V7 CAT6 Ethernet Shielded STP 01M Red

Specifies the type of autofocus motor used in a lens or camera component, indicating its mechanism and performance characteristics. Common values include USM (Ultrasonic Motor), STM (Stepping Motor), HSM (Hyper Sonic Motor) and others. This attribute helps users compare autofocus speed, noise level, and compatibility with camera bodies.

Indicates whether the device has an automatic focusing system that adjusts the lens or sensor focus without user intervention.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear measurement across a circular or round cable, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the cable.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

The classification or category of a cable, indicating its technical specifications such as shielding type, conductor gauge, and intended use. It helps users identify the appropriate cable for their equipment and network requirements.

The type of shielding applied to a cable or its connector, indicating whether the cable is shielded against electromagnetic interference and specifying common shielding configurations such as UTP, FTP, S-FTP, or unshielded. This attribute helps users identify compatibility with devices that require specific shielding levels.

The technical classification of a cable, such as Cat5e, Cat6, Cat7, or other industry‑defined standards. It indicates the cable’s performance characteristics and compatibility with networking equipment.

The category or technology of a cable, such as Cat5e, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

The type of cable or connector technology used by the product, such as Ethernet standards (e.g., 10/100Base‑T, 1000BASE‑T, 10GBase‑T) or other networking cable types. It indicates the physical medium and protocol supported for data transmission.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

The yield rating of a printer cartridge, indicating the approximate number of pages or units it can produce before replacement is needed. Common ratings include "Standard Yield", "High (XL) Yield", and "Extra (Super) High Yield".

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The average number of pages a printer cartridge or ink bottle can produce before it needs replacement, expressed as a numeric value followed by the unit "pages". It indicates typical print capacity for the product under normal operating conditions.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The material or construction style of the cable’s conductors, such as stranded copper, solid copper, or other conductive materials. It indicates how the individual wires are arranged and what material they are made of, which affects flexibility, durability, and signal integrity.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

A free‑text list of hazardous chemicals that may be present in the product, such as heavy metals, flame retardants or other regulated substances. The value is a comma‑separated string of chemical names or identifiers.

The total number of write cycles that a storage device can sustain on each logical sector before failure is expected. This figure indicates the durability of flash memory and helps users estimate how long the device will last under typical usage conditions.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

The optical fibre configuration that determines how light propagates through the core, typically "Single‑mode" for narrow cores and single wavelength transmission or "Multi‑mode" for wider cores supporting multiple propagation paths. This attribute indicates whether a cable is designed for single‑mode or multi‑mode operation, which affects compatibility with transceivers, distance limits and bandwidth.

The distance from the optical center of a lens to its image plane when the lens is set at its working focus, expressed in a standard length unit such as millimetres or centimetres. It indicates the angle of view and zoom capability of an optical system and helps users compare lenses with different fixed focal lengths.

Indica el formato o estándar de la tarjeta de memoria flash que se utiliza en un producto, como MicroSDXC, SDHC, CompactFlash, etc. Este atributo ayuda a identificar la compatibilidad física y de protocolo entre la tarjeta y el lector o el equipo.

The operating frequency of a device or component, expressed in hertz (Hz). It represents the number of cycles per second that the product’s internal circuits or wireless radios can run and is useful for comparing performance across similar products.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The ability of a product to change its vertical dimension, typically measured in millimetres, centimetres or inches. It indicates whether the user can raise or lower the item and, if so, by how much. This attribute applies to monitors, desks, furniture, stands and other equipment that offer adjustable height.

The maximum vertical distance by which a product’s height can be increased or decreased, expressed as a numeric range in millimetres, centimetres or inches. It indicates the full span of motion available for adjusting height on devices such as monitors, desks, furniture or other adjustable equipment.

The type of image sensor used in a camera or imaging device, such as APS‑C, Full frame, Micro Four Thirds, FX, etc. The value may be a single sensor type or a comma‑separated list when the product supports multiple formats.

