SanDisk 256GB Cruzer Glide USB 2.0 Flash Drive - Black

Indicates whether a product includes a standard 3.5 mm audio connector, the common analog jack used for headphones, microphones and other audio devices.

Indicates whether the product has built‑in support for 3‑dimensional (3D) content or displays. A value of "Yes" means the device can render or display 3D images, videos, or games; a value of "No" means it does not have native 3D capability.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether a monitor or graphics card supports AMD’s Adaptive Sync technology, FreeSync. A value of "Yes" means the device is compatible; "No" means it does not support the feature.

The standard analog video signal format that a device can receive or transmit, such as NTSC, PAL, or SECAM. Each value represents one of the common broadcast standards used for television and video equipment.

The total amount of electrical energy a product consumes in one year, expressed in kilowatt‑hours (kWh). This figure represents the expected yearly operating cost and allows consumers to compare the long‑term efficiency of appliances or electronics.

Indicates whether the product can stream audio, video, or screen content to other devices using Apple’s AirPlay 2 protocol. A value of "Yes" means the device supports AirPlay 2; a value of "No" indicates it does not.

The proportion between the width and height of a display, image or video, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios.

A list of audio codecs and file formats that the product can play or output, such as AAC, MP3, FLAC, Dolby Digital, DTS, etc. Each value represents a supported combination of compression technology and file extension.

Indicates whether the product includes a dedicated audio input port (e.g., 3.5 mm jack, RCA, optical). A value of "Yes" means an audio input is present; "No" means it is absent.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

Indicates whether a television or receiver can automatically scan and store available broadcast channels without user intervention.

Indicates whether a device can lock itself automatically, typically when it is not in use or after a specified period of inactivity. A positive value means the product will engage its lock mechanism without user intervention; a negative value indicates manual locking is required.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

The count of individual electrochemical cells that make up a battery pack. This number indicates how many separate cells are connected in series or parallel to provide the required voltage and capacity for the device.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

Indicates whether the product includes a built‑in camera that can capture images or video directly, without requiring an external device. A value of "Yes" means the device has such a camera; "No" means it does not.

Indicates whether the product includes a built‑in hard drive that can be accessed directly without an external storage device. A value of "Yes" means the device has such a hard drive; a value of "No" means it does not.

Indicates whether the product includes built‑in speaker(s) that can produce sound without requiring external audio devices. A value of "Yes" means the device has one or more integrated speakers; a value of "No" means it does not.

A list of software applications, operating systems, drivers, or utilities that are pre-installed or bundled with the product. The values may include antivirus suites, productivity tools, device management utilities, and other essential software components.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear measurement across a circular or round cable, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the cable.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.

Specifies the type of interface or mechanism used to secure a cable in its port, such as Kensington, Noble, IBM, or other standard lock slots. This attribute helps users identify compatibility and security features of the device.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The duration that a camera’s shutter remains open to expose the sensor or film, expressed in seconds or fractions of a second (e.g., 1/2000 s). It determines how motion is captured and affects exposure; shorter times freeze action while longer times allow more light for low‑light situations.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The physical form factor of a computer chassis, indicating its size and layout such as Tower, Desktop, Mini‑PC, or rack units (e.g., 1U, 2U). This attribute helps users identify the footprint, mounting options, and compatibility with other hardware.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Indicates whether the product includes a Common Interface (CI) port, which allows connection to CI modules or other digital reception devices.

Indicates whether the product supports the Common Interface Plus (CI+) standard, a digital TV interface that allows the device to receive and decode broadcast signals from compatible set‑top boxes or satellite receivers.

The version number of the Common Interface Plus (CI+) standard supported by a product, indicating the feature set and compatibility with conditional‑access modules. The value is expressed as a numeric revision such as 1, 1.3, or 1.4.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

A list of product names that are known to work with or be supported by this item, such as models, series, or specific configurations. Each entry represents a distinct product that can be used interchangeably or in conjunction with the current product.

