Kodak i3400 A4 Document Scanner

The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.

The set of colour options that a scanner can produce when scanning an image or document. Each value represents a supported mode such as "Grayscale", "Monochrome", or "Colour" and may be listed separately if multiple modes are available.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

A list of software programs and utilities that come pre-installed or bundled with the product, such as operating systems, drivers, antivirus suites, or other essential applications.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Indicates whether a scanner can perform color scans. The value is "Yes" if the device supports color scanning, and "No" if it only performs monochrome scans.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The visual technology used by the product’s screen, such as LCD, LED, OLED, TFT or analog. It indicates the underlying display panel that determines image quality, color reproduction and power consumption.

Indicates whether a device can scan both sides of a sheet in a single pass. A value of "Yes" means the scanner automatically captures the front and back of each page, while "No" indicates that only one side can be scanned at a time.

Indicates whether the device can scan photographic film or other similar media. The value is "Yes" if film scanning is supported, otherwise "No".

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The range of alternating current voltage that a charger or power supply can accept, expressed in volts (V). It specifies the minimum and maximum input voltages compatible with the device.

Indicates whether the product supports or is compatible with the Letter paper size (8.5" x 11"), commonly used in North America.

The main illumination source used by the product, such as LED, laser, CCFL, or other light-emitting technologies. It indicates whether the device uses a single light source or multiple sources and helps users understand the lighting characteristics of the item.

List of Linux operating systems that the product is compatible with, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height (e.g., 216 × 356 mm). This value indicates the maximum area the device can scan without needing to cut or stitch images.

The smallest amount of system memory required for a product to operate correctly, expressed in gigabytes or megabytes. This value indicates the minimum RAM capacity that a device must have to run its software and hardware components without performance degradation.

The pixel dimensions of a scanner’s optical sensor, expressed as width by height (e.g., 1200×2400). It indicates how many pixels can be captured per scan and determines the sharpness and detail of scanned images.

The number of distinct colours that a device’s output can represent, expressed as an integer followed by the unit "bit" (e.g., 24 bit). This metric indicates the richness and fidelity of colour reproduction for images or video sent to the device.

The type of interface or connector used to connect a PC or computer peripheral to another device or system. Typical values include USB, RS‑232, RJ‑45, and other common port types, optionally specifying version or variant (e.g., USB 2.0, USB 3.0). This attribute helps users identify the required cables or adapters for connectivity.

The type of electrical supply that powers the device, such as mains AC, DC, USB, battery, or a combination of these options.

A list of communication interfaces or software protocols that a scanner can use to transfer scanned images to a computer or network, such as TWAIN, WIA, SANE, ICA, ISIS, and others. Each entry represents an available option for connecting the device to capture software.

A list of file extensions that a scanner can produce or accept when digitizing documents, such as JPG, PDF, TIFF, BMP, PNG, RTF, CSV, HTML, OCR, XPS, TXT and XLS. The values are comma‑separated strings representing each supported format.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

The sound intensity produced by a device while it is performing scanning operations, expressed in decibels (dB). This value helps users assess how quiet the scanner will be during normal use and compare noise levels across models.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

Ein Touchscreen ist eine berührungsempfindliche Anzeige, die Eingaben über Berührungen erkennt. Er kann als primäre oder sekundäre Eingabemethode dienen und ist in vielen Geräten wie Laptops, Tablets und Smartphones üblich. Der Wert gibt an, ob das Gerät über einen Touchscreen verfügt (Ja) oder nicht (Nein).

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.