OKI C824dn A3 Colour Laser Printer 8OK47228003

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The linear dimension of the media that a device can handle, expressed as a range in millimetres (mm). It represents the minimum and maximum size of paper or other media supported by the product.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

A list of envelope sizes that a product can accept, expressed with standard codes or names (e.g., "DL", "C5", "10"), optionally combined in comma‑separated groups to indicate compatible envelopes.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The total amount of digital storage available inside a device for holding files, applications and other data. It is expressed as a numeric value with an appropriate unit such as GB, MB or TB, allowing users to compare how much information the device can store.

The largest standard ISO B-series paper format that a device can handle, expressed as an ISO code (e.g., "B0", "B1", …, "B5"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The maximum number of pages a printer, copier or fax machine is designed to handle in a typical month of operation. It indicates the expected workload capacity and helps users compare how heavily different models can be used before reaching their limits.

The maximum number of sheets or pages that a printer, copier, or fax machine can accept in a single feeding cycle. It indicates the largest input tray capacity and helps users understand how many pages can be processed automatically before needing to reload paper.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

A comma‑separated list of mobile printing services or protocols that a device can use to send print jobs from smartphones, tablets or other mobile devices. Typical values include Apple AirPrint, Google Cloud Print, Mopria Print Service and similar cloud‑based solutions.

The maximum number of paper sheets that a multi-purpose tray can hold for automatic feeding. This value indicates how many pages the device can process before needing to be reloaded, helping users compare throughput and convenience across models.

The maximum number of sheets a multi‑purpose input tray can hold in a single feeding cycle. This value indicates the paper capacity of the tray, helping users understand how many pages can be processed automatically before needing to refill or change the tray.

A list of paper or media types that a printer’s multipurpose tray can accept, such as envelopes, labels, plain paper, recycled paper, transparencies, and other compatible materials. The values are free‑text strings separated by commas, allowing users to see which materials the tray supports.

The weight of the paper or media that can be placed in a multipurpose tray, expressed as grams per square meter (g/m²). This value indicates how dense the material is and helps users compare the quality or thickness of different papers used in printers, copiers, and similar devices.

Indicates whether the product can connect to a network, either wired or wireless, and is capable of transmitting and receiving data over that connection.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A comma‑separated list of the network or data interface technologies that a product supports, such as Ethernet, Wireless LAN (Wi‑Fi), Serial (RS‑232/RS‑422), Parallel, Bluetooth, USB 2.0, NFC, Fiber, etc. The value may contain one or more interface names separated by commas.

A list of operating system names and versions that the product can run or support beyond its primary OS, including both commercial and open‑source distributions. Each value represents a distinct OS that is compatible with the hardware or software.

A list of natural languages in which the page descriptions or captions of a product are available. This attribute indicates the linguistic options for textual information that accompanies each page, such as titles, annotations, or metadata.

The type of paper input mechanism available in a printer or copier, such as a standard tray, cassette, sheet‑fed feeder, manual feed, or roll. It indicates how the device accepts and feeds paper for printing, scanning or copying.

A list of the paper or media types that a device’s input trays can accept, such as envelopes, labels, plain paper, recycled paper, and transparencies. Each value represents a material compatible with the printer or copier.

The weight of the paper or media measured in grams per square metre. It indicates how heavy a sheet of material is and can be used to compare paper density, estimate printing costs, or assess suitability for specific printing tasks.

The electrical power drawn by a device while it is in powersave mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The amount of electrical power a device uses during normal operation, expressed in watts (W). It represents the typical energy draw when the product is actively performing its intended functions and can be used to estimate operating costs or compare efficiency across similar devices.

The type of printing process or technology used by the product, such as laser, inkjet, thermal, LED, or other specialized methods.

The expected number of pages a printer, copier or fax machine is designed to produce in an average month under normal operating conditions. It indicates the workload capacity that the device can handle without overheating or failure.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The sound intensity produced by a printer while it is in operation, expressed in decibels (dB). This value indicates how loud the device is during normal printing tasks and helps users assess suitability for quiet work environments.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The duration from the moment a web request is made until the first black page is rendered on the screen, expressed in seconds or other standard time units. It indicates how quickly a user sees any visual content and helps assess initial page performance.

The maximum amount of material that can be fed into the device in a single operation, expressed as a numeric value followed by an appropriate unit such as sheets, pages or volume.

The total count of input trays or feeders available in a printer, copier, or multifunction device. It indicates how many separate compartments can automatically feed paper into the machine for printing, scanning, or copying tasks.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.