Dual‑Connector Single‑Mode Fiber Patch Cable

Indicates whether the product includes a 2.5‑millimetre audio connector, commonly used for headphones or earphones. A value of "Yes" means the device has this port; "No" means it does not.

Indicates whether a product includes a standard 3.5 mm audio connector, the common analog jack used for headphones, microphones and other audio devices.

Indicates whether the product has built‑in support for 3‑dimensional (3D) content or displays. A value of "Yes" means the device can render or display 3D images, videos, or games; a value of "No" means it does not have native 3D capability.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether the product supports an Access Control List (ACL) feature, allowing administrators to define rules that permit or deny network traffic based on criteria such as IP address, port number, or protocol.

Indicates the configuration of an acoustic system, such as closed, open, semi‑open or semi‑closed. The value describes how sound is managed within the device and helps users understand its acoustic characteristics.

Indicates whether the device has a dedicated physical button that initiates or controls backup operations, such as creating data backups or restoring from them.

Indicates whether a device has the capability to create backups of its data or settings, allowing restoration in case of loss, failure, or interruption.

Indicates whether the device performs a bad block scan to detect and mark defective storage sectors. A value of Yes means the feature is available, while No means it is not.

The count of individual electrochemical cells that make up a battery pack. This number indicates how many separate cells are connected in series or parallel to provide the required voltage and capacity for the device.

Indicates whether the product can be powered by a battery, allowing it to function without an external power source.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The chemical composition or classification of a battery, such as alkaline, lithium‑ion, NiMH, or lead‑acid. It indicates the energy storage technology used in the product and helps users identify compatibility with devices that require specific battery chemistries.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

The specific version of the Bluetooth standard supported by a product, expressed as a numeric value (e.g., 4.2, 5.0) or with additional descriptors such as "+HS" or feature lists. This attribute indicates the capabilities and compatibility for wireless communication.

A list of web browsers that the product can run or support, typically including major desktop and mobile browsers such as Chrome, Firefox, Safari, Edge, Internet Explorer, Opera, and others. Each value represents a distinct browser name or version range that has been verified to work with the device.

Indicates whether the product includes a built‑in FTP server that allows file transfer and management over the network without requiring an external device.

The visual hue or combination of hues that a cable exhibits, expressed as common colour names such as "Black", "White" or comma‑separated lists like "Black, White". It indicates the appearance of the cable for identification and aesthetic purposes.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.

Specifies the type of interface or mechanism used to secure a cable in its port, such as Kensington, Noble, IBM, or other standard lock slots. This attribute helps users identify compatibility and security features of the device.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The physical form factor of a computer chassis, indicating its size and layout such as Tower, Desktop, Mini‑PC, or rack units (e.g., 1U, 2U). This attribute helps users identify the footprint, mounting options, and compatibility with other hardware.

The linear measurement across the outer boundary of a fiber optic cable’s cladding, expressed in units such as micrometres (µm), millimetres (mm) or centimetres (cm). It represents the width of the light‑guiding region that surrounds the core and determines compatibility with connectors, splicers and other optical components.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

A list of product names that are known to work with or be supported by this item, such as models, series, or specific configurations. Each entry represents a distinct product that can be used interchangeably or in conjunction with the current product.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical position of a connector on a product, such as top left, bottom right, front panel, rear panel or internal mounting point. It indicates where the interface is situated relative to the device’s exterior or interior layout, helping users identify installation points and compatibility with cables or accessories.

The physical interface or port used to connect a device to another component or system, such as USB, HDMI, RJ‑45, 3.5 mm jack, or fiber optic connectors. It indicates the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

The total duration a device can play audio continuously without interruption, expressed in standard time units such as minutes or hours. This value indicates the maximum autonomous listening period available on a single charge or power source.

The method or mechanism used to dissipate heat from a component such as a processor, graphics card, or other electronic part. It indicates whether the device relies on active cooling (fans or liquid pumps), passive heat sinks, or hybrid solutions, and helps users assess thermal performance and noise levels.

The linear measurement across the central optical core of a fiber cable, expressed in units such as micrometres (µm), millimetres (mm) or centimetres (cm). It represents the width of the light‑guiding region and is used to identify the fibre type (e.g., single‑mode vs multimode) and its compatibility with connectors and equipment.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

A free‑text label that identifies the general category or type of a device, such as "NAS", "Server", "Router", "Storage Enclosure" or any other descriptive class used by manufacturers to classify their products. The value is intended to help users quickly understand the primary function or form factor of the item.

Indicates whether the device supports the DHCP client function, meaning it can automatically request an IP address and related network settings from a DHCP server.