A list of regulatory, environmental, safety, and quality certifications that a product meets. Each entry may be a single certification (e.g., "RoHS", "CE") or a group of related certifications separated by commas (e.g., "CE, FCC, RoHS"). The attribute captures all applicable compliance marks for the item.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

Indicates the gender or sex classification of a connector, such as Male, Female, or Unspecified. This attribute helps users identify whether a cable or port is designed for insertion (Male) or reception (Female).

The physical interface or port used to connect a device to another component, such as USB, HDMI, RJ‑45, audio jacks, or fiber optic connectors. It identifies the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The physical position of a connector on a product, such as top left, bottom right, front panel, rear panel or internal mounting point. It indicates where the interface is situated relative to the device’s exterior or interior layout, helping users identify installation points and compatibility with cables or accessories.

The physical interface or port used to connect a device to another component or system, such as USB, HDMI, RJ‑45, 3.5 mm jack, or fiber optic connectors. It indicates the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The contrast ratio is the proportion between the brightest and darkest luminance a display can produce, expressed as a simple ratio such as 1000:1. It indicates how well a screen can differentiate light from dark areas, affecting image clarity and color depth.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

Indicates whether a device can automatically switch between day and night settings or operate in a fixed mode. The value may be "Yes" or "No", or specify the type of automatic mode such as "Auto/Colour/BW" or simply "Colour".

The electrical potential difference that a device delivers to its load when operating on direct current (DC). It is expressed in volts (V) and indicates the nominal voltage supplied by the product’s DC output, helping users verify compatibility with accessories or systems that require a specific DC supply.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether a product includes a detachable stand that can be removed or attached as needed. The value is expressed as a simple yes/no text, such as "Yes" or "No", and applies to items where a stand may be optional or removable, including monitors, furniture, appliances, and other equipment.

List of physical or logical interfaces that a device can use to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, and similar technologies. Each value represents an interface standard supported by the device.

The general classification of a product, such as tablet, smartphone, router, or computer. It indicates the primary function or form factor that helps buyers quickly identify and compare similar items.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

List of digital broadcast signal formats that the product can receive or transmit, such as DVB‑C, DVB‑S2, ATSC, ISDB‑T, and their variants. Each entry represents a distinct protocol or standard used for delivering audio/video content over cable, satellite, terrestrial, or other digital networks.

The total count of distinct colours that a display can render, typically expressed as a numeric value (e.g., 16.78 million). This attribute indicates the colour depth and richness of the visual output; higher numbers generally mean more accurate and vibrant images.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of display panel used in a visual device, such as LED‑backlit LCD, IPS, TN, VA, OLED, or AMOLED. It indicates the underlying technology that determines image quality, color accuracy, viewing angles, response time and power consumption.

The type of ear attachment used by a headset or earphones, indicating how the device fits around or inside the ear. Common values include "Intraaural", "Circumaural", "Supraaural" and "On‑ear". This attribute helps users choose a model that matches their preferred fit and comfort.

Indicates whether the product offers an energy‑saving or low‑power operating mode that reduces consumption during idle or normal use. The value is typically "Yes" if the feature is available and "No" otherwise.

The energy efficiency class indicates the relative energy performance of a product, expressed with letters ranging from A+++ (most efficient) to G (least efficient). It allows consumers to compare expected operating costs and environmental impact across similar items.

The energy efficiency class indicates the relative performance of a product, expressed with letters ranging from A+++ (most efficient) to G (least efficient). It allows consumers to compare expected operating costs and environmental impact across similar items.

The energy efficiency scale indicates the relative performance of a product, expressed with letters ranging from A+++ (most efficient) to G (least efficient). It allows consumers to compare expected operating costs and environmental impact across similar items.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.

Indicates whether an extended warranty can be purchased for the product in any of the supported countries.

The colour or combination of colours that the feet of a product are available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the feet for consumers.

Indicates whether the device includes a built‑in fingerprint reader for biometric authentication. A value of "Yes" means the device has a functional fingerprint reader; "No" indicates it does not.

Indicates whether the product incorporates a flicker‑free display technology that eliminates or reduces screen flickering, improving visual comfort and reducing eye strain.

