V7 CAT6 Ethernet Shielded STP 10M Black

Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.

The minimum and maximum f‑number (aperture value) that a camera lens or optical system can achieve, expressed as a numeric range (e.g., "F1.4-F16") or a single value when only one aperture is available. It indicates the zoom and light‑gathering capability of the lens.

Indicates whether the product includes a standard ATX power connector with 24 pins, which is used to supply main power to motherboards and other components in desktop computers.

Indicates whether the device has an automatic focusing system that adjusts the lens or sensor focus without user intervention.

Indicates whether the device can automatically detect and configure MDI or MDI‑X connections for network cables, simplifying cable management and reducing manual setup.

The American Wire Gauge (AWG) size of a conductor, expressed as an integer that indicates the wire’s diameter and cross‑sectional area. Lower numbers represent thicker wires with higher current capacity; higher numbers indicate thinner conductors suitable for lower currents or signal applications.

Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear measurement across a circular or round cable, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the cable.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a built‑in system for organizing, routing, or securing cables. The value can be "Yes" when a cable management feature is present, "No" when it is absent, or a descriptive term such as "Cable Inlay System (CIS)" or "Cable Management System (CMS)" that specifies the type of integrated solution.

The classification or category of a cable, indicating its technical specifications such as shielding type, conductor gauge, and intended use. It helps users identify the appropriate cable for their equipment and network requirements.

The type of shielding applied to a cable or its connector, indicating whether the cable is shielded against electromagnetic interference and specifying common shielding configurations such as UTP, FTP, S-FTP, or unshielded. This attribute helps users identify compatibility with devices that require specific shielding levels.

The technical classification of a cable, such as Cat5e, Cat6, Cat7, or other industry‑defined standards. It indicates the cable’s performance characteristics and compatibility with networking equipment.

The category or technology of a cable, such as Cat5e, HDMI, USB, SATA, fiber optic, or other transmission types. It identifies the primary function and compatibility of the cable with devices and systems.

A list of camera brand names that the product is compatible with, such as Canon, Nikon, Sony, Fujifilm, Panasonic, and others. Each entry should be a single brand name; multiple brands can be separated by commas or listed individually in a multi‑value field.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

The yield rating of a printer cartridge, indicating the approximate number of pages or units it can produce before replacement is needed. Common ratings include "Standard Yield", "High (XL) Yield", and "Extra (Super) High Yield".

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

Indicates whether a computer chassis includes a dedicated intrusion connector, which allows the attachment of security or monitoring devices to detect unauthorized access. A value of "Yes" means the connector is present; "No" means it is absent.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The total count of individual ink cartridge units that are included with a printer or other printing device in its standard package. It indicates how many separate cartridges—such as cyan, magenta, yellow, black, and any additional color or pigment cartridges—are available for use or replacement when the product is purchased.

The average number of pages a printer cartridge or ink bottle can produce before it needs replacement, expressed as a numeric value followed by the unit "pages". It indicates typical print capacity for the product under normal operating conditions.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The substance used for the electrical conductor in a cable or connector, such as copper, aluminum, or other conductive alloys. This attribute indicates the primary material that carries current and influences conductivity, durability, and cost.

The material or construction style of the cable’s conductors, such as stranded copper, solid copper, or other conductive materials. It indicates how the individual wires are arranged and what material they are made of, which affects flexibility, durability, and signal integrity.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical shape or configuration of the first connector on a device, indicating whether it is straight, angled, right‑handed, left‑handed, rotating, foldable, or another form. This attribute helps users identify how the connector aligns with cables and ports.

The metal coating applied to the contacts of a connector, such as gold, nickel, copper or chrome. It provides corrosion resistance, conductivity and durability for the electrical connections.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The measured distance between the two opposite surfaces of a desk’s top or base, expressed in a linear unit such as millimeters or inches. It indicates how thick the desk is and helps assess durability, weight, stability, and compatibility with accessories or mounting hardware.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

Indicates whether the product includes a dedicated graphics processor separate from the integrated GPU, allowing higher performance for rendering and gaming tasks.

A free‑text list of hazardous chemicals that may be present in the product, such as heavy metals, flame retardants or other regulated substances. The value is a comma‑separated string of chemical names or identifiers.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The optical fibre configuration that determines how light propagates through the core, typically "Single‑mode" for narrow cores and single wavelength transmission or "Multi‑mode" for wider cores supporting multiple propagation paths. This attribute indicates whether a cable is designed for single‑mode or multi‑mode operation, which affects compatibility with transceivers, distance limits and bandwidth.

Indica el formato o estándar de la tarjeta de memoria flash que se utiliza en un producto, como MicroSDXC, SDHC, CompactFlash, etc. Este atributo ayuda a identificar la compatibilidad física y de protocolo entre la tarjeta y el lector o el equipo.

Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.

The minimum and maximum focal lengths that a camera lens or optical system can cover, expressed in millimetres (mm). It indicates the zoom capability of the device and helps users understand the field‑of‑view range available.

Specifies whether the camera’s focusing system operates automatically or requires manual adjustment. Common values include "Auto", "Manual", and combinations such as "Auto/Manual".

The operating frequency of a device or component, expressed in hertz (Hz). It represents the number of cycles per second that the product’s internal circuits or wireless radios can run and is useful for comparing performance across similar products.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

List of the physical interface(s) used by a hard drive together with the number of bays it occupies, such as "2 x SATA (2 x Bay)" or "1 x M.2 PCIe". This attribute helps users determine both the connection type and how many drives can be installed in an enclosure or system.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The ability of a product to change its vertical dimension, typically measured in millimetres, centimetres or inches. It indicates whether the user can raise or lower the item and, if so, by how much. This attribute applies to monitors, desks, furniture, stands and other equipment that offer adjustable height.