Indicates whether the device supports acting as a DHCP server, allowing it to assign IP addresses and network configuration settings to clients on the network.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

Indicates whether the product is certified to meet the Digital Living Network Alliance (DLNA) standards, enabling seamless media sharing and interoperability with other DLNA‑compliant devices on a network.

The classification of the audio driver used in a product, such as Dynamic, Neodymium, Hybrid, or Balanced. It indicates the technology that shapes sound reproduction and can influence tonal quality, sensitivity, and power handling.

Indicates whether a device can automatically update its IP address with a Dynamic DNS service, allowing remote access even when the public IP changes.

The type of ear attachment used by a headset or earphones, indicating how the device fits around or inside the ear. Common values include "Intraaural", "Circumaural", "Supraaural" and "On‑ear". This attribute helps users choose a model that matches their preferred fit and comfort.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.

Indicates whether the product comes with an external power adapter in its packaging. A value of "Yes" means a charger is supplied; a value of "No" means no charger is included and the user must obtain one separately.

The linear measurement across the widest part of a fan, expressed in units such as millimeters (mm), centimeters (cm) or inches (in). It represents the overall width of the fan and is useful for determining fit, compatibility with cases, and airflow characteristics.

The electrical potential difference supplied to a fan, expressed in volts (V). It indicates the nominal operating voltage required for the fan to run correctly and helps users match power supplies or adapters with compatible fans.

The optical fibre configuration that determines how light propagates through the core, typically "Single‑mode" for narrow cores and single wavelength transmission or "Multi‑mode" for wider cores supporting multiple propagation paths. This attribute indicates whether a cable is designed for single‑mode or multi‑mode operation, which affects compatibility with transceivers, distance limits and bandwidth.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

Indicates whether the product can be folded or collapsed for easier storage, transport, or compactness. A value of "Yes" means the item has a folding mechanism that allows it to be reduced in size; "No" indicates it is rigid and cannot be folded.

The shape or silhouette of the eyewear frame, such as Rectangle, Cat‑Eye, Round, etc. It describes the overall geometry that determines how the lenses are mounted and how the glasses fit the wearer.

The material used to construct the outer frame of a product, such as metal, plastic, wood, or composite blends. This attribute helps users understand durability, weight, appearance, and suitability for specific applications.

The operating frequency range of a device expressed in hertz (Hz). It indicates the specific radio frequencies that the product can transmit or receive, whether as a single value (e.g., 2.4 GHz) or a range (e.g., 2.4–5 GHz). This attribute helps users understand the wireless capabilities and compatibility of the device with network standards.

Indicates whether the product can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

Indicates whether a product’s screen has a glossy (shiny) or matte (non‑glossy) finish. A value of "Yes" means the display is glossy, while "No" indicates a non‑glossy surface.

Indicates whether the device includes a dedicated hardware-based encryption feature that protects data integrity and confidentiality through an embedded component.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

The span of audio frequencies that a product can accurately reproduce or respond to, expressed in hertz (Hz). It indicates the lowest and highest frequencies the device can handle, helping users assess suitability for music playback, communication, or signal processing applications.

The sensitivity of a headphone expressed in decibels (dB), indicating how much sound pressure the headphones can produce or detect for a given electrical input level. Values may be positive, negative, or zero and are typically measured at 1 kHz. This attribute helps users compare the loudness performance of different headphones.

The general classification of a headset based on how it delivers audio to the user, such as binaural (two‑channel), monaural (single‑channel), or other configurations. This attribute helps buyers understand whether the device provides stereo sound, single‑speaker output, or specialized listening modes.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the device includes an active backup unit (hot spare) that can automatically replace a failed drive without service interruption.

Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.

Indicates whether the product’s drive bays support hot‑swap, meaning drives can be inserted or removed while the device is powered on without shutting down or rebooting.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

The impedance value indicates the resistance that a component or circuit offers to alternating current, expressed in ohms (Ω). It is used to characterize speakers, microphones, audio cables and other electronic equipment to ensure optimal compatibility with the source signal.

The manner in which a product is mounted or positioned when installed, such as freestanding, built‑in, wall‑mounted, or portable. This attribute helps buyers understand how the item will be set up and whether it requires additional fixtures or supports.

The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.

The outer jacket material is the substance that forms the protective sheath or covering of a product, such as cables, hoses, or enclosures. It determines durability, fire‑resistance, and suitability for specific environments. Common materials include PVC, LSZH, TPE, nylon, ABS, and their combinations.

The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness, energy efficiency and color accuracy of the screen.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

Indicates whether the device can combine multiple network connections into a single logical link to increase bandwidth or provide redundancy.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

Indicates whether the product has magnetic properties that allow it to attract or hold magnets. A value of "Yes" means the item can be attracted by a magnet, while "No" indicates it does not exhibit magnetic behavior.

