ViewSonic IFP7532 Interactive Display

The proportion between the width and height of a display, image or video, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios.

The type of backlighting used in a display panel, such as LED, WLED, CCFL or LCD. It indicates the illumination source that provides uniform light behind the screen for image rendering.

The amount of light emitted by a display or projector, expressed in lumens (cd/m² for luminance). It indicates how bright the screen will appear under typical viewing conditions.

The contrast ratio is the proportion between the brightest and darkest luminance a display can produce, expressed as a simple ratio such as 1000:1. It indicates how well a screen can differentiate light from dark areas, affecting image clarity and color depth.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The type of display panel used in a visual device, such as LED‑backlit LCD, IPS, TN, VA, or PLS. It indicates the underlying technology that determines image quality, color accuracy, viewing angles, response time and power consumption.

The visual technology used by the product’s screen, such as LCD, LED, OLED, TFT or analog. It indicates the underlying display panel that determines image quality, color reproduction and power consumption.

Indicates whether the product is designed, manufactured, or marketed with environmental considerations such as reduced energy consumption, recyclable materials, or compliance with eco‑friendly standards. A value of "Yes" means the product meets at least one recognized environmentally friendly criterion; "No" indicates it does not.

The total amount of data that can be stored in the device’s internal flash memory, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information can be saved on the device and helps users compare storage options across products.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The horizontal viewing angle is the maximum width, measured in degrees, that a user can see across a display or screen while maintaining acceptable visual quality. It represents how far left and right one can look without significant loss of clarity or distortion.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

Indicates whether the product has a coating that blocks ultraviolet (UV) rays at 100 % intensity, protecting skin and eyes from harmful exposure.

The total count of individual speaker units included in the product. It indicates how many separate speakers are present, whether built‑in or external, and helps users compare audio capabilities across models.

The total count of USB connectors available on the product. The value is a simple integer indicating how many USB ports are present, regardless of version or type.

The operating system installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The main operating system platform that the product runs on, such as Android, Windows, macOS, Linux, or other proprietary systems. It indicates which OS is required for installation or operation and helps users identify compatibility with their devices.

The total number of physical cores in a processor, indicating how many independent processing units are available for executing tasks simultaneously. A higher core count generally allows better multitasking and parallel performance across compatible software.

The specific model or designation of the central processing unit (CPU) used in a product, such as "Intel Core i7-10700K" or "AMD Ryzen 5 5600X". It identifies the processor brand and model number, which can be used to infer performance characteristics, compatibility, and supported features.

The main visual tone or finish that characterizes the exterior of a product. It can be a single solid hue, a combination of hues, or a special coating such as metallic or matte. This attribute helps users identify and compare items based on their appearance.

The time interval between a stimulus and the corresponding response of a device or system, expressed in units such as milliseconds (ms). It indicates how quickly the product reacts to input or processes data, which is critical for performance-sensitive applications like displays, gaming monitors, and interactive devices.

The electrical power that a device can deliver or consume, expressed in watts (W), measured as the root‑mean‑square (RMS) value of its output signal. This attribute represents the actual power output under normal operating conditions and is useful for comparing performance across similar devices.

The optical resolution of a scanner indicates the number of pixels that can be captured per unit length, expressed as width × height (e.g., 1200 × 2400). This value determines the sharpness and detail of scanned images.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render the visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The diagonal measurement of a display screen expressed in units such as inches or centimeters. It indicates the overall visual area available for content and is commonly used to compare monitors, televisions, laptops, tablets, and other electronic devices.

The method by which a device’s touch-sensitive display detects user input, such as multi‑touch, single‑touch, capacitive, resistive, infrared or optical. This attribute indicates the specific interaction technology employed in the screen.

The technology used by a device’s touch-sensitive display to detect user input. Common types include capacitive, resistive, infrared, and surface acoustic wave. This attribute helps users understand the interaction method, durability, and sensitivity of the touchscreen.

Specifies the VESA mounting pattern supported by a display or monitor, expressed as a pair of horizontal and vertical dimensions in millimetres (e.g., "100 × 100 mm"). The value indicates the exact hole spacing that a mounting bracket must match to secure the device.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.