The maximum vertical distance by which a product’s height can be increased or decreased, expressed as a numeric range in millimetres, centimetres or inches. It indicates the full span of motion available for adjusting height on devices such as monitors, desks, furniture or other adjustable equipment.

Indicates the mechanism that allows a product’s vertical position to be changed, such as manual lever, gas spring, or electric motor. This attribute helps buyers understand how easily and smoothly the height can be adjusted.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

Indicates whether the product supports Intel Rapid Storage Technology, a software and firmware solution that enables RAID configurations, improves storage performance, and provides data protection features for compatible drives.

Indicates whether the product includes Intel Rapid Storage Technology Enterprise, a feature that enables advanced RAID configurations and performance optimizations for storage devices.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

The specific model identifier of an Intel Xeon processor, such as E5‑2600 or E3‑1200. This value allows users to determine compatibility with motherboards, operating systems, and other hardware components.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

The type of material used to construct the outer jacket or sheath of a product, such as PVC, LSZH, TPE, nylon, ABS, or combinations thereof. This attribute helps users understand durability, fire‑resistance, and suitability for specific applications.

The largest Ethernet frame size in bytes that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.

The specific model or designation of the LAN (network) controller integrated into a device, such as "Intel I219-V" or "Realtek RTL8111H." This value identifies the exact network interface hardware used for Ethernet connectivity, enabling users to compare performance, compatibility, and support across products.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The linear dimension of a product measured in a standard unit such as meters, centimeters or inches. It represents the overall size along one axis and is used to compare physical dimensions across similar items.

List of lens mount interfaces supported by a camera or lens, such as Canon EF, Nikon F, Sony E‑mount, Micro Four Thirds, etc. The value can be a single interface name or a comma‑separated list of multiple compatible mounts.

The aspect ratio describes the proportional relationship between the width and height of a lens’s image circle or sensor coverage, expressed as a simple fraction (e.g., 12/9). It indicates how wide or tall the captured image will be relative to its other dimension. This value helps users compare lenses for compatibility with camera sensors and desired framing.

The classification of a camera lens, indicating its optical design and intended use such as prime, zoom, wide‑angle, telephoto, macro or specialty types (e.g., fisheye, polarizing). It helps buyers understand the lens’s focal range, aperture characteristics, and typical shooting scenarios.

Indicates whether the camera or lens can be focused manually by the user, typically using a focus ring or lever. A value of "Yes" means manual focusing is available; "No" indicates that focusing is automatic only.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The material indicates the type of substance from which a product is made, such as metal, plastic, wood, glass, or composite materials. It helps users understand the product’s durability, weight, appearance, and suitability for specific applications.

The highest f‑number (aperture value) that a camera lens can achieve when fully wide open. It indicates the maximum light‑gathering capability of the lens and is expressed as an integer or decimal without units.

The longest linear distance that a cable can cover, expressed with a standard unit of length such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

Indicates whether the product comes with a memory card adapter (e.g., SD or microSD adapter) included in the package. A value of "Yes" means an adapter is supplied, allowing the user to use compatible memory cards; a value of "No" means no adapter is provided and must be purchased separately.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

Indicates whether the cable includes a molded boot that protects the connector and provides strain relief. A value of "Yes" means the boot is present; "No" means it is absent.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

The physical configuration or method used to secure a product, such as clamp, bolt‑through, vertical, horizontal, rack mounting, freestanding, wall mounting, or other installation approaches.

Indicates whether a product includes a mounting kit that allows it to be securely attached to a wall, rack, or other support structure. The value is typically "Yes" if the kit is included, or "No" if it is not.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

The model name or number of the integrated graphics adapter built into a device, such as a laptop or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The linear measurement across the widest part of a cylindrical or round object, taken through its center. It is expressed in units such as millimeters, centimeters, inches, or feet and represents the overall width that determines fit, compatibility, and visual proportions.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The count of physical expansion slots on a device that support the PCI Express interface with an x8 lane configuration. Each slot can accommodate devices such as graphics cards, storage controllers, or other peripherals that require eight lanes of data transfer.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The electrical plug configuration that the product uses to connect to a power source. It indicates the shape, number of pins and country or region standard (e.g., Type G, Type C, Type N). This attribute helps buyers identify compatibility with local outlets and determine if an adapter or converter is needed.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

A comma‑separated list of protective characteristics that a product offers, such as resistance to dust, water, shock, heat, or other environmental factors.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Indicates whether the product can rotate or swivel as part of its functionality, such as a rotating monitor stand or rotating camera mount.

A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.

Indicates whether the cable includes a snag‑free boot that protects the connector from damage and wear. A value of "Yes" means a snagless boot is present; "No" means it is absent.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of network communication protocols that a device can use or support, such as TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, and various wireless standards. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.

Indicates whether a product includes protection against voltage spikes, such as built‑in surge suppressors or UPS units that can absorb excess energy. A value of "Yes" means the device has active surge protection; "No" indicates it does not. In some cases the attribute may also record the energy rating (e.g., 2690 J) to quantify how much surge energy the device can handle.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

The maximum electrical power that a network device can supply to connected Power over Ethernet (PoE) devices, expressed in watts (W). It represents the total PoE budget available for powering attached equipment such as switches, access points, or cameras.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product can be securely mounted to a wall or other vertical surface using standard mounting hardware.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.