TRENDnet 4K H.265 POE Network Dome Camera (TV-IP319PI)

The f‑number (aperture value) of a camera lens or optical system, indicating the size of the aperture opening. It determines how much light enters the sensor and affects depth‑of‑field. Values are typically expressed as a numeric value prefixed with "F" (e.g., F1.2, F2.8) or as a single numeric value when the "F" is omitted.

The general classification of a camera, such as compact, single‑lens reflex (SLR), mirrorless interchangeable lens camera (MILC), bridge, or video camera. It indicates the form factor and primary use case of the device.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Represents the multiplier that indicates how many times an image or field of view is enlarged by digital zoom. The value is expressed as a number without units, such as "4x" or "1.5x", where the numeric part indicates the factor of increase.

The frequency of the alternating current supplied to a device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product and ensures proper functionality and safety.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum mains supply voltages compatible with the device across different regions.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The technology or model of the image sensor used in a camera or imaging device, such as CMOS, CCD, CIS, BSI, or other proprietary types. This attribute indicates how light is captured and converted into digital data.

The diagonal measurement of the image sensor in a camera or imaging device, expressed in inches or millimeters. It indicates the overall active area available for capturing light and is commonly used to compare sensor sizes such as 1/2.3", 1/1.7", APS‑C, Full‑Frame, etc.

The Ingress Protection (IP) rating indicates the level of protection a product has against solids and liquids, such as dust or water. It is expressed as two digits: the first digit for solid particle resistance and the second for liquid ingress protection.

The classification of a camera lens, indicating its optical design and intended use such as prime, zoom, wide‑angle, telephoto, macro or specialty types (e.g., fisheye, polarizing). It helps buyers understand the lens’s focal range, aperture characteristics, and typical shooting scenarios.

Indicates whether the product is capable of detecting motion in its environment. A value of "Yes" means that the device can sense movement and trigger internal processes, while "No" indicates that it lacks this functionality.

A list of the maximum data transfer rates that a network interface can support, expressed in bits per second or common abbreviations such as Gbps or Mbps. Each value indicates a speed that the device is capable of achieving over a wired connection.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.

The classification of the power adaptor used with a device, indicating whether it is external or internal, its electrical interface (AC, DC, USB‑Charging, etc.), and any specific form such as integrated or travel adapters. This attribute helps buyers understand how the device receives power and what kind of connector or cable is required.

Represents the total count of RJ‑45 Ethernet interfaces present on a product. Each port can accept a standard Ethernet cable for wired network connectivity.

A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

Indicates whether a product can withstand exposure to outdoor elements such as rain, wind, and temperature fluctuations without damage. The value is typically "Yes" or "No", but may also include descriptive terms like "Weatherproof" or "Weather‑resistant" that convey the same meaning.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The set of white‑balance settings available for a camera or imaging device. Each mode adjusts the color temperature and tint to compensate for different lighting conditions (e.g., Auto, Cloudy, Daylight, Flash, Tungsten). The attribute may contain a single value or a list of selectable modes.