SonicWall NSA 2700 Network Security/Firewall Appliance (02-SSC-7369)

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

Represents how many console ports are physically present on the product. The value is a simple integer indicating the total count of console connectors, regardless of type or version.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the device supports the DHCP client function, meaning it can automatically request an IP address and related network settings from a DHCP server.

Represents the total count of Ethernet LAN (RJ‑45) interfaces available on a product. The value is an integer indicating how many physical Ethernet ports are present, regardless of speed or generation.

The maximum rate at which a firewall can process or transmit network traffic, expressed in megabits per second (Mbits/s). It indicates the capacity of the device to handle data flow without bottlenecks.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The amount of thermal energy a product can dissipate, expressed in a standard unit such as BTU per hour or watts. It indicates the cooling requirement and helps compare how much heat the device generates during operation.

The total count of SFP+ (Small Form-factor Pluggable) transceiver modules physically installed in a networking device, such as switches or routers. This value indicates how many separate SFP+ slots are populated and can be used for high‑speed fiber or copper connections.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The electrical power consumption or output of the product, expressed in watts (W). It indicates how much energy the device uses during operation or how much power it can deliver to connected equipment.

A list of routing protocols that a device can use to forward network traffic, such as OSPF, RIP, BGP, EIGRP, IS‑IS, and VRRP. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The type of physical storage medium that a product uses or supports, such as flash memory, hard disk drive (HDD), solid‑state drive (SSD), eMMC, or combinations thereof. It indicates the underlying technology for data persistence and helps users compare devices based on their storage capabilities.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The overall amount of digital storage that can be held by the device, including all built‑in and removable options. The value is expressed as a numeric quantity followed by an appropriate unit such as GB, MB, or TB.

The total count of USB 3.2 Gen 1 (also known as USB 3.1 Gen 1 or SuperSpeed) ports available on the device, indicating how many peripherals can be connected simultaneously via this interface.

Represents the count of virtual private network (VPN) tunnels that a device or service can establish simultaneously. This value indicates how many independent secure connections are supported for remote access, site‑to‑site links, or other encrypted communications.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.