Microconnect 1.8m Type M Power Extension Cord - Black

The operating frequency of the alternating current supplied to an AC adapter, expressed in hertz (Hz). It indicates the mains frequency range that the charger can handle and ensures proper operation with the connected device.

The range of alternating current voltage that an AC adapter can accept, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the device, ensuring safe operation across different regions and power standards.

Indicates whether the device has an automatic focusing system that adjusts the lens or sensor focus without user intervention.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The classification of the mechanical bearing used in a product, such as ball, sleeve, fluid dynamic, hydraulic, magnetic levitation or other specialized types. It indicates the internal design that determines load capacity, noise level and durability.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.

Specifies the type of interface or mechanism used to secure a cable in its port, such as Kensington, Noble, IBM, or other standard lock slots. This attribute helps users identify compatibility and security features of the device.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

The category or technology of a cable, such as Cat5e, Cat6, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

The yield rating of a printer cartridge, indicating the approximate number of pages or units it can produce before replacement is needed. Common ratings include "Standard Yield", "High (XL) Yield", and "Extra (Super) High Yield".

The number of clock cycles that a memory module takes to complete a read operation after the address has been sent. It indicates how quickly data can be accessed from RAM and affects overall system performance, especially in high‑speed memory configurations.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

A colour is a visual attribute that describes the hue or shade of an object or surface. It can be a single dominant colour, a combination of colours, or a range such as "Black, White". The value may be expressed in common names (e.g., Black, Silver) or descriptive terms (e.g., One Colour, Assorted).

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The material or construction style of the cable’s conductors, such as stranded copper, solid copper, or other conductive materials. It indicates how the individual wires are arranged and what material they are made of, which affects flexibility, durability, and signal integrity.

The operating frequency of a processor when the system reduces power consumption to improve energy efficiency, expressed in hertz (Hz). It indicates the minimum guaranteed clock speed that the CPU can run at during low‑power modes and helps users understand how the device balances performance with battery life or thermal limits.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

The physical interface or port used to connect a device to another component, such as USB, HDMI, RJ‑45, audio jacks, or fiber optic connectors. It identifies the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The physical configuration or design of a connector that uses the second form factor standard (e.g., USB‑C, HDMI‑Type B). It indicates how the connector is shaped and mounted on devices, helping users determine compatibility with cables, adapters, and equipment.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The physical interface or port used to connect a device to another component or system, such as USB, HDMI, RJ‑45, 3.5 mm jack, or fiber optic connectors. It indicates the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The general classification of a product, such as tablet, smartphone, router, or computer. It indicates the primary function or form factor that helps buyers quickly identify and compare similar items.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of display panel used in a visual device, such as LED‑backlit LCD, IPS, TN, VA, OLED, or AMOLED. It indicates the underlying technology that determines image quality, color accuracy, viewing angles, response time and power consumption.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

Represents the count of independent execution units within a processor or similar component. The value is an integer without any unit of measure, indicating how many discrete execution cores or threads are available for parallel processing.

The physical interface used to connect a fan to a power or control source, such as 3‑pin, 4‑pin PWM, Molex, or other proprietary connectors. This value indicates the shape and pin configuration of the fan’s plug so that compatible power supplies, fans, or controllers can be selected.

The linear measurement across the widest part of a fan, expressed in units such as millimeters (mm), centimeters (cm) or inches (in). It represents the overall width of the fan and is useful for determining fit, compatibility with cases, and airflow characteristics.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The operating frequency of a device or component, expressed in hertz (Hz). It represents the number of cycles per second that the product’s internal circuits or wireless radios can run and is useful for comparing performance across similar products.

Indicates whether the product is equipped with a front-facing camera. The value can be "Yes" or "No", representing the presence or absence of this camera.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

The specific model or designation of the graphics adapter present in a device, such as "Intel HD Graphics", "AMD Radeon Vega 8", or "NVIDIA GeForce GTX 1660". This value helps users understand the visual performance and capabilities that the product can deliver.

The brand or family of the graphics adapter present in a device, such as Intel, AMD, NVIDIA, Apple, or other vendors. It indicates the general source of the GPU technology and helps users compare visual performance across products.

