Cisco Catalyst C9300-24P 24 Ports Manageable Ethernet Switch

Indicates whether the product supports an Access Control List (ACL) feature, allowing administrators to define rules that permit or deny network traffic based on criteria such as IP address, port number, or protocol.

Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.

Specifies the type of wired Ethernet interface supported by a device, such as Gigabit Ethernet, 10 GbE, Fast Ethernet, or other variants. The value is a free‑text label that identifies the standard or generation of the Ethernet port(s) available on the product.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.

The largest Ethernet frame size in bytes that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.

The network layer(s) that a device can operate at, expressed as an integer value (e.g., 2 for Layer 2, 3 for Layer 3). This attribute indicates the protocol stack level supported by the hardware or firmware.

The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.

The physical medium used by the network cable or transceiver, such as twisted pair copper or optical fiber. This attribute indicates which types of cabling are compatible with the device and helps users select the appropriate cable for their networking setup.

The type of network interface or protocol supported by the product, such as wired Ethernet standards (e.g., 10/100Base‑T, 1000Base‑T, 10GBase‑T) or wireless technologies (e.g., Wi‑Fi, Bluetooth). It indicates the primary networking capability that can be used for data transmission.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

Indicates whether the product can operate with a secondary or backup power supply to maintain functionality during primary power failure. A value of "Yes" means the device supports redundant power, while "No" indicates it does not.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The network layer(s) that a device can operate at, expressed as a string such as "L2", "L3" or combinations like "L2/L3". This attribute indicates the protocol stack level supported by the hardware or firmware.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.