The minimum and maximum focal lengths that a camera lens or optical system can cover, expressed in millimetres (mm). It indicates the zoom capability of the device and helps users understand the field‑of‑view range available.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

Indicates whether the product supports a dedicated game mode that optimizes performance or settings for gaming applications.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

Indicates whether a device supports HDCP (High‑bandwidth Digital Content Protection), allowing it to play or display protected digital content on compatible screens and audio/video equipment.

A list of the HDMI ports available on the product, each entry indicating the number of ports and their specific HDMI version or additional features (e.g., "2 x HDMI 2.0b", "1 x HDMI 1.4 with CEC"). This attribute helps users understand both the quantity and capabilities of the HDMI connections.

Indicates the types of headphone or earphone connections available on a product, such as wired jacks (e.g., 3.5 mm), USB‑C, Lightning, or wireless Bluetooth. The value may list one or more connection types separated by commas.

Indicates whether the product has a dedicated headphone output for connecting headphones or earphones. The value may be "Yes" or "No", or it can specify the type of connector such as "3.5 mm jack", "USB‑C", or other descriptive terms.

The general classification of a headset based on how it delivers audio to the user, such as binaural (two‑channel), monaural (single‑channel), or other configurations. This attribute helps buyers understand whether the device provides stereo sound, single‑speaker output, or specialized listening modes.

Indicates whether the product comes with a heatsink component for thermal management. A value of "Yes" means a heatsink is supplied, while "No" indicates it is not included and the user must obtain one separately.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The ability of a product to change its vertical dimension, typically measured in millimetres, centimetres or inches. It indicates whether the user can raise or lower the item and, if so, by how much. This attribute applies to monitors, desks, furniture, stands and other equipment that offer adjustable height.

Indicates whether a product can display or process high‑dynamic‑range content. A value of "Yes" means the device supports HDR formats and can render images with a wider contrast range, while "No" indicates it does not support HDR.

The level of contrast and color detail that a display or image can reproduce, indicating the ability to show darker shadows and brighter highlights with greater fidelity. It is typically expressed as a standard name such as HDR10, Dolby Vision, or DisplayHDR 400, and helps consumers compare visual performance across devices.

The range of frequencies, expressed in kilohertz (kHz), over which a device can process or display horizontal signals or scan lines. It indicates the minimum and maximum operating frequencies for horizontal scanning operations.

Indicates whether the product’s drive bays support hot‑swap, meaning drives can be inserted or removed while the device is powered on without shutting down or rebooting.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

A collection of settings that can be modified to improve the visual appearance of an image or video, such as brightness, contrast, saturation, sharpness and other similar controls. Each value represents a distinct adjustment option available on the product.

Indicates whether the product incorporates Intel’s Advanced Management Technology, a feature that enables remote monitoring and management of hardware components for improved reliability and maintenance.

Indicates whether the product incorporates Intel’s Build Assurance Technology, a feature that verifies firmware integrity and ensures secure boot processes during manufacturing and deployment.

Indicates whether the product incorporates Intel’s Efficient Power Technology, a feature that dynamically adjusts processor performance and power consumption to optimize energy efficiency while maintaining required performance levels.

Indicates whether the product supports Intel’s Fast Memory Access feature, which allows the processor to access system memory more quickly and efficiently for improved performance.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product includes Intel’s Intelligent Power Node Manager, a software component that monitors and optimizes power usage across connected devices.

Indicates whether the product includes Intel Node Manager, a management solution that provides remote monitoring, configuration and troubleshooting capabilities for Intel‑based systems.

Indicates whether the product incorporates Intel’s Quiet System Technology (QST), a feature that reduces fan noise and overall system acoustics by dynamically adjusting cooling performance based on workload.

Indicates whether the product supports Intel Rapid Storage Technology, a software and firmware solution that enables RAID configurations, improves storage performance, and provides data protection features for compatible drives.

Indicates whether the product includes Intel Rapid Storage Technology Enterprise, a feature that enables advanced RAID configurations and performance optimizations for storage devices.

Indicates whether the product includes a remote management module that allows administrators to monitor, configure, and troubleshoot the device over a network connection.