Indicates whether the product contains any halogen compounds. A value of "Yes" means the item is free of halogens, making it safer for indoor use and more environmentally friendly.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

A list of the HDMI ports available on the product, each entry indicating the number of ports and their specific HDMI version or additional features (e.g., "2 x HDMI 2.0b", "1 x HDMI 1.4 with CEC"). This attribute helps users understand both the quantity and capabilities of the HDMI connections.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

The hue or combination of hues emitted by a light source, expressed as common colour names such as "Red", "Green", "Blue" or comma‑separated lists like "Red, Green, Blue". This attribute indicates the perceived colour of the illumination produced by devices such as LEDs, lamps, or other lighting fixtures.

Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Clear Video HD technology, a hardware feature that enhances video playback and capture quality by providing smoother motion, reduced artifacts, and improved color accuracy.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product incorporates Intel Software Guard Extensions (SGX), a hardware feature that provides isolated execution environments for secure code and data protection.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

Indicates whether the product supports Intel’s virtualization technology, which enables efficient execution of virtual machines by providing hardware‑assisted features such as VT‑x and VT‑d for CPU instruction set extensions.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The total amount of digital storage available inside a device for holding files, applications and other data. It is expressed as a numeric value with an appropriate unit such as GB, MB or TB, allowing users to compare how much information the device can store.

The outer jacket material is the substance that forms the protective sheath or covering of a product, such as cables, hoses, or enclosures. It determines durability, fire‑resistance, and suitability for specific environments. Common materials include PVC, LSZH, TPE, nylon, ABS, and their combinations.

The highest static pressure that a product, such as a fan or cooling component, can generate or withstand, expressed in units of water column height (e.g., millimetres of water). This value indicates the maximum air‑pressure capability and helps users compare performance across similar devices.

The highest speed at which a rotating component—such as a fan motor or spindle—can turn, expressed in revolutions per minute (RPM). This value indicates how fast the device operates and is useful for comparing performance or suitability across models.

The highest mass that a product or component can safely support, expressed in a standard unit such as kilograms or pounds. This value is used to determine load limits for mounting, transportation, and handling.

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

Indicates how many microphone input connectors are available on the product. The value is a simple integer representing the total count of MIC ports, regardless of type or version.

Indicates whether a device can connect to the Internet using a cellular network such as 3G, 4G, LTE or 5G. A value of "Yes" means the product has the necessary hardware and software to access mobile data; "No" indicates that this capability is not present.

Indicates whether a product includes a mounting kit that allows it to be securely attached to a wall, rack, or other support structure. The value is typically "Yes" if the kit is included, or "No" if it is not.

The total count of individual blades that make up a fan’s rotating assembly. This value is an integer indicating how many separate blades are present, which can affect airflow characteristics, noise level, and overall performance.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The architecture of the operating system installed on a device, indicating whether it is 32‑bit or 64‑bit (or other variants). This attribute helps users determine compatibility with hardware and software that requires a specific OS architecture.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

The primary software platform that the product runs on, such as Android, iOS, Windows, macOS, or Linux. It indicates which operating system is required for installation or operation and helps users identify compatibility with their devices.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

The type of rear camera configuration on a device, such as single, dual, triple or quad cameras. It indicates how many lenses are mounted at the back and can help users understand the photographic capabilities.

The linear distance that a ribbon covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the ribbon for printing or labeling purposes.

The overall dimensions of a ribbon or tape, expressed as a width and a length with appropriate units (e.g., millimeters for width and meters for length). It indicates the physical size that determines compatibility with printers, cutters, or other equipment.

Indicates whether the product comes with the necessary screws included in the package. A value of "Yes" means that screws are supplied, allowing the user to assemble or secure the item immediately after unpacking; a value of "No" means no screws are provided and must be purchased separately.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

List of physical or logical interfaces that a solid‑state drive can use to connect with other components, such as PCI Express (PCIe), Serial ATA (SATA), NVMe, U.2 or other standard connections.

The type of storage medium used in the product, such as SSD, HDD, eMMC, Flash, or hybrid combinations. It indicates whether the device uses solid‑state, magnetic, or other forms of memory and helps users understand the underlying technology.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates the types of products, users or environments for which the item is intended or compatible. The value can be a single category such as "Gaming" or a specific product type like "Computer case".

The form in which a product is packaged or delivered, such as single unit, multi‑pack, combo pack, or other bundled configurations.

A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The technology used by a device’s touch-sensitive display, such as capacitive, resistive, infrared, or optical. It indicates how the screen detects user input and can affect sensitivity, durability, and power consumption.

Indicates whether the product includes a connector for a Trusted Platform Module (TPM). A positive value means the device has a physical port that can accept a TPM chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.