The vertical dimension of a product’s outer enclosure measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where the overall height of the external case is relevant, including electronics, appliances, furniture and packaged goods.

The linear dimension of a product’s outer case measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of similar items across categories.

The mass of a product’s external enclosure or shell, expressed in a standard unit such as grams or kilograms. It represents how heavy the outer case is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal dimension of a product’s outer enclosure measured in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The highest number of times per second that a display can update its image, expressed in hertz (Hz). It indicates the maximum refresh capability of the device and is useful for comparing visual performance across monitors, TVs, laptops, and other screen‑based products.

The highest pixel dimensions that a device can output or support over an HDMI connection, expressed as width by height (e.g., 3840x2160). It indicates the maximum resolution available for video playback or display through HDMI.

The largest diagonal measurement of a display that the product can accommodate, expressed in units such as inches or centimeters. It indicates the maximum screen size that will fit within the device’s enclosure or mounting area.

The largest VESA mounting pattern that a product supports, expressed as two horizontal and vertical dimensions in millimetres (for example, "100 × 100 mm"). This value indicates the exact hole spacing required for a compatible wall or desk mount.

The highest mass that a product or component can safely support, expressed in a standard unit such as kilograms or pounds. This value is used to determine load limits for mounting, transportation, and handling.

The number of physical memory slots that are present and available for installing RAM modules in a device. This count indicates how many separate memory sticks can be installed or upgraded.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The directional sensitivity of a microphone, indicating how it captures sound from different angles. Common patterns include omnidirectional (equal pickup from all directions), unidirectional or cardioid (focused on one direction), bidirectional (pickup from two opposite directions), and supercardioid or hypercardioid (narrower focus with some rear pickup). This attribute helps users choose a microphone that best suits their recording environment, whether they need wide coverage for group discus

The span of audible frequencies that a microphone can accurately capture, expressed as a minimum and maximum value in hertz (Hz). It indicates the lowest and highest tones the device can reproduce or record, helping users assess suitability for different audio applications.

The acoustic sensitivity of a microphone, expressed in decibels (dB). It indicates how effectively the microphone converts sound pressure into an electrical signal; lower (more negative) values mean higher sensitivity and better performance at low sound levels.

The classification of a microphone’s design or pickup pattern, such as condenser, dynamic, lavalier, boom, built‑in, handheld or other types. It indicates the physical form and typical usage scenario of the microphone.

The smallest diagonal measurement of a display that a mounting product can securely support, expressed in inches or centimeters. This value helps buyers determine whether a particular monitor, TV, or other flat‑panel device will fit the mount.

Specifies the smallest VESA mounting pattern that a product supports, expressed as two numeric values in millimetres (e.g., "75 × 75 mm"). The value indicates the minimum hole spacing required for a wall or desk mount to securely attach the device.

The physical configuration or method used to secure a product, such as clamp, bolt‑through, vertical, horizontal, rack mounting, freestanding, wall mounting, or other installation approaches.

The method or system by which a product is physically attached or supported, such as wall, desk, ceiling, floor, rack, or free‑standing. It indicates the intended installation location and any required hardware or mounting accessories.

Indicates whether a product supports multiple languages for its user interface, documentation or help resources. A value of "Yes" means the device offers language options beyond the default; "No" indicates it is limited to a single language.

The total count of individual screws included with a product or component. It indicates how many separate screw units are provided for assembly, mounting, or securing parts, regardless of size or type.

The total number of individual users that can be supported or accessed by the product or service. It represents a count of distinct user accounts, connections, or licenses and is expressed as an integer value.

Indicates whether the product includes an NVMe (NVM Express) interface for high‑speed solid state storage.

Indicates whether the product includes an on/off switch that allows the user to power it on or off manually.

Indicates whether the product can expand its storage capacity by adding additional drives or modules that are managed through a RAID configuration. A value of "Yes" means the device supports such expansion, while "No" indicates it does not.

Indicates whether the product supports migrating data from an external RAID system to its internal storage without downtime or additional hardware. A value of "Yes" means the device can perform this operation, while "No" indicates the feature is not available.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

The specific version of the operating system that a product supports or runs, expressed as a numeric revision (e.g., 10, 11) or a descriptive name (e.g., Nougat). This attribute helps users determine compatibility with software and updates.

Indicates whether a product requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

The physical position where the power supply unit is installed or mounted within a device, such as top, bottom, rear, side, front, or built‑in. This attribute helps users understand where to find the power source and plan cable routing or ventilation.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product contains a battery. A value of true means the device has an internal or removable battery, while false indicates it does not.

