates the type of metal coating used for corrosion resistance, conductivity and durability in electronic leads.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The maximum amount of dedicated video memory that the integrated graphics adapter built into a device can provide, expressed as a data size (e.g., megabytes or gigabytes). This value indicates how much graphical processing power is available for rendering, gaming, and other GPU‑intensive tasks.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The highest number of times per second that a display can update its image, expressed in hertz (Hz). It indicates the maximum refresh capability of the device and is useful for comparing visual performance across monitors, TVs, laptops, and other screen‑based products.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The physical configuration or size classification of a memory module, such as SO‑DIMM, UDIMM, RDIMM, or on‑board. It indicates the form factor that determines compatibility with motherboards and other hardware components.

The classification of a device’s memory technology, such as DDR4 SDRAM, GDDR6, or MLC NAND. It indicates the underlying architecture and generation that determines performance characteristics like bandwidth, latency, and power consumption.

The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.

Indicates how many microphone input connectors are available on the product. The value is a simple integer representing the total count of MIC ports, regardless of type or version.

Indicates whether a device can connect to the Internet using a cellular network such as 3G, 4G, LTE or 5G. A value of "Yes" means the product has the necessary hardware and software to access mobile data; "No" indicates that this capability is not present.

Specifies the capacity of each memory module in megabytes (MB) and its data bus width in bits. The value is expressed as a pair separated by an "x", for example "1024M x 64" indicates a 1 GB module with a 64‑bit wide interface.

The type of NAND flash memory cells used in a storage device, such as Single Level Cell (SLC), Multi‑Level Cell (MLC), Triple‑Level Cell (TLC) or Enterprise MLC (eMLC). It indicates how many bits are stored per cell and influences performance, endurance and cost.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.

Indicates whether the product includes a numeric keypad area on its keyboard, typically found in full-size or laptop keyboards with an integrated numeric section.

Indicates whether the product includes an NVMe (NVM Express) interface for high‑speed solid state storage.

The version of the NVMe (Non-Volatile Memory Express) specification that a storage device implements. It indicates the protocol features, performance capabilities, and compatibility with host systems. Values are typically numeric (e.g., 1.3, 2.0) and may include minor revisions or letters (e.g., 1.4a).

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

The clock speed at which the integrated graphics processor runs under normal conditions, expressed in hertz (Hz). It indicates how many cycles per second the GPU performs and is useful for comparing visual performance across devices that use an on‑board graphics solution.

The version number of the DirectX graphics API supported by a device, indicating its compatibility with graphical features and software that rely on specific DirectX releases.

The operating speed at which the integrated graphics processor in a device runs, expressed in hertz (Hz). It indicates how many cycles per second the GPU can perform and is used to assess visual performance, power consumption, and compatibility with display refresh rates.

The unique identifier of the integrated graphics adapter built into a device, typically expressed as a hexadecimal string such as "0x5916" or a numeric code like "1916". This value allows users and systems to distinguish between different GPU models and versions across laptops, desktops, and motherboards.

The specific version of the OpenGL graphics API supported by a device, indicating its rendering capabilities and compatibility with software that relies on this standard.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The architecture of the operating system installed on a device, indicating whether it is 32‑bit or 64‑bit (or other variants). This attribute helps users determine compatibility with hardware and software that requires a specific OS architecture.

A list of natural languages in which the operating system installed on a device is available or supported, allowing users to identify the language options for the OS interface and documentation.

The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.

The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.

The type of optical drive included in a device, such as DVD‑RW, DVD‑Writer, Blu‑Ray RW, or no optical drive. This attribute indicates whether the product can read or write optical media and specifies the particular model or capability when available.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The specific technology used to construct the display panel, such as IPS, TN, VA, OLED, or LCD. It indicates how pixels are controlled and affects image quality, color accuracy, viewing angles, and power consumption.

Indicates whether a product requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

The number of pixels per inch on a display, expressed as points‑per‑inch (ppi). This metric indicates how sharp and detailed the screen appears, allowing comparison across monitors, smartphones, tablets, and other pixelated devices.

Represents the physical dimensions of a single pixel on a display or imaging device, expressed as width and height in a length unit (e.g., millimeters). This attribute allows comparison of the physical resolution across screens, cameras, and other pixel‑based technologies.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The type of pointing device integrated into or used with the product, such as a touchpad, clickpad, trackpoint, or mouse. The value is a free‑text label that identifies the specific form factor or mechanism the user interacts with to move the cursor or select items.

The typical electrical power drawn by a device while it is in normal operation, expressed in watts (W). It represents the average energy consumption during use and can be used to estimate operating costs or compare efficiency across similar products.

The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

Represents the number of individual items or units that can be placed on a single pallet. This value indicates how many pieces, packages, or components are stored or shipped together on one pallet, helping users assess storage capacity and logistics planning.

The maximum number of input/output operations per second that a storage device can perform when reading data randomly. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The maximum number of input/output operations per second that a storage device can perform when writing data randomly with 4‑KB blocks. This metric indicates how quickly the device can handle small, non‑sequential write requests and is useful for evaluating performance in database or high‑transaction workloads.

The maximum rate at which a device can read data from storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can retrieve information for processing or transfer.

The interval required for a memory or display component to complete one full refresh of a row, expressed in units such as nanoseconds (ns). It indicates how quickly the device can update data within that row and is critical for performance-sensitive applications like high‑speed memory modules or graphics buffers.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.

The total count of physical serial connectors (e.g., RS‑232, RS‑485) available on the product. This value is an integer that indicates how many serial interfaces are present, regardless of their specific model or duplex mode.

The type of serial communication interface supported by the product, such as RS‑232, RS‑485, RJ‑45, or SATA. It indicates which physical connectors and protocols are available for data exchange with other devices.

Indicates whether the product supports Intel Smart Response Technology (or equivalent), a feature that uses flash memory as a cache to accelerate disk access and improve overall system performance.

Indicates whether the product includes a slot for inserting a smart card, allowing authentication or payment functions.

The sound intensity produced by a printer while it is in operation, expressed in decibels (dB). This value indicates how loud the device is during normal printing tasks and helps users assess suitability for quiet work environments.

List of physical or logical interfaces that a solid‑state drive can use to connect with other components, such as PCI Express (PCIe), Serial ATA (SATA), NVMe, U.2 or other standard connections.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

The type of storage medium used in the product, such as SSD, HDD, eMMC, Flash, or hybrid combinations. It indicates whether the device uses solid‑state, magnetic, or other forms of memory and helps users understand the underlying technology.

A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The maximum amount of power, expressed in watts (W), that a processor or other electronic component is designed to dissipate as heat under typical operating conditions. It represents the thermal load the cooling system must handle and is used by manufacturers and users to assess performance, energy consumption, and suitability for specific environments.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

Indicates whether the storage device supports the TRIM command, which allows an operating system to inform the drive which blocks of data are no longer considered in use and can be wiped internally. This feature improves performance and longevity on solid‑state drives by enabling efficient garbage collection.

Indicates whether the product includes a connector for a Trusted Platform Module (TPM). A positive value means the device has a physical port that can accept a TPM chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

Indicates whether the product supports USB Power Delivery (USB‑PD) and, if applicable, the maximum power it can deliver via a USB‑C port. A value of "Yes" means the device is capable of providing or receiving power through USB‑PD; a numeric value specifies the wattage limit (e.g., 90 W).

Indicates whether the product supports the USB‑Type C DisplayPort Alternate Mode, allowing a USB‑C port to transmit video signals via the DisplayPort protocol.

The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.