Seagate IronWolf 6TB SATA HDD

Identifiers
MPN	Seagate ST6000VN001
Dimensions / Weight
Key Features
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.	4.16 ms
Buffer The amount of data that a device can temporarily store in its internal memory before processing or transferring it. The value is expressed with a digital capacity unit (e.g., kilobytes, megabytes). This attribute helps understand the performance and efficiency of hardware when handling information streams.	256 MB
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.	NAS
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.	147 mm
Device supported A list of device categories that the product is compatible with, such as Desktop Computer, Notebook, Network Camera, or Router. Each value represents a distinct type of hardware or system that can be supported by the product.	Storage System
Drive interface The physical or logical interface used by a hard drive to connect with other components, such as SATA, SAS, USB, or PCI Express. It indicates the technology that enables data transfer and power delivery between the device and its host system.	SATA
Drive interface standard	SATA/600
Drive type The classification of a storage device’s mechanical or solid‑state nature, such as Internal, External, Portable, Motorized, Manual, SSD, HDD, Blu‑ray Writer, etc. It indicates how the drive is mounted and operated within or outside a system.	Internal
Form factor Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.	3.5"
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.	6000 GB
HDD interface transfer rate The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.	6 Gbit/s
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.	7200 RPM
HDD sustained transfer rate The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.	216 MiB/s
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.	26.1 mm
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.	Serial ATA III
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.	250 G
Operating shock	40 G
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.	5 / 12 V
Power consumption (read)	11.27 W
Recording technology	Conventional Magnetic Recording (CMR)
Storage capacity The total amount of data that can be stored on the device, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much information the product can hold and compare storage options across different devices.	6291456 MB
Storage drive buffer size The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.	128 MB
Type The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.	HDD
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.	780 g
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	101.8 mm
Wireless LAN Indicates the wireless local area network (LAN) capabilities of a product, such as supported Wi‑Fi standards and features. The value is typically a textual description of the standard(s) or technology used.	No

Seagate is a brand of computer hard drives and storage solutions. The company produces a wide range of products for both personal and business use, including external hard drives, solid state drives, and storage systems. Seagate is one of the leading providers of storage solutions in the world, and its products are known for their quality and reliability.