Ks tools | Tools

KS Tools. Special tool stee Ideally suited in e.g. fuel vacuum hoses, low pressure systems and water hoses - For removing of hose connections from hose tails

KS Tools. Grasping handle is hinged and locked with safety security catches without any tools - Firmly fixed grasping handle made from steel tube - Solid construction of steel sheet

KS Tools (4042146417980 / 150.0841)

KS Tools (4042146071540 / 911.5159)

KS Tools (4042146132289 / 918.1752)

KS Tools. The flat surface protects components - Ideally suitable for the dismantling and assembly of trims Door mouldings, door accessories etc

KS Tools (4042146214770 / 918.1275)

KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725

KS Tools (4042146426593 / 400.0900)

KS Tools (4042146331552 / 300.0577)

KS Tools (4042146157299 / 550.1290)

KS Tools (4042146307694 / 455.0005)

KS Tools 159.1045 ERGOTORQUEplus screwdriver for screws PZ.

KS Tools (4042146417867 / 150.0832)

KS Tools (4042146072462 / 151.8134)

KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - Interlocking mechanism against accidental loosening - Square drive adaptor to DIN 3120 / ISO 1174 with ball lock

KS Tools (4042146212509 / 140.2289)

KS Tools (4042146164242 / 300.0535)

KS Tools (4042146223802 / 140.5271)

KS Tools (4042146331378 / 300.0541)

KS Tools (4042146148990 / 150.9405)

KS Tools 300.0550 Digital Depth Callipers 0–25 m L-125 mm.

For inside and outside circlips Simply plier reconfigaration With rubber grip Interchangeable tips16 types of pliers by reversing the tips

In accordance to DIN 3117Insulated handle to DIN EN 609000Jaw 15 offset

FlankTraction profile (12 point) - In accordance to DIN 3110 / ISO 3318 - Straight form - Exact gearing with 72 teeth - Four different sizes on each spanner - Exact gearing with 72 teeth - With reverse lever - Jaw opening: 10 x 13 / 17 x 19 mm

6 point Internal square drive to DIN 3121 / ISO 1174Long execution For machinery usage Phosphate finish

With fiberglass handle - Forged execution - Impact area surfaces inductively hardened

For 3/16-inch1/4"5/16"+ 3/8"Clockwise and anticlockwise switch Special steel

KS Tools (4042146155820 / 310.0131)

KS Tools. Blades made out of hardened spring steel - Leaves individually marked with size - For the testing of intervals, contact distances, etc.

KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725-1

KS Tools. Measuring bar in mm and imperial divisions - For external, internal, step and depth measurements - With fixed adjusting screw and fine rolling adjustment

Short execution In accordance to DIN / ISO 2936Continuous hardened Phosphate finish

Open end side with innovative ratchet mechanism - FlankTraction Profile - In accordance to DIN 3113 / ISO 3318 - Jaw 15¡ offset - Straight form

KS Tools (4042146225646 / 150.1262)

KS Tools (4042146359068 / 911.1512)