Indicates whether the device includes an image stabilization system, either optical or electronic, that reduces camera shake to produce sharper photos and smoother video recordings.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The type of material used to construct the outer jacket or sheath of a product, such as PVC, LSZH, TPE, nylon, ABS, or combinations thereof. This attribute helps users understand durability, fire‑resistance, and suitability for specific applications.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

Indicates whether a camera lens or accessory includes a protective hood that covers the front element to reduce flare, glare and accidental contact with the glass.

The aspect ratio describes the proportional relationship between the width and height of a lens’s image circle or sensor coverage, expressed as a simple fraction (e.g., 12/9). It indicates how wide or tall the captured image will be relative to its other dimension. This value helps users compare lenses for compatibility with camera sensors and desired framing.

The classification of a camera lens, indicating its optical design and intended use such as prime, zoom, wide‑angle, telephoto, macro or specialty types (e.g., fisheye, polarizing). It helps buyers understand the lens’s focal range, aperture characteristics, and typical shooting scenarios.

Indicates whether the camera or lens can be focused manually by the user, typically using a focus ring or lever. A value of "Yes" means manual focusing is available; "No" indicates that focusing is automatic only.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The highest f‑number (aperture value) that a camera lens can achieve when fully wide open. It indicates the maximum light‑gathering capability of the lens and is expressed as an integer or decimal without units.

The highest electrical current that a device can safely draw from its power source, expressed in amperes (A). It indicates the maximum load the product is designed to handle during normal operation and helps users verify compatibility with power supplies or sockets.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

The largest VESA mounting pattern that a product supports, expressed as two horizontal and vertical dimensions in millimetres (for example, "100 × 100 mm"). This value indicates the exact hole spacing required for a compatible wall or desk mount.

The highest mass that a product or component can safely support, expressed in a standard unit such as kilograms or pounds. This value is used to determine load limits for mounting, transportation, and handling.

The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.

The total count of openings, such as holes or ports, present in a product. This value indicates how many separate apertures are available for access, ventilation, or connection purposes.

The smallest diagonal measurement of a display that a mounting product can securely support, expressed in inches or centimeters. This value helps buyers determine whether a particular monitor, TV, or other flat‑panel device will fit the mount.

Specifies the smallest VESA mounting pattern that a product supports, expressed as two numeric values in millimetres (e.g., "75 × 75 mm"). The value indicates the minimum hole spacing required for a wall or desk mount to securely attach the device.

Indicates whether the cable includes a molded boot that protects the connector and provides strain relief. A value of "Yes" means the boot is present; "No" means it is absent.

The physical configuration or method used to secure a product, such as clamp, bolt‑through, vertical, horizontal, rack mounting, freestanding, wall mounting, or other installation approaches.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

The total count of distinct colours that a display can render, typically expressed in millions or billions. This figure reflects the colour depth and determines how smoothly gradients and subtle hues are reproduced on the screen.

The total count of individual diaphragm blades included in the product. It indicates how many separate blades are present, which can affect performance characteristics such as airflow or pressure control.

A unique alphanumeric identifier assigned by the original equipment manufacturer that distinguishes a specific product model or variant. It is used for cataloging, inventory management, and support purposes.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The pair of horizontal and vertical dimensions in millimetres that a product supports for VESA mounting (e.g., "100 × 100 mm"). This value indicates the exact hole spacing required by a mounting bracket to secure the device. It is used for monitors, TVs, projectors and other display equipment that can be wall‑mounted or attached to stands.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The shape or design of a writing instrument’s tip, such as bullet, chisel, fine, fibre, broad, or rollerball. It indicates the point geometry that determines how ink is applied to paper and affects line width, precision, and suitability for different tasks.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

The UHS Speed Class indicates the minimum sustained write speed of an SD or microSD card, expressed as a class such as "Class 3 (U3)" or "Class 1 (U1)". It helps users compare cards for high‑performance applications like video recording or rapid data transfer.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A comma‑separated list of colour names that a writing instrument (pen, marker, highlighter) can produce or display. The values are simple colour names such as "Black", "Blue", "Red" and may include multiple entries separated by commas.