Indicates whether the product incorporates Intel’s Server Customization Technology, a feature that allows tailoring server hardware and firmware configurations to meet specific performance, security, or operational requirements.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

The specific model identifier of an Intel Xeon processor, such as E5‑2600 or E3‑1200. This value allows users to determine compatibility with motherboards, operating systems, and other hardware components.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

Indicates whether the product is capable of connecting to an online streaming service or platform to access video content over the Internet.

The general classification of a headphone or earbud product, such as earbuds, in‑ear monitors, or other intraaural styles. It indicates the form factor that determines how the device fits into or around the ear.

Indicates whether the device supports filtering network traffic based on IP addresses. When enabled, the device can allow or block communication for specific IP addresses or ranges.

Indicates whether the product includes a key ring attachment or accessory that allows keys to be attached for easy carrying.

Indicates whether a device includes an integrated numeric keypad area on its keyboard or input panel, allowing users to enter numbers directly without a separate numeric pad.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness, energy efficiency and color accuracy of the screen.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The specific kind of light-emitting diode technology used in the product, such as IR LED, RGB LED, COB LED, or addressable RGB LED. It indicates the emission characteristics and typical applications of the LED component.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

Indicates whether a product is compatible with Apple Mac computers or macOS operating systems. The value can be "Yes" if the device supports Macs, or "No" if it does not.

The target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The longest period a device can operate on a single charge before needing to be recharged, expressed in standard time units such as hours or minutes.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The largest capacity of a removable memory card that the device can support, expressed as a digital storage size (e.g., megabytes or gigabytes). It indicates the maximum amount of data that can be stored on an inserted card and is useful for comparing devices with different card slot capabilities.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The highest number of times per second that a display can update its image, expressed in hertz (Hz). It indicates the maximum refresh capability of the device and is useful for comparing visual performance across monitors, TVs, laptops, and other screen‑based products.

The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.

Indicates whether the device can mirror its display to another screen using wireless protocols such as Miracast, AirPlay or DLNA. A value of "Yes" means the hardware and software support is present; a value of "No" indicates that this feature is not available.

Specifies the capacity of each memory module in megabytes (MB) and its data bus width in bits. The value is expressed as a pair separated by an "x", for example "1024M x 64" indicates a 1 GB module with a 64‑bit wide interface.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

The proportion between the width and height of a screen or image, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios and helps users match devices to their media formats.

Indicates whether the product is capable of capturing images or video in low‑light or darkness using infrared illumination, thermal imaging, or other night‑vision technologies.

Indicates whether the product includes a feature that reduces or eliminates unwanted ambient noise, such as active noise cancellation or built‑in sound‑absorbing technology.

The percentage of the National Television System Committee (NTSC) color spectrum that a display or video device can reproduce, relative to the full NTSC standard. Values close to 100 % indicate that the product can render almost all colors defined by NTSC, providing accurate and vibrant visual output.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

The total count of physical SATA connectors available on the product. It indicates how many separate SATA ports are present, regardless of version or type, allowing users to assess storage expansion capacity.

The total number of individual users that can be supported or accessed by the product or service. It represents a count of distinct user accounts, connections, or licenses and is expressed as an integer value.

Indicates whether the product has a built‑in or integrated display that can be used to view content directly, such as on laptops, monitors, TVs, projectors, or other electronic devices.

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

Indicates whether the product includes an on/off switch that allows the user to power it on or off manually.

A list of functional controls or button combinations that can be used on a device, such as volume adjustment, mute, play/pause, call handling, and Bluetooth pairing. Each entry represents an individual key action or a multi‑key sequence that the user can trigger.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The type of optical drive included in a device, such as DVD‑RW, DVD‑Writer, Blu‑Ray RW, or no optical drive. This attribute indicates whether the product can read or write optical media and specifies the particular model or capability when available.

The physical dimensions of a camera’s image sensor, typically expressed as two measurements (width × height) with units in millimeters and inches. This attribute indicates the size of the sensor that captures light for each frame, influencing resolution, depth‑of‑field, and low‑light performance.