A brief statement of the intended or most suitable use cases for a product, such as the type of environment (indoor, outdoor), activity (gaming, office work, music listening) or general application category. It helps customers quickly determine whether the item fits their needs.

Indicates whether the device has a physical reset button that restores factory settings or original configuration when pressed.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

A list of network file‑sharing protocols that the device can use to expose shared folders or drives. Common values include CIFS/SMB, AFP, NFS, FTP, and WebDAV. The attribute helps users understand which remote access methods are available for mounting or accessing storage on the device.

Indicates whether the product allows users to manage access rights for shared folders. A value of "Yes" means that the device or service provides a mechanism to assign, modify, or revoke permissions on shared directories, enabling controlled sharing among multiple users.

Indicates whether the product supports Intel Smart Response Technology (or equivalent), a feature that uses flash memory as a cache to accelerate disk access and improve overall system performance.

Indicates whether the product has the capability to create point‑in‑time copies of its data or configuration, allowing recovery or backup without interrupting normal operation.

The physical form factor indicates the standard size and shape of an SSD, such as M.2, 2.5‑inch, U.2 or mSATA. It helps determine compatibility with motherboards, enclosures and other hardware components.

Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.

The total amount of data that a storage drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much information the drive can store and compare storage options across devices.

List of physical or logical interfaces that allow a storage drive to connect with other components, such as SATA, M.2 PCIe, U.2, SAS, NVMe or other standard connections.

The physical width of a storage drive measured in inches or millimetres, typically expressed as the diagonal size of the drive’s enclosure (e.g., 2.5" or 3.5"). This measurement indicates the form factor that determines compatibility with computer bays, external enclosures, and mounting brackets.

The total count of individual storage devices (hard disk drives or solid‑state drives) that are physically present in the product. It indicates how many separate drives are installed, regardless of capacity or interface type.

Indicates the types of products, users or environments for which the item is intended or compatible. The value can be a single category such as "Gaming" or a specific product type like "Computer case".

A comma‑separated list of file system formats that the product can read or write, such as FAT32, NTFS, ext4, exFAT, HFS+, and others. Each value represents a distinct storage format supported by the device’s firmware or operating system.

A list of the types of storage drives that a product can use, such as HDD or SSD. Each entry indicates a distinct drive type supported by the device, allowing users to understand which internal or external storage media are compatible.

The type of material that composes the outermost layer or finish of a product, such as metal, plastic, glass, ceramic, fabric, or composite blends. This attribute helps users understand durability, appearance, weight, and suitability for specific applications.

A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.

Indicates whether the product includes a system log feature that records events, errors, or status updates for troubleshooting and monitoring purposes. The value is a simple yes/no answer.

Indicates whether the product supports third‑party accessories or components that are not included with the device. A value of "Yes" means such accessories can be used, while "No" indicates they cannot.

The total amount of digital storage that a device or component can hold, expressed with an appropriate unit such as GB, MB, TB, or a descriptive label indicating whether the storage is built‑in or external. This value represents the maximum capacity available for storing data, applications, and media.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the product can automatically discover and communicate with other devices on the network using Universal Plug and Play (UPnP) protocols, enabling seamless configuration and media sharing without manual setup.

The linear distance that a USB cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.

The physical interface of the main USB port on a device, such as USB‑A, USB‑B, USB‑C, Micro‑USB or Mini‑USB. It indicates the shape and electrical characteristics that determine compatibility with cables, adapters and peripherals.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The total count of distinct video input ports that a device provides, such as HDMI, VGA, DVI, DisplayPort or other connectors. Each value represents how many separate video signals can be connected simultaneously to the product.

Indica el mecanismo o método con que se opera la función de ajuste de volumen en un producto, como botones físicos, controles giratorios, táctiles, digitales o combinaciones de estos. Los valores comunes incluyen "Tocar", "Botones", "Giratorio", "Control en línea" y otras variantes similares.

Indicates whether the device can be powered on remotely via Wake‑on‑LAN, allowing a network administrator or user to start it from sleep or off state using a network packet.

A textual description of the way a product is worn or fitted on the body, such as "headband", "earhook", "neck‑band", "over‑the‑ear", or "in‑ear". This attribute helps users understand how the item will be positioned and secured during use.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

Indicates whether the product includes a built‑in wireless LAN (Wi‑Fi) adapter that can connect to Wi‑Fi networks. A value of "Yes" means the device has an integrated WLAN module; "No" means it relies on external adapters or does not support Wi‑Fi.

The maximum dimensions (width × height) that a product can effectively use or display, expressed in compatible units such as millimeters or inches. This attribute indicates the usable space available for operation, installation, or content presentation and helps users determine whether the device fits their intended environment.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.