V7 3m Yellow CAT6 Shielded Patch Cord

Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.

The minimum and maximum f‑number (aperture value) that a camera lens or optical system can achieve, expressed as a numeric range (e.g., "F1.4-F16") or a single value when only one aperture is available. It indicates the zoom and light‑gathering capability of the lens.

Indicates whether the device can automatically detect and configure MDI or MDI‑X connections for network cables, simplifying cable management and reducing manual setup.

Indicates whether the device automatically negotiates link parameters such as speed, duplex mode and flow control with a connected partner, ensuring optimal communication settings without manual configuration.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.

The total count of individual black ink cartridge units included with the product or supplied in its standard package. It indicates how many separate black cartridges—such as those used for printing—are available for use or replacement when the item is purchased.

The total number of printable pages that a black ink cartridge or refill can produce before it needs replacement. This value represents the print yield capacity for the consumable and helps users estimate how many documents they can print with a single unit.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear measurement across a circular or round cable, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the cable.

Indicates whether the product includes a built‑in system for organizing, routing, or securing cables. The value can be "Yes" when a cable management feature is present, "No" when it is absent, or a descriptive term such as "Cable Inlay System (CIS)" or "Cable Management System (CMS)" that specifies the type of integrated solution.

The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.

The category or technology of a cable, such as Cat5e, Cat6, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

The yield rating of a printer cartridge, indicating the approximate number of pages or units it can produce before replacement is needed. Common ratings include "Standard Yield", "High (XL) Yield", and "Extra (Super) High Yield".

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The material or construction style of the cable’s conductors, such as stranded copper, solid copper, or other conductive materials. It indicates how the individual wires are arranged and what material they are made of, which affects flexibility, durability, and signal integrity.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

Indicates the gender or sex classification of a connector, such as Male, Female, or Unspecified. This attribute helps users identify whether a cable or port is designed for insertion (Male) or reception (Female).

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The measured distance between the two opposite surfaces of a desk’s top or base, expressed in a linear unit such as millimeters or inches. It indicates how thick the desk is and helps assess durability, weight, stability, and compatibility with accessories or mounting hardware.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

The maximum count of display units that a product can accommodate or operate simultaneously, such as monitors, TVs, or other visual output devices. This value indicates how many separate displays the system is designed to support in its current configuration.

A free‑text list of hazardous chemicals that may be present in the product, such as heavy metals, flame retardants or other regulated substances. The value is a comma‑separated string of chemical names or identifiers.

The optical fibre configuration that determines how light propagates through the core, typically "Single‑mode" for narrow cores and single wavelength transmission or "Multi‑mode" for wider cores supporting multiple propagation paths. This attribute indicates whether a cable is designed for single‑mode or multi‑mode operation, which affects compatibility with transceivers, distance limits and bandwidth.

Indica el formato o estándar de la tarjeta de memoria flash que se utiliza en un producto, como MicroSDXC, SDHC, CompactFlash, etc. Este atributo ayuda a identificar la compatibilidad física y de protocolo entre la tarjeta y el lector o el equipo.

The performance class of a flash memory card, indicating its minimum sustained write speed and reliability. Common values include "Class 10", "Class 4", "Class 3" and occasionally "No" to denote that the device does not support flash memory.

Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.

The distance between the optical center of a lens and its image plane, expressed in millimetres. It can be a single value for fixed‑focal lenses or a range indicating the minimum and maximum focal lengths covered by zoom optics. This measurement helps users understand the field of view and zoom capability of cameras, lenses, and other optical devices.

The minimum and maximum focal lengths that a lens or optical system can cover, expressed in millimetres (mm). It indicates the zoom capability of the device and helps users understand the field‑of‑view range available.

The operating frequency of a device or component, expressed in hertz (Hz). It represents the number of cycles per second that the product’s internal circuits or wireless radios can run and is useful for comparing performance across similar products.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The ability of a product to change its vertical dimension, typically measured in millimetres, centimetres or inches. It indicates whether the user can raise or lower the item and, if so, by how much. This attribute applies to monitors, desks, furniture, stands and other equipment that offer adjustable height.