A list of operating system names and versions that the product can run or support beyond its primary OS, including both commercial and open‑source distributions. Each value represents a distinct OS that is compatible with the hardware or software.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The pair of horizontal and vertical dimensions in millimetres that a product supports for VESA mounting (e.g., "100 × 100 mm"). This value indicates the exact hole spacing required by a mounting bracket to secure the device. It is used for monitors, TVs, projectors and other display equipment that can be wall‑mounted or attached to stands.

The specific technology used to construct the display panel, such as IPS, TN, VA, OLED, or LCD. It indicates how pixels are controlled and affects image quality, color accuracy, viewing angles, and power consumption.

Indicates whether the product requires a Personal Identification Number (PIN) to access sensitive functions or the device itself, providing an additional layer of security against unauthorized use.

The maximum rotation angle a monitor or display can achieve around its vertical axis, expressed in degrees. It indicates the range of motion available for adjusting screen orientation to improve ergonomics and viewing comfort.

Represents the physical dimensions of a single pixel on a display or imaging device, expressed as width and height in a length unit (e.g., millimeters). This attribute allows comparison of the physical resolution across screens, cameras, and other pixel‑based technologies.

A list of the positions or mounting options where a product can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The electrical power consumption or output of the product, expressed in watts (W). It indicates how much energy the device uses during operation or how much power it can deliver to connected equipment.

The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

Indicates whether the video signal is transmitted in progressive mode, where each frame contains all lines of the image in sequence, as opposed to interlaced scanning. This attribute helps users determine if a display or camera supports true full‑frame refresh for smoother motion and higher quality playback.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

Indicates whether a product supports Quality of Service (QoS) features, which allow prioritization and management of network traffic to ensure optimal performance for critical applications.

Represents the number of individual items or units that can be placed on a single pallet. This value indicates how many pieces, packages, or components are stored or shipped together on one pallet, helping users assess storage capacity and logistics planning.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

Indicates whether a circuit board is designed to be mounted in a standard rack system. The value is typically "Yes" or "No", and may also include a measurement such as "1U" or "2U" to specify the height occupied by the board when installed in a rack.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

Indicates whether the product contains a battery. A value of true means the device has an internal or removable battery, while false indicates it does not.

A brief statement of the intended or most suitable use cases for a product, such as the type of environment (indoor, outdoor), activity (gaming, office work, music listening) or general application category. It helps customers quickly determine whether the item fits their needs.

Indicates whether the product includes a redundant power supply system that can provide backup power in case one unit fails, ensuring continuous operation.

The range of relative humidity (expressed as a percentage) within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates whether the device has a physical reset button that restores factory settings or original configuration when pressed.

The number of megapixels captured by a camera’s sensor, expressed as a single numeric value (e.g., 12.3 MP). This metric indicates the overall detail and clarity that the camera can record in still images or video frames.

The root‑mean‑square (RMS) power rating of a device, expressed in watts (W). It represents the average electrical power that the product can deliver or consume under normal operating conditions.

Indicates whether the product includes a sleep‑timer feature that allows users to schedule automatic start or stop actions at specified times while the device is in a low‑power or standby mode.

Indicates whether the product is a smart television that can connect to the internet and run applications or streaming services.

A list of the audio playback modes available on a device, such as AI Sound, Clear Voice III, Cinema, Music, Game, Standard, and other predefined sound profiles. Each value represents a selectable mode that determines how the device processes or enhances audio output.

The proportion of the standard sRGB color space that a display can reproduce, expressed as a percentage. Values close to 100 % indicate that the screen can render almost all colors defined by the sRGB standard, providing accurate and consistent visual output for images, videos, and design work.

Indicates whether the product comes with a stand or base included in the package. A value of "Yes" means a stand is supplied, while "No" indicates that no stand is provided and the user must obtain one separately.

A list of the physical sizes and types of storage drives that a product can accommodate, such as 2.5‑inch, 3.5‑inch, or M.2. The values are typically separated by commas and may include additional descriptors like "M.2" to indicate an internal solid‑state drive interface.

A list of the memory clock frequencies, expressed in megahertz (MHz), that a registered DIMM (RDIMM) can operate at. Each value represents an individual supported speed; multiple speeds are separated by commas. This attribute helps users determine which RDIMMs are compatible with a given motherboard or server.

