M.2 256GB SSD Intel 545S

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the drive can store and compare different drives across products.

Indicates whether a product provides comprehensive protection for data throughout its entire lifecycle, from creation and storage to transmission and deletion. A value of Yes means the device or system implements mechanisms such as encryption, secure key management, and integrity checks that cover all stages of data handling.

Indicates whether the product incorporates a technology that protects against power loss by preserving data integrity during unexpected shutdowns or power interruptions.

Indicates whether the device includes a dedicated hardware-based encryption feature that protects data integrity and confidentiality through an embedded component.

Indicates whether the product incorporates Intel’s High Endurance Technology (HET), a feature that enhances the durability and lifespan of storage devices by optimizing wear‑leveling, error correction, and firmware management. A value of "Yes" means the device supports HET; "No" indicates it does not.

The specific version of Intel Smart Response Technology supported by the product, indicating its capability to accelerate disk performance using cache memory. The value is typically a decimal number such as 1.00 or 0.00 that represents the feature level enabled on the device.

List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

The highest temperature at which a product can operate safely without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C). This attribute helps users verify that the device will remain within its thermal limits during normal use.

The classification of a device’s memory technology, such as DDR4 SDRAM, GDDR6, or MLC NAND. It indicates the underlying architecture and generation that determines performance characteristics like bandwidth, latency, and power consumption.

The type of NAND flash memory cells used in a storage device, such as Single Level Cell (SLC), Multi‑Level Cell (MLC), Triple‑Level Cell (TLC) or Enterprise MLC (eMLC). It indicates how many bits are stored per cell and influences performance, endurance and cost.

The typical electrical power drawn by a device while it is in normal operation, expressed in watts (W). It represents the average energy consumption during use and can be used to estimate operating costs or compare efficiency across similar products.

The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.

The maximum clock frequency at which a processor operates, expressed in megahertz (MHz) or gigahertz (GHz). This value indicates the speed of the CPU and allows users to compare performance across different models.

The time delay between a read request and the delivery of data from a storage device or memory component, expressed as a duration in milliseconds (ms), microseconds (µs) or seconds (s). It indicates how quickly the device can retrieve information for processing or transfer.

The maximum rate at which a device can read data from storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can retrieve information for processing or transfer.

The maximum rate at which a storage device can write data in a continuous stream, expressed as a data transfer rate such as megabytes per second (MB/s) or gigabits per second (Gbps). This value indicates how quickly the device can persist large files or perform bulk writes and is useful for comparing performance across similar products.

Identificador único asignado a cada unidad de estado sólido (SSD) por el fabricante para su trazabilidad y referencia interna. Se utiliza en catálogos, inventarios y soporte técnico.

Represents the physical form factor of a solid‑state drive, indicating its size and connector type (e.g., M.2, 2.5", 3.5"). This attribute helps users identify compatibility with motherboards, enclosures, or laptops.

Indicates whether a solid‑state drive (SSD) includes built‑in temperature monitoring capability. A value of "Yes" means the SSD can report its operating temperature to the host system or firmware, while "No" indicates no such feature is present.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.