The maximum vertical distance by which a product’s height can be increased or decreased, expressed as a numeric range in millimetres, centimetres or inches. It indicates the full span of motion available for adjusting height on devices such as monitors, desks, furniture or other adjustable equipment.

Indicates the mechanism that allows a product’s vertical position to be changed, such as manual lever, gas spring, or electric motor. This attribute helps buyers understand how easily and smoothly the height can be adjusted.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

The type of image sensor used in a camera or imaging device, such as APS‑C, Full frame, Micro Four Thirds, FX, etc. The value may be a single sensor type or a comma‑separated list when the product supports multiple formats.

The electrical current drawn by a device when powered, expressed in amperes (A). It indicates how much current the product consumes from its power source during normal operation and can be used to assess compatibility with power supplies or USB ports.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

The outer jacket material is the substance that forms the protective sheath or covering of a product, such as cables, hoses, or enclosures. It determines durability, fire‑resistance, and suitability for specific environments. Common materials include PVC, LSZH, TPE, nylon, ABS, and their combinations.

The largest Ethernet frame size in bytes that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

List of lens mount interfaces supported by a camera or lens, such as Canon EF, Nikon F, Sony E‑mount, Micro Four Thirds, etc. The value can be a single interface name or a comma‑separated list of multiple compatible mounts.

The aspect ratio describes the proportional relationship between the width and height of a lens’s image circle or sensor coverage, expressed as a simple fraction (e.g., 12/9). It indicates how wide or tall the captured image will be relative to its other dimension. This value helps users compare lenses for compatibility with camera sensors and desired framing.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The highest f‑number (aperture value) that a camera lens can achieve when fully wide open. It indicates the maximum light‑gathering capability of the lens and is expressed as an integer or decimal without units.

The optical magnification factor of a camera lens, expressed as a multiplier (e.g., 2x, 10x). It indicates how many times larger an object appears compared to its actual size when viewed through the lens.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

The highest mass that a product or component can safely support, expressed in a standard unit such as kilograms or pounds. This value is used to determine load limits for mounting, transportation, and handling.

Indicates whether the product comes with a memory card adapter (e.g., SD or microSD adapter) included in the package. A value of "Yes" means an adapter is supplied, allowing the user to use compatible memory cards; a value of "No" means no adapter is provided and must be purchased separately.

Indicates whether the cable includes a molded boot that protects the connector and provides strain relief. A value of "Yes" means the boot is present; "No" means it is absent.

The physical configuration or method used to secure a product, such as clamp, bolt‑through, vertical, horizontal, rack mounting, freestanding, wall mounting, or other installation approaches.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

The total count of individual diaphragm blades included in the product. It indicates how many separate blades are present, which can affect performance characteristics such as airflow or pressure control.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

Indicates the preferred or supported orientation of a product, such as landscape, portrait, horizontal/vertical, or other directional settings. This attribute helps users understand how the device can be positioned for optimal use.

A list of operating system names and versions that the product can run or support beyond its primary OS, including both commercial and open‑source distributions. Each value represents a distinct OS that is compatible with the hardware or software.

The linear measurement across the widest part of a cylindrical or round object, taken through its center. It is expressed in units such as millimeters, centimeters, inches, or feet and represents the overall width that determines fit, compatibility, and visual proportions.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Indicates whether the product can rotate or swivel as part of its functionality, such as a rotating monitor stand or rotating camera mount.

A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

A list of network communication protocols that a device can use or support, such as TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, and various wireless standards. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.

Indicates whether a product includes protection against voltage spikes, such as built‑in surge suppressors or UPS units that can absorb excess energy. A value of "Yes" means the device has active surge protection; "No" indicates it does not. In some cases the attribute may also record the energy rating (e.g., 2690 J) to quantify how much surge energy the device can handle.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.

The maximum electrical power that a network device can supply to connected Power over Ethernet (PoE) devices, expressed in watts (W). It represents the total PoE budget available for powering attached equipment such as switches, access points, or cameras.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

The UHS Speed Class indicates the minimum sustained write speed of an SD or microSD card, expressed as a class such as "Class 3 (U3)" or "Class 1 (U1)". It helps users compare cards for high‑performance applications like video recording or rapid data transfer.

Indicates whether the product can be securely mounted to a wall or other vertical surface using standard mounting hardware.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.