List of physical or logical interfaces that allow an internal storage drive to communicate with the system, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

Indicates whether a product, such as a monitor or other device, can rotate around its vertical axis to adjust viewing angle. A value of "Yes" means the item supports swiveling; "No" means it does not.

The segment of consumers or businesses for whom the product is intended, such as Gaming, Content Creation, Cloud/Datacenter, Small and Medium Business, or Entry-level users. It helps shoppers quickly identify whether a product fits their needs and allows filtering by target audience.

Indicates whether a television or other broadcast device can display Teletext information—textual subtitles and program details transmitted alongside the TV signal. A value of "Yes" means the device supports this feature; "No" indicates it does not.

Indicates whether the product can be tilted or adjusted in angle to improve viewing comfort or ergonomics.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

Indicates whether the product includes a connector for a Trusted Platform Module (TPM). A positive value means the device has a physical port that can accept a TPM chip, enabling hardware‑based security features such as secure boot and encrypted storage.

Indicates the type of television tuner integrated into a device, such as analog, digital, or hybrid. This attribute helps users understand which broadcast signals the product can receive without external equipment.

Indicates whether a product includes an integrated television tuner that can receive broadcast signals directly without requiring an external receiver. The value is "Yes" or "No", representing the presence or absence of this feature.

Represents how many TVI (Television Interface) connectors are present on the product. The value is a simple integer indicating the total count of TVI ports, regardless of version or configuration.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

The specific USB standard version supported by the hub, expressed as a generation and revision (e.g., "3.2 Gen 1" or "3.0"). This indicates the maximum data transfer rate and compatibility with connected devices.

Indicates whether the product can record video or audio using a USB interface. A value of "Yes" means the device supports USB recording, while "No" indicates it does not.

The range of vertical scan frequencies that a display device can support, expressed in hertz (Hz). It indicates the minimum and maximum refresh rates at which the screen updates vertically, affecting visual smoothness and stability.

Indicates whether a product supports the VESA mounting standard, which defines the size and placement of mounting holes on displays or monitors. The value can be "Yes" or "No", or it may specify one or more VESA patterns such as "100 × 100 mm" to indicate the exact dimensions supported.

A list of video compression codecs that the product can encode or decode, such as H.264, H.265, VP9, M-JPEG, and others. Each value represents a codec that is natively supported by the device’s hardware or software.

Indicates whether a device or system can detect movement in its visual field and trigger an appropriate response, such as recording or alerting the user. The value is "Yes" if motion detection capability is present, otherwise "No".

The video signal standard indicates the type of digital or analog video format that a device can output, input, or support for playback and recording. Common examples include HDTV, SDTV, 4K UHD, and various component or composite standards. The value is expressed as a free‑text label such as "HDTV" or "1080p", representing the technical specification used by the hardware.

Indica el mecanismo o método con que se opera la función de ajuste de volumen en un producto, como botones físicos, controles giratorios, táctiles, digitales o combinaciones de estos. Los valores comunes incluyen "Tocar", "Botones", "Giratorio", "Control en línea" y otras variantes similares.

A textual description of the way a product is worn or fitted on the body, such as "headband", "earhook", "neck‑band", "over‑the‑ear", or "in‑ear". This attribute helps users understand how the item will be positioned and secured during use.

Indicates whether a product can withstand exposure to outdoor elements such as rain, wind, and temperature fluctuations without damage. The value is typically "Yes" or "No", but may also include descriptive terms like "Weatherproof" or "Weather‑resistant" that convey the same meaning.

Indicates whether the product includes an integrated web browser that allows direct access to the internet without external devices.

Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The ability of a camera or imaging device to capture detail across a broad range of light intensities, from very dark shadows to bright highlights. It indicates whether the sensor and processing pipeline can preserve information in both low‑light and high‑lux scenes, improving overall image quality.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

Indicates whether a product can be controlled by voice through the Amazon Alexa assistant and integrated with other smart devices.

Indicates whether a product can be controlled or interacted with using Google Assistant voice commands. A value of "Yes" means the device supports integration with Google Assistant, while a value of "No" indicates it does not.