AXIS Communications M3115-LVE 1080P Outdoor Network Camera with IR, 01604-001

The maximum angular displacement, measured in degrees, that a product or component can rotate from its reference position. It indicates the extent of movement available for adjustment or operation and is useful for understanding how far a device can pivot or tilt.

Indicates whether the product includes a built‑in hard drive that can be accessed directly without an external storage device. A value of "Yes" means the device has such a hard drive; a value of "No" means it does not.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

The linear measurement across a circular or round object, taken through its center. It is expressed in units of length such as millimeters, centimeters, inches, or feet and represents the widest span of the item.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Represents the total count of Ethernet LAN (RJ‑45) interfaces available on a product. The value is an integer indicating how many physical Ethernet ports are present, regardless of speed or generation.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

A collection of settings that can be modified to improve the visual appearance of an image or video, such as brightness, contrast, saturation, sharpness and other similar controls. Each value represents a distinct adjustment option available on the product.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

The specific kind of light-emitting diode technology used in the product, such as IR LED, RGB LED, COB LED, or addressable RGB LED. It indicates the emission characteristics and typical applications of the LED component.

The highest f‑number (aperture value) that a camera lens can achieve when fully wide open. It indicates the maximum light‑gathering capability of the lens and is expressed as an integer or decimal without units.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The physical dimensions of a camera’s image sensor, typically expressed as two measurements (width × height) with units in millimeters and inches. This attribute indicates the size of the sensor that captures light for each frame, influencing resolution, depth‑of‑field, and low‑light performance.

Indicates whether a product requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

A list of the positions or mounting options where a product can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The minimum and maximum angles, expressed in degrees, that a monitor can be tilted or adjusted vertically while maintaining acceptable performance or usability. It indicates the tilt limits for displays such as monitors, stands, or other adjustable equipment.

A list of video compression codecs that the product can encode or decode, such as H.264, H.265, VP9, M-JPEG, and others. Each value represents a codec that is natively supported by the device’s hardware or software.