Kingston Technology FURY Impact memory module 4 GB 1 x 4 GB DDR3L SODIMM HyperX Impact 2133 MHz, Low-voltage (1.35V), CAS 10 - Memory

Specifies the electrical buffering and error‑checking characteristics of a memory bus or interface, such as whether it is unbuffered, registered (buffered), or non‑ECC buffered. This attribute indicates how data integrity and signal stability are handled on the bus.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The method or mechanism used to dissipate heat from a component such as a processor, graphics card, or other electronic part. It indicates whether the device relies on active cooling (fans or liquid pumps), passive heat sinks, or hybrid solutions, and helps users assess thermal performance and noise levels.

The standardized designation that identifies the data transfer rate of a memory module, such as "PC3-14900" or "PC4-25600". It indicates the maximum bandwidth the module can achieve and is used by manufacturers to specify performance levels across different DDR generations.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The amount of memory that a single module can store, expressed as a digital capacity such as megabytes (MB) or gigabytes (GB). It indicates the storage potential of individual RAM modules, flash drives, or other removable memory components and allows users to compare sizes across products.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The number of memory clock cycles required for a RAM module to respond to a read request after the CAS (Column Address Strobe) signal is asserted. It indicates the latency of accessing data in the memory and affects overall system performance, especially in memory‑intensive tasks.

The physical configuration or size classification of a memory module, such as SO‑DIMM, UDIMM, RDIMM, or on‑board. It indicates the form factor that determines compatibility with motherboards and other hardware components.

The total count of individual memory modules that are included together as a single product or kit. It indicates how many separate sticks are sold or shipped together, which can help customers understand the quantity they will receive and plan for installation or replacement.

The form or packaging of a memory module, such as DIMM, SO‑DIMM, USB flash drive, microSDHC, or other storage media. It indicates the physical format that determines compatibility with motherboards, devices, and accessories.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The temperature range in which a product can safely operate without risk of damage or performance degradation when it is not actively performing its primary function. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The vertical dimension of the inner case or packaging measured from its lowest to highest point, expressed in a physical unit such as millimetres, centimetres or inches. It applies to any product where the internal dimensions of the shipping or protective case are relevant.

The linear dimension of the inner case or enclosure of a product, measured in a standard unit such as meters, centimeters or inches. It represents the overall length of the internal space available for components or accessories and is useful for comparing sizes across similar items.

The horizontal dimension of a product’s inner case or enclosure, measured in a linear unit such as millimetres or inches. It indicates how wide the interior space is from one side to the other and is used for sizing, fitting, and compatibility purposes with components that must fit inside the case.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.