Patriot P300 M.2 NVMe Solid State Drive - 256GB

The maximum number of input/output operations per second that a storage device can perform when reading data in 4‑KB blocks. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

The physical form factor or dimension of a storage drive, expressed as a size in inches (e.g., "2.5"", "3.5""), an M.2 module designation (e.g., "M.2 2280"), or a memory card type (e.g., "SD Card", "microSDXC"). This attribute helps users determine compatibility with bays, enclosures, and devices that accept specific drive sizes.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

The electrical power drawn by a device while it is in standby mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

The total amount of data that can be stored on a solid‑state drive (SSD) installed in the product, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the device can hold and helps users compare storage options across products.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.