Xerox 4760 Document Scanner (USB, 600 DPI, Duplex, A3)

The set of colour options that a scanner can produce when scanning an image or document. Each value represents a supported mode such as "Grayscale", "Monochrome", or "Colour" and may be listed separately if multiple modes are available.

Indicates whether a scanner can perform color scans. The value is "Yes" if the device supports color scanning, and "No" if it only performs monochrome scans.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

Indicates whether a device can scan both sides of a sheet in a single pass. A value of "Yes" means the scanner automatically captures the front and back of each page, while "No" indicates that only one side can be scanned at a time.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height (e.g., 216 × 356 mm). This value indicates the maximum area the device can scan without needing to cut or stitch images.

The minimum processor model required for a product to operate correctly. This attribute lists the specific CPU model or brand that meets the device’s baseline performance needs, such as "Intel Core i3-8100" or "AMD Ryzen 5 3600". It helps users verify compatibility and ensures the product will run with acceptable speed and features.

The smallest amount of system memory required for a product to operate correctly, expressed in gigabytes or megabytes. This value indicates the minimum RAM capacity that a device must have to run its software and hardware components without performance degradation.

The smallest amount of internal or built‑in storage that a product requires to operate, typically expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand the minimum space needed for the operating system, essential applications, and basic usage.

The pixel dimensions of a scanner’s optical sensor, expressed as width by height (e.g., 1200×2400). It indicates how many pixels can be captured per scan and determines the sharpness and detail of scanned images.

The number of distinct colours that a device’s output can represent, expressed as an integer followed by the unit "bit" (e.g., 24 bit). This metric indicates the richness and fidelity of colour reproduction for images or video sent to the device.

The type of electrical supply that powers the device, such as mains AC, DC, USB, battery, or a combination of these options.

A list of communication interfaces or software protocols that a scanner can use to transfer scanned images to a computer or network, such as TWAIN, WIA, SANE, ICA, ISIS, and others. Each entry represents an available option for connecting the device to capture software.

A list of destinations or methods to which a device can send scanned documents, such as email, FTP, cloud services, USB storage, or local PC. Each option represents a supported transfer protocol or target location for the scanned output.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.