Cisco C9200L-48T-4X 48-port Data Switch

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.

Indicates whether the product is designed, manufactured, or marketed with environmental considerations such as reduced energy consumption, recyclable materials, or compliance with eco‑friendly standards. A value of "Yes" means the product meets at least one recognized environmentally friendly criterion; "No" indicates it does not.

Specifies the type of wired Ethernet interface supported by a device, such as Gigabit Ethernet, 10 GbE, Fast Ethernet, or other variants. The value is a free‑text label that identifies the standard or generation of the Ethernet port(s) available on the product.

The type of expansion slot supported by the product, such as SFP+, SFP, XFP, or other module interfaces. It indicates the physical connector and protocol that can be inserted into the device to add network or storage capabilities.

The total count of physical expansion slots available on a device for installing additional modules or peripherals such as PCI‑Express cards, M.2 drives, USB adapters, or other expansion hardware. It indicates how many separate slots can be used simultaneously or swapped between the product and other devices.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The largest Ethernet frame size in bytes that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.

The network layer(s) that a device can operate at, expressed as an integer value (e.g., 2 for Layer 2, 3 for Layer 3). This attribute indicates the protocol stack level supported by the hardware or firmware.

A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The physical medium used by the network cable or transceiver, such as twisted pair copper or optical fiber. This attribute indicates which types of cabling are compatible with the device and helps users select the appropriate cable for their networking setup.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The type of network interface or protocol supported by the product, such as wired Ethernet standards (e.g., 10/100Base‑T, 1000Base‑T, 10GBase‑T) or wireless technologies (e.g., Wi‑Fi, Bluetooth). It indicates the primary networking capability that can be used for data transmission.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The amount of temporary storage that a device allocates in its internal memory for buffering data before processing or forwarding it. Expressed as a digital capacity (e.g., kilobytes, megabytes), this value indicates how much information the hardware can hold at once and influences performance when handling high‑throughput or bursty traffic.

The type of connector used to supply power to the device, such as AC‑in jack, DC‑in jack, USB Type‑C, SATA Power, or PCIe power connectors. It indicates the physical interface that delivers electrical energy to the product.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

A list of routing protocols that a device can use to forward network traffic, such as OSPF, RIP, BGP, EIGRP, IS‑IS, and VRRP. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

Indicates whether the device includes a shared Small Form‑Factor Pluggable (SFP) slot that can be used for network transceivers such as fiber or copper modules. A value of "Yes" means the product has at least one SFP socket available for user installation; "No" means no such